Professional Documents
Culture Documents
en User Manual
581624 | REV. B | 06.2017 | APDMD032018
Technical Support
1-800-533-6127
For technical questions on your product, contact (800) 533-6127, and select
the option for technical support.
or email tech@otctools.com.
Copyright © 2018 Bosch Automotive Service Solutions Inc., All rights reserved.
The information, specifications, and illustrations in this guide are based on the latest information available
at the time of printing. Bosch Automotive Service Solutions reserves the right to make changes at any time,
without notice.
User Manual | Mitchell Diagnostics | Scan Tool | 1 | en
Selecting Vehicle............................................................. 14
AutoID..................................................................................... 14
Manual Entry......................................................................... 14
Recent...................................................................................... 16
Search by VIN......................................................................... 17
OBDII................................................................................. 18
Overview................................................................................. 18
Diagnostic Functions........................................................... 18
Data Stream............................................................................ 18
DTCs Modes............................................................................ 20
Oxygen (O2) Sensors............................................................ 21
Non-Continuous Tests......................................................... 22
Special Tests............................................................................ 22
Vehicle Info............................................................................. 23
Browser............................................................................ 25
Heavy Duty...................................................................... 26
Use of an attachment not recommended or Keep the battery away from children.
sold by the battery charger manufacturer
may result in fire, electric shock, or personal Do not store or leave your tool or battery
injury. near a heat source such as a radiator,
fireplace, stove, electric heater, or other heat-
Do not operate the tool with a damaged generating appliance or otherwise expose it
cord or connector. Replace damaged cords to temperatures in excess of 140 ºF (60ºC).
and connectors immediately. When heated to excessive temperatures,
battery cells could explode or vent, posing a
Do not operate the charger if it has received risk of fire.
a sharp blow, been dropped, or otherwise
damaged in any way. Take the charger to a Do not dispose of your tool’s battery in a fire
qualified service person. or with normal household waste. Battery
cells may explode. Discard a used battery
Do not disassemble the charger. Take the according to the manufacturer’s instructions
charger to a qualified service person if service or contact your local waste disposal agency
or repair is necessary. Incorrect reassembly for disposal instructions. Dispose of a spent
may result in electric shock or fire. Unplug or damaged battery promptly.
charger before attempting any maintenance
or cleaning. Turning off controls will not IMPORTANT: To avoid damage or generation
reduce this risk. of false data, make sure the vehicle battery
is fully charged and the connection to the
To prevent possible hearing damage, avoid vehicle Data Link Connector (DLC) is clean
using the tool at high volume levels for long and secure.
periods.
Do not place the tool on the distributor of a
Do not expose tool or charger to rain, vehicle. Strong electromagnetic interference
moisture, or snow. can damage the tool.
Verify that cords are located where they will Never disconnect or reconnect any
not be stepped on, tripped over, or otherwise electrical connector while the ignition is on.
become a safety hazard or subjected to Powertrain Control Module (PCM) damage
damage or stress. may result.
Use only batteries that are approved for
use with this tool. Use of other types may
increase the risk of fire or explosion.
General Information
Introduction
ss01711
9:40 3
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
MD-200
4
Handset Front 9 8 7 6 5
Handset Ports
ss01712
1 2 3 4 5 6
Handset Ports
1. Power port
3. SD card slot
needs to accept the license agreement. Then, the Using the handset
user will have three choices:
There are three options for use.
• Register Now: Unlocks all functions of handset.
• Trial mode: Unlocks all functions for 30 days. • Register Now: It is recommended to register
• Demo Mode: Displays what functions may look for full functionality of tool and tech support.
like. • Trial Mode: This allows use of the handset for
Periodically, updates will become available and the user 30 days before it must be registered. If the 30
will be notified by an icon on the screen. To update the day trial period is over before it is registered,
handset, there must be Wi-Fi connection available. the handset functions will be locked out. At
that time, register now or demo mode will
Software Applications need to be entered.
• Demo Mode: This mode demonstrates the
Overview
functions by displaying random data.
The handset allows users to diagnose problems on ss01715
a wide variety of vehicles (from electric to heavy
duty vehicles). Users are able to perform common
service procedures, maintenance tests, and special
tests to find deficiencies with vehicle systems or
components.
