Professional Documents
Culture Documents
CAN Channel - Flange Edge With Fabric Membrane Specification Information 28 March 2019
CAN Channel - Flange Edge With Fabric Membrane Specification Information 28 March 2019
3.31”
(84 mm) 5.67”
(144 mm)
0.91”
(23 mm) 3.50”
2” (51 mm) diameter end outlet (89 mm)
Product Table
51 mm (2.00”)
Length 700 800 900 1000 1200 1400
Stainless steel
mm (in) (27.55) (31.50) (35.43) (39.37) (47.24) (55.12)
coupling
Width 84 84 84 84 84 84
n/a
mm (in) (3.31) (3.31) (3.31) (3.31) (3.31) (3.31)
Part No.
Electro- 9010.72.91 9010.72.92 9010.72.93 9010.72.94 9010.72.95 9010.72.96 93874
polished
Specification Clause
The QuARTz ACO ShowerDrain channel and grate system shall be stainless steel grade 304 manufactured by ACO, Inc. USA.
The surface finish shall be Electropolished. Grate shall be Quadrato/Piano/Wave/Mix/Linear/Tile/Hawaii/Solid/Signature/ OR Glass.
Shower channels shall be 84 mm (3.31”) wide, flange provides overall width of 144 mm (5.67”) with length as specified on Architects
plans / Architects specification. Outlet spigot (O.D.) diameter shall be 51 mm (2.00”).
The stainless steel coupling connector [to provide connection to S/S spigot of shower channel and plumbing pipe system] shall be
supplied by ACO Inc.
The system shall be installed in accordance with the manufacturer’s instructions and recommendations.
SPEC
ACO Systems, Ltd.
INFO
Electronic Contact:
AN
C
Eml: info@acocan.ca
N