FABRIC CUT LIST: All parts presume .5” seam allowance
Qty. Vertical (belly out) Horizontal (hand to hand)
FACE PANELS: 2 FL+1”= FW+1”= (FP)
BOXING 1 FH+1”= 2FL+FW=
(B)
ZIP 2 FH+1”= FW+12”=
(Z)
WELT 2 1.5” 2FL+2FW+6=
● All parts should be labelled on the back/bottom edge.
● Welt is most often cut on a diagonal. ● If joining is required to achieve length for boxing or welting, remember to add 1” for each seam. You can certainly cut extra and trim what you don’t need later - sometimes this is a faster approach. ● Be wary of mixing up dimensions!!!!!!!! Since cushions are three dimensional, it’s very, very easy to confuse a term like “width” or “length” ● You can adjust the respective dimensions of your zipper and boxing depending on where you want your zipper to finish. Longer zippers are easier for cushion filling, but sometimes the sides of a cushion are visible.