The handset will display DTCs from OBDI or OBDII
systems. Real-time sensor data can be viewed in data
stream mode. The user can also obtain diagnostic
information regarding repairs. MD-200
2. Select a language.
1
2
ss02665
You’ve got the right tool! You’ve got the right tool!
Setup Wi-Fi
Register my Device Now Quick Setup End User License Agreement Register my Device Now
Add Wi-Fi Network
Software Product License Agreement
Register my Device Later 1) Read & agree to the EULA. Register my Device Later This is needed for networks that do not broadcast their SSID
Copyright (c) 2014-2017, Bosch Automotive
Service Solutions Inc. All Rights Reserved
Demo Mode
Demo Mode 2) Setup Wi-Fi.
SOFTWARE PRODUCT LICENSE AGREEMENT
3) Activate your warranty.
IMPORTANT: Do not continue until you have
read this Software Product License Agreement
(”Agreement”).
I Agree
Wi-Fi OFF Next: Your Name
3. Select the correct Time Zone. 5. Select a network and select Next
ss02825 ss01721
You’ve got the right tool! You’ve got the right tool!
Set Time Zone Setup Wi-Fi
Register my Device Now Register my Device Now
Shop
Register my Device Later Secured with WPA2
Register my Device Later
Office
GMT-05:00 Eastern Standard Time Demo Mode
Demo Mode Secured with WPA
Wi-Fi screen will be displayed. Follow the 9. Enter contact information. Follow the prompts
prompts on the screen. on the screen.
ss01722 ss01726
Select Wi-Fi
You’ve got the right tool!
On
Register my Device Now Activate Warranty
Shop
Connected
Register my Device Later cityshop@gmail.com
Office
Saved 3135551212
Demo Mode
1234 Main St
Address 2 (optional)
Detroit MI 48123
United States
Confirm Info
Back Next
7. If an internet connection could not be 10. Confirm information. Follow the prompts on
established, follow the prompts on the the screen and activate warranty.
screen and try again. ss01727
Office Garage
Demo Mode Ford
Secured with WPA
Internet Sync Required 10/10/2013
Add WiFi Network
Could not establish connection. please ensure connection to
InternetThis
is stable and try for
is needed again!
networks that do not broadcast their SSID 2695551212
OK
123 Main St
Detroit, MI 48481
USA
Activate Now
Privacy Policy Warranty FAQs
Smith
Demo Mode
ss02663 ss01823
You’ve got the right tool! You’ve got the right tool!
Printer Setup Register my Device Now Start a 30 Day Use End User License Agreement
Software Product License
Register my Device Later 1) Read & agree to the EULA. Agreement
Printer setup help
Copyright (c) 2014-2017, Bosch Automotive
Demo Mode Service Solutions Inc. All Rights Reserved
2) Setup Wi-Fi.
Demo
9:40
3
1
MD-200
MD-200
1. OBDII/DLC Cable
1 2. DLC
3 3. Scan Tool
• Software information
• Software update
• Printer Setup
Select Vehicle OBDII Saved Diagnostic Data Browser
• Subscriptions
• User Detail
Heavy Duty Settings
• Language
MD-200
• Direct-Hit
• Service
• Report Options
ss02852
1. Press and release the power button.
9:40
ss02856
9:40
Power off
Select Vehicle OBDII Saved Diagnostic Data Browser
MRST will shut down.
ss02670 ss02672
Settings Settings
Menu Menu
Contact Us Contact Us
Language Language
ss02671 Settings
Menu
Settings
Menu
Subscriptions
Serial Number D1HGOW1415005484ET
User Details
User Details Release Version: 3.0.0.11 Release Notes
Contact Us
Contact Us View Open Source Software Details View License
Language
Language
Subscription
Software Update
The tool must be registered to see this tab.
From the Settings screen select Software Update.
1. From the Settings screen select Subscription.
• Manually check for updates.
• Automatic download. • Heavy duty vehicle function is locked and must
NOTE: Active internet connection is required for this function. be unlocked.
• Need to obtain subscription code.
