Professional Documents
Culture Documents
LABORATORIO DE SIMULACIÓN 1
Simula los siguientes circuitos. En tu reporte, incluye la imagen de los diagramas esquemáticas y
de las gráficas de simulación requeridas en cada paso.
2. Build the circuit shown in below in LTSpice/Micro-cap and then plot the voltage υ C(t) from 0
to 200 ms using Transient Analysis.
3. Build the active second-order circuit shown below, plot the signal υout from 0 to 5 ms, and note
how long it takes before the amplitude of the oscillations drops below 1 V. Change the value
of R2 to 100 kΩ and repeat the simulation. (You may need to readjust your timescale).