You are on page 1of 1

Power Section Specification (Imperial Units) 700-7864 (B)

7" 7:8 Lobes 6.4 Stages


Rotor Specifications Stator Specifications Performance Specifications
Overall Length 232.5 in. Overall Length 250.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.939 in. Tube OD 6.750 in. Rev per Unit Volume 0.305 Rev/Gal
Contour Length 225.5 in. Contour Length 234.00 in. Speed Range 91-183 RPM
Eccentricity 0.243 in. Tube ID 5.500 in. No Load Pressure Loss 151 psi
Major Diameter 4.425 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.000 in. Max ∆ Pressure 1,010 psi - 1,520 psi -
Head Length 7.00 in. Side 2: 8.000 in. Max Torque 8,740 ft-lbs - 13,110 ft-lbs -
Weight 782 lbs Weight 939 lbs Stall ∆ Pressure 1,520 psi - 2,280 psi -
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,110 ft-lbs - 19,660 ft-lbs -
Stator Minors and Fit (in.) at 70℉
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Monoflo R&M Monoflo Fit R&M Fit R&M Fit R&M Fit Monoflo Fit R&M Fit Monoflo Fit R&M Fit
T
0 S 3.949 -0.010 3.942 -0.003
1
2
3
4
5
6
7
8
Reline Lengths (in.) Monoflo: Max 250.1 Min 238 R&M: Max 0 Min 0 Alternate Stator OD: 6.75 (in.)

Torque Fit Increase


16000 0.1
14000
Fit Increase (in)

0.08
Torque (ft-lbs)

12000
10000 0.06
8000
6000 0.04
4000
0.02
2000
0 0
0 250 500 750 1000 1250 1500 1750 0 50 100 150 200 250 300
Differential Pressure (psi) Change In Temperature (°F)
Speed Mechanical Power
250 500
Mechanical Power (hp)

200 400 600 GPM


Speed (rpm)

600 GPM
150 300
450 GPM
450 GPM
100 200
300 GPM 300 GPM
50 100

0 0
0 250 500 750 1000 1250 1500 1750 0 250 500 750 1000 1250 1500 1750 2000
Differential Pressure (psi) Differential Pressure (psi)
©2016 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV. PS App v. 3.2.1221
Performance curves describe theoretical performance with 175℉ (79℃) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation
above maximum recommended limits will reduce life. Specification data are subject to change without notice.

You might also like