If an update is available follow the prompts on the
• After one year, the user will be required to
screen to update the handset.
renew the subscriptions to receive product
Downloading the software will occur in the
updates.
background and varies with Wi-Fi connection speed
ss02674
and quality. Installing the software can take up to
Settings
45 minutes. Please be sure to have your handset Menu
fully charged and allow sufficient time for the Application Settings Heavy Duty
Software Update
Printer Setup
Subscriptions
User Details
Language
Settings
ss02675 Menu
Settings
Menu Application Settings
Enter Subscription Code Owner’s First Name John Doe
q w e r t y u i o p
q w e r t y u i o p a s d f g h j k l Next
! ?
a s d f g h j k l z x c v b n m , .
@ “ _
! ?
z x c v b n m , . ?123 / ‘ - :-)
@ “ _
?123 / ‘ - :-)
Note: The information saved in User Details will also update registra-
tion information.
3. Enter Subscription Code and select OK.
Language
ss02676
Settings
Menu
1. From the Settings screen select Language
Application Settings
2. Follow the prompts on the screen
Heavy Duty
Software Information
All Coverage Subscription: Expires 5/21/2017
3. English
Software Update
4. Spanish
Printer Setup
5. French
Subscriptions
User Details
ss02679
Subscription Successfully Activated
Language
Subscriptions
~
English Espanol
Contact Us
¸
1. From the Settings screen select User Details. Language
Francais
ss02677 Direct-Hit®
Settings Service
Menu
Report Options
Application Settings Owner’s First Name John Doe
Contact Us Save
Language
9:40
2008 Ford
FORD F-150
XLT
5.4, FLEX, -, Naturally Aspirated, SOHC
automatically identify the vehicle or enter the 2008 Ford F-150 King Ranch 5.4L
VIN.
DTC DTC
entered.
AutoID
Diagnostic information Automated System Test Maintenance Tests Enhanced OBDII
9:40
Select
MAIN MENU - Tap BelowVehicle
To Begin Your Diagnostic Experience
AutoID
Recent Vehicles
SEARCH BY VIN
Heavy Duty Settings
Cancel
2. Select AutoID.
3. Once selected the handset will begin
©Mitchell International, Inc. 581624 | REV. B | 06.2017 | APDMD032018
User Manual | Mitchell Diagnostics | Scan Tool | 15 | en
the following:
ss02826 BUICK CADILLAC CHEVROLET CHRYSLER
9:40
No VIN
Selected
2015 Cancel
TLX
ss02690
9:40
Select
MAIN MENU - Tap BelowVehicle
To Begin Your Diagnostic Experience
2015 Acura No VIN
Selected Cancel
Choose vehicle selection method:
Make sure the key is ON and Engine is OFF
AutoID
SEARCH BY VIN
Heavy Duty Settings ss02714
Cancel YEAR MAKE MODEL SUBMODEL ENGINE
Base SH-AWD
ss02711
YEAR MAKE MODEL SUBMODEL ENGINE
ss02715 ss02691
YEAR MAKE MODEL SUBMODEL ENGINE
9:40
3.5, GAS, J35Y4, 3.5, GAS, J35Y5,
Naturally Aspirated, Naturally Aspirated,
SOHC SOHC Select
MAIN MENU - Tap BelowVehicle
To Begin Your Diagnostic Experience
VIN- VIN-
Choose vehicle selection method:
Make sure the key is ON and Engine is OFF
AutoID
Recent Vehicles
Cancel
8. At this point vehicle entry will disappear and • Set as current vehicle.
the user will be able to begin using diagnostic • Delete from recents.
functions on the vehicle. 4. Or just tap on the recent vehicle tile.
Recent
ss02826 ss02837
9:40 4:09
DTC DTC
CHECK CHECK
Select Vehicle OBDII Saved Diagnostic Data Browser Read DTCs Read DTCs
All Systems Select Systems Data Stream Special Tests
1. Select Vehicle.
5. At this point vehicle entry will disappear and
the user will be able to begin using diagnostic
functions on the vehicle.
ss02826
2008 Ford
9:40
FORD F-150
King Ranch
MAIN MENU - Tap Below To Begin Your Diagnostic Experience 5.4, FLEX, -, Naturally Aspirated, SOHC
2008 Ford
Today is Thu, 04 Jan 2018. 4. Select the desired vehicle from the list.
ss02835
1. Select Vehicle.
4:09
ss02692
DTC DTC
CHECK CHECK
9:40
Read DTCs Read DTCs
All Systems Select Systems Data Stream Special Tests
Select
MAIN MENU - Tap BelowVehicle
To Begin Your Diagnostic Experience
AutoID
Diagnostic information Automated System Test Maintenance Tests Enhanced OBDII
SEARCH BY VIN
Heavy Duty Settings 5. At this point vehicle entry will disappear and
Cancel the user will be able to begin using diagnostic
functions on the vehicle.
