DISTRIBUTED BY
ANAKO PHILIPPINES CORPORATION
Page 1 of 6
MICROMATIC® STANDARD
Bison er Va UN RESPONSE UPRIGHT
SPRINKLER VK100 (K5.6)
“The Viking Corporation, 210 N Industrial Park Drive, Hastings Mi 49058,
169-945-9601 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvos@vikingcorp.com
Visit the Viking website forthe latest edition ofthis technical data page: www.vikinggroupine.com
4. DESCRIPTION
The Viking Micromatic® Standard Response Upright VK100 Sprinkler is a small, ther-
rmosensitve, glass-bulb spray sprinkler available In several diferent finishes and tem-
Prature ratings to mest design requirements. The special Polyester and Electroless
Nickel PTFE (ENT) coatings can be used in decorative applications. where colors are
desired. In addition, these coatings have been investigated for installation in corrosive
‘atmospheres and are listed/epproved as corrosion resistant as indicated in the Approval
Charts
Viking standard response sprinklers may be ordered andior used as open sprinklers (lass
bulb and pip cap assembly removed) on deluge systems. Refer to Ordering Instructions.
2. LISTINGS AND APPROVALS
Ms eULus Listed: Category VNIV
FM Approved: Ciasses 2001, 2002, 2015, 2017, 2043, a
NOTE: Other International approval certificates are available upon request.
Refer to Approval Charts and Design Criteria for listing and approval requirements that must be followed.
3. TECHNICAL DATA
Specifications:
Minimum Operating Pressure: 7 psi (0.5 bar)t
Maximum Working Pressure: 175 psi (12 bar) ww
Factory tested hydrostatically to 500 pei (34.5 bar)
‘Thread size: 1/2" NPT, 15mm BSP
Nominal K-Factor: 5.6 U.S. (80.6 metric")
Glass-bulb fuid temperature rated to -65 °F (-55 °C)
(Overall Length 2-38" (60 mm)
+ elLus Listng, FM Approval. and NFPA 13 intalls requ a minimum of 7 psi (05 bar. The minimum operating pressure for LPCE and CE
‘Approvals ONLY is ps (0.38 ba),
“ Metis K factor measurement shown sn Bar, When pressure is measured in KPa, divide the mete K factor shown by 10.0,
Material Standards:
Frame Casting: Brass UNS-C84400 or QM Brass
Deflector: Brass UNS-C23000 or Copper UNS-C19500
Bulb: Glass, nominal 5 mm diameter
Bellevile Spring Sealing Assembly: Nickel Alloy, coated on both sides with PTFE Tape
Screw: Brass UNS.C36000
Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Stee! UNS-S30400
or Polyester Coated Sprnilers: Belleville Sprig-Exposed
For ENT coated Sprinklers; Belevile Spring - Exposed, Screw and Pipeap - ENT plated.
‘TtNot for FM Approval
(Ordering Information: (Also refer to the current Viking price list)
Order Wicromatic® Standard Response Upright VK100 by frst adding the appropriate suffix forthe sprinkler finish and then the
‘appropriate sux for the temperature rating fo the sprinkler base part number
Fish Sux: Brass = A, Chrome = F, White Polyester = MW, Black Polyester = MHB, Wax Coated = C, Wax Over Polyester = V-W,
ENT = JN,
Temperature Suffix: 135 °F (67 °C) =A, 155 °F (68 °C) = B, 175 °F (79 °C) = D, 200 °F (98 °C) = E, 212 °F (100 °C) = M, 286 °F
(141 °C) = G, 360 °F (182 °C) =H, $00 °F (260 °C) = L
For example, sprinkler VK100 with a 1/2" thead, Brass finish and a 155 °F (68 “C) temperature rating
Available Finishes And Temperature Ratings: Refer to Table 1
art No. 12086AB,
Form No, F_052014 19.10.14 Rev 19.1 Replaces Form No. F_052014 Rev 17.1.P65
(Added ENT, updated FM language.)
Wee goannas) oa aeDISTRIBUTED BY
ANAKO PHILIPPINES CORPORATION
Page 2 of 6
® MICROMATIC® STANDARD
4 TECHNICAL DATA RESPONSE UPRIGHT
SPRINKLER VK100 (K5.6)
“The Viking Corporation, 210 N Industrial Park Drive, Hastings Mi 49058
Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsves@vikingcorp.com
Visit the Viking website for the latest edition of this technical data page: wiw.vikinggroupine.com
‘Accessories: (Also refer to the Viking website)
Sprinkler Wrenches:
{K Standard Wrench: Part No. 21475M/B (available since 2017),
8. Standard Wrench for Wax Coated Sprinkiers: Part No, 10B96W/S (availabe since 2000)
C. Socket Wrench for Wax Coated Sprinklers: Part No. 13577W/8* (available since 2006)
“AYE raleet is requted (rot avaiable tom Viking).
Sprinkler Cabinets:
[A Sichead capacity: Part No. 01724A (avallable since 1971)
BB. Twelve-head capacity: Part No. 01725A (avalable since 1871)
4, INSTALLATION
Refer to appropriate NFPA Installation
5. OPERATION
During fre conditions, the heat-senstive iqud in the glass bulb expands, causing the glass to shatter, releasing the pip cap and
sealing spring assembly. Water flowing through the sprinkler onfce strikes the sprinkler deflector, forming a unform spray pattern
to extinguish or control the fre,
6. INSPECTIONS, TESTS AND MAINTENANCE
Refer to NFPA 25 for Inspection, Testing and Maintenance requirements,
7. AVAILABILITY
‘The Viking Micromatic® Standard Response Upright Sprinkler VK10 is avaiable through @ network of domestic and international
distrbutors, See The Viking Corporation web site forthe closest distributor or contact The Viking Corporation.
8. GUARANTEE
For details of warranty, refer to Viking's curtent list price schedule or contact Viking directly.
Protective Sprinkler Cap,
Wrench Flat
‘Standard Sprinkler ‘Standard Sprinkler Wrench for Wax.
Wrench 21475M/B Coated Sprinklers 10896W/B
Figure 1
‘Standard Sprinkler Wrenches
Form No. F_052014 19.10.14 Rev 19.1
rs Guezon Avanve Cor Ease Guezon Oly
ite ena aaa a see
Quality!DISTRIBUTED BY
ANAKO PHILIPPINES CORPORATION
Page 3 of 6
® MICROMATIC® STANDARD
4 Biol o7 UeULN RESPONSE UPRIGHT
SPRINKLER VK100 (K5.6)
‘The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058
‘Telephone: 269-945.9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techeves@vikingcorp.com
‘Visit the Viking website for the latest edition ofthis technical data page: www.vikinggroupine.com
Unease nun anes
Ordinary 196 °F (67°C) 400 °F (98 °C) Orange
Ordinary 185 °F (68°C) 100 *F (38 °C) Red
Intermediate 175° (79°C) 450 °F (65°C) Yellow
Intermediate 200 °F (83°C) 150 °F (65°C) Green
igh 206 °F (141 °0) 225 °F (107 °0) Blue
Exira High 360 °F (182°C) 300 °F (149°C) Mauve
Ultra High? ‘500 °F (260 °C) 495 °F (240 °C) Black
Sprinkler Finishes: Brass, Chrome, White Polyester, Black Polyester, and ENT
Corrosion-Resistant Coatings': White Polyester, Sack Polyester, and Black PTFE in all temperature ratings. ENT in all temperature
ratings except 135 °F (67 °C). Wax-Coated Brass and Wax over Polyester for sprinklers withthe following temperature ratings:
155 °F (68°C) Lt. Brown Wax 175°F (79°C) Brown Wax 20°F (93°C) Brown Wax 286 °F (141 °C) Dk. Brown Wax
Footnotes
"The sprinkle temperature rating i stamped onthe deflector
+ Based on NFPA-13. Other limits may apply, depending on fre loading, sprinkler location, and other requrements ofthe Authority Having Jurisdiction,
Refer to speci instalation standards.
® Sprinkers of Ultra-High temperature rating are intended fr use inside ovens, dryers, or simlar enclosures wit normal operating temperatures above
{30°F (149°C). Where the ambient temperature around the Ura-High toperature rated sprinkler i significantly reduced below 200 °F (148 °C),
reponse time may be severely retarded
“The corsion-esistant coatings have passed the standard corrosion test required by the approving agencies indicatedin the Approval Charis. These
teste cannot and do not represent al possible cortosive environments. Pre o Inealiaon, very through the end-user thatthe coatings are com
pate with or suitable for the proposed envrenment. For automatic spankes, the coatngs indicated are applied to the exposed exterior surfaces
tent, Note tha the spring is exposed on sprinklers with Polyester and ENT costings. For ENT coated automatic sprinklers the watervay is coated
* Wax meting points 170 F (76 °C) for 286 “F (141 “C) temperature rated sprinklers
Form No.F_082014 19.10.14 Rev 19.1
eh) 5s oe) 427 0 | 32) 920985,
Mena aan cf) 2 cet Le:
jing in Quality!DISTRIBUTED BY
ANAKO PHILII
INES CORPORATION
Page 4 of 6
i MICROMATIC® STANDARD
4 bie er eA RESPONSE UPRIGHT
SPRINKLER VK100 (K5.6)
The Viking Corporation, 210 N Industrial Park Drive, Hastings Mi 49058
‘olophone: 269.945.9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsves@vikingcorp.com
Visit the Viking website for the latest edition ofthis technical data page: www.vikinggroupine.com
Sprinkter ‘Thread Size | Nominal K-Factor| Overall Length Listings and Approvals?
Base Part| SIN (Rete so to UL Design Criteria)
Number’ net | BSP | Us. | metrict | inches | mm eULust vas | Lpce ce
‘Standard Orifice
72086 [vKI00] 1 [tsmm] 66 | 608 [2] 67 | AiBs cA DZS = = =
"2000 | VK100 1smm| 56 | 06 | 204 | _s7 4.02.5
10138 [vKI00] 12 [15mm] 56 | eos | 214 | 67 | A1,B5,C4,D2.E5 =
0193 _[vK100/ [15mm] 56 | 08 S7_| At, B3, 04,0265 = = 7
‘Approved Temperature Ratings
A= 135°F (57 °O), 155 °F (68°C), 175 °F (79°C),
200 °F (93 °C), 208 “F (141 °C), and 380 °F (182 Approved Finishes
Foy 1 = Brass, Crome, White Polyester, and Blak Polyester*
18 135°F (67°C), 155°F (68°C), 175°F (79°C),| 2 Brass ana Chrome
and 200 °F (83°C) 23 War-Coated Brass and Wax Over Polyester
6 286 (141 *C) 4 High Temperatze 200 "F (83 °C) Wax Costing (corrosion resistant); maximum ambient te
-500°F (250°C perature alowed at eiing = 150 “F (65 °C)
E - 185 °F (68 °C), 175 *F (79 ‘C), 200 °F (93|5- ENT
c), 286 °F (141 °C) 360 °F (182°C), nd 500 |
260°c
Footnotes
* Base part number i shown, For complete part number, refer to Viking’scuret price schedule
® Metre Kato shown i fr use when pressure s measured in bar When pessute ls measured in KPa, die the merc Ktsctor show by 10.0
This table shows the Ising and approvals evaabe at te tmeof printing. Check with the manufacturer fr any acetonal approves
“Usted by Underwater Laboratories Ie. for use in the US. and Canada,
* eULus Listed a caroson resistant
"Otter colors are avaiable on request with he same Listings and Approvals asthe standard colors
” Spiers of Ulra-Hign temperature ratng are intended for use nee oven, yes, oF smiar enclosures with normal operating temperatures above|
$300" (140 °C) Where the amblen temperature sound the Ura-Highlemperature rated spanker 6 signticanly reduced below 800 F (149 “C),
{he response tme oe Uira High temperature rated sprinser may be severely retarcea,
‘The Ving Moromato" Standard Response Upright Sprinkler VK 100 cULUs Listed ae inscated in Approval Chart! forinstalaion in acoordanee th
the latest eden of NFPA 13 fr standard spray spree
“Designed for ue n Light. Ordinary, and Extra Hazaré occupancies.
+The sperterinsaation rules contained in NFPA 13 for standard spray upright spinklos must be flowed.
IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling inklers. Also refer to Bulleti
Form No. F_080614 for general care, installation, and maintenance information. Viking sprinklers are to be in-
stalled in accordance with the latest edition of Viking technical data, the appropriate standards of NFPA, LPCB,
APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and
standards, whenever applicable.
Form No, F_052014 19.10.14 Rev 19.1
‘Preauezon Averwe Cor Etea Quezon Ory
eth) 084s ea) 427 |=) 920989,
Henna ae sta) ne Leading in Quality!DisTRIBUTED BY
Page 5 of 6
® MICROMATIC® STANDARD
4 bier RUE RESPONSE UPRIGHT
SPRINKLER VK100 (K5.6)
‘The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058
Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-018-1680 Email: techsves@vikingcorp.com
Visit the Viking website forthe latest edition of this technical data page: www.vikinggroupine.com
Sprinkler Base | guy Thread Size | Nominal K-Factor | Overall Length FM Approvals?
Part Number’ NPT | &SP_| US. | metric! | inches | mm | _ (ReleralzofoDesin itera below)
Standard Orifice
12986 v«ioo | 12% | 18mm | 56 | 006 | 246 | 57 ‘At, B2, C3, D1, £4, FO
712003 vK100 ismm | 56 | 006 | 2068 | 67 At, D1, E4,F5, G5
10138 v«ioo | 12 | 15mm | 56 | 806 87 ‘At, B2, C3, D1, E4, FS
0103 v«ioo | ~ | 15mm | 56 | 806 7 At, 65, D1, E4,F6
‘Approved Temperature Ratings
1A: 135° (67°C), 155 *F (68 C), 175 F (79°C), 200 oved Finishes:
(93°C), 212 °F (100 °C), 288 "F (141 °C), and 360°F eee
feels 1 - Brass, Crome, White Polyester, and Back Polyester
B-135° (57°C), 196°F (8 °C), 175°F (79°C), 200°F | 2- Wax-Coated Brass (coresion resistant)
Semana 3 High Temperature 200 F (83 “C) Wax Coating (corrosion resistant): maximum ambient
pam weer temperature alowed at ceiing = 150 F (65°C)
E-185°F 68) 4 -Wax.Cooted Brass and Wax Over Polyester!
F -455° (68°C), 175 °F (797°C), 200°F (03°C), 88°F | 5 white Polyester anc Wa-Coated Brass (corsion resistant)
(141°C), 360 *F (182 °C), and 500 °F (260°C) fe EN
G.- 198 F (57°C), 155 °F (68°C), 178°F (79°C), and
200° (03°C)
Footnotes,
" Base part numbers shown. For complete part number, afer to Viking’ current price schedule,
# Metre K factor show i for use when pressure is measured in bar. When pressure is measured in KPa, vide the metic K‘actor shown by 10.0
° Thi table shows the stings and approvals avaiable athe time of printing. Check wih the manufacturer for any additonal approvals
* Otter colors are availabe on request with the same Approvals as the standard colors.
* Sprinklers of Utre-High temperature rating are intended for use inside ovens, yer, of simflar enclosures with normal operating temperatures above
1300 “F (149°C). Where the amblent temperature around the Ura-High terperatue rated sprinkler Is significa reduced below 300 "F (149°C),
the response time ofthe Utta-Hign temperature rated sprinkler may be severly retarsec
{FM approved as corasion resistant
EM. Aporoval Reauitements:
‘The Viking Micromatlc® Standard Response Upright Sprinkler VK100 is Is FM Approved as standard response Non-Storage upright sprinkler 28
tndeated in the FM Approval GUA. For specie application and instalation requrements, reference the latest applicable FM Logs Prevention Oata
‘Sheets (including Data Sheet 2-0). FM Global Loss Provertion Data Sheets conan guidelines relating to, but not lmied fo: minum water SuppiY
equrements,hyeaule design, eeting slope and obstucons, minum and maximum allowable spacing, and defector dstance below the celing
NOTE: The F¥ installation guidelines may differ from cULus andor NFPA criteria,
IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to Bulletin
Form No. F_080614 for general care, installation, and maintenance information. Viking sprinklers are to be in-
stalled in accordance with the latest edition of Viking technical data, the appropriate standards of NFPA, LPCB,
APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and
‘standards, whenever applicable.
Form No. F_062014 19.10.14 Rev 19.1
{7sQuezon Avenue Gor Easa Quezon Gly
We Ey 08 us (zo 0204 | 0) 20 989
We ts 82. aun (25) | 82) 9 40DDistRiBUTED 8
ANAKO PHILIPPINES CORPORATION
Page 6 of 6
MICROMATIC® STANDARD
RESPONSE UPRIGHT
SPRINKLER VK100 (K5.6)
‘The Viking Corporation, 210 N Industral Park Drive, Hastings Mi 49088
‘Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsves@vikingcorp.com
Visit the Viking website for the atest edition of this technical data page: wiww.vikinggroupine.com
Bron eA
a WW
_
a
‘Step 1: Carefully slide the
‘deflector, ensuring engage-
‘ment with the sprinklger
‘wrench flats,
Wax Coated
Upright Sprinkler
“*/A412" ratchet is required ‘Stop 2: Carefully press the wrench downward
(not available from Viking) ‘and ensure engagement with the sprinkler
‘wrench fats
Figure 2: Socket Wrench 1357706 for Wax Coated Sprinklers
Form No, F_052014 19.10.14 Rev 19.1
Replaces Form No. F_052014 Rev 17.1.P65
(Added ENT, updated Fl language.)
ites statues aes ea sama Le
ing in Quality!