•
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
If the system is not ready, a drive cycle may need to Generic OBDII
Menu
ss02718
DTCs MODES 3, 4, 7, A
TAP ‘DATA STREAM MODE 1’ TO REOPEN
Generic OBDII O2 SENSORS MODE 5
Share Menu
NON-CONTINUOUS TESTS
MODE 6
READINESS MODE 1
Readiness (Mode 1)
SPECIAL TESTS MODE 8
DATA STREAM MODE 1
Monitor Description Status VEHICLE INFO MODE 9
FREEZE FRAME MODE 2
A/C System Refrigerant Monitor Not Supported
DTCs MODES 3, 4, 7, A
EGR System Monitor Ready
1. Select Data Stream Mode 1 from the Generic
O2 SENSORS MODE 5
Catalyst Monitor Ready
OBDII screen.
NON-CONTINUOUS TESTS
MODE 6 Heated Catalyst Monitor Ready
ss02420
Data Stream Button Definitions
Scroll Options
Recording:
Please select how you would like to scroll between pages. This setting can also be changed from Settings tab
1 of 2
ss02721
DTCs MODES 3, 4, 7, A
TAP ‘DTCs MODES 3, 4, 7, A’ TO REOPEN
Generic OBDII O2 SENSORS MODE 5
Share Menu
NON-CONTINUOUS TESTS
MODE 6
READINESS MODE 1
Mode 2 Freeze Frames
SPECIAL TESTS MODE 8
DATA STREAM MODE 1
DTCs MODES 3, 4, 7, A
6.35 inH2O 16003 miles 13722 miles 1. Select DTCs Modes from the Generic OBDII screen.
O2 SENSORS MODE 5
ss02723
NON-CONTINUOUS TESTS Catalyst Temperature Catalyst Temperature Catalyst Temperature
MODE 6 Diagnostic Trouble Codes for Global OBDII
Bank 1 Sensor 1 Bank 1 Sensor 2 Bank 2 Sensor 1 Clear Read Share Save Menu
Freeze frame records each sensor’s current B0002 Driver Frontal Stage 2
Deployment Control (Subfault)
information at the time a DTC sets. This feature
B0003 Driver Frontal Stage 3
could be used when diagnosing an intermittent Deployment Control (Subfault)
condition that requires certain conditions are met OBDII PENDING CODES
fail test. Some examples are certain EVAP tests, NON-CONTINUOUS TESTS
MODE 6
• Minimum value, maximum value, and current DPF TESTS Search All Special Tests
Each vehicle manufacturer assigns a code number Evaporative System Leak Check
the user to the special test screen where the test Generic OBDII
Menu
NON-CONTINUOUS TESTS
MODE 6
Overview
A
1. Select Saved Diagnostic Data from the Main Catalyst Temperature Bank 1 Sensor 2 77 °F Catalyst Temperature Bank 2 Sensor 1 108 °F
Menu Screen. Catalyst Temperature Bank 2 Sensor 2 108 °F Ambient Air Temperature Degrees 154 °F
Fuel Rail Pressure Gauge 2.7 psi Fuel Rail Pressure Gauge 2.5 psi
B0001 OBDII CURRENT CODES Driver Frontal Stage 1 Deployment Control (Subfault)
is no data available.
B0002 OBDII CURRENT CODES Driver Frontal Stage 2 Deployment Control (Subfault)
Share DTCs Button
B0003 OBDII CURRENT CODES Driver Frontal Stage 3 Deployment Control (Subfault)
B0001 OBDII CURRENT CODES Driver Frontal Stage 1 Deployment Control (Subfault)
Tapping the Share button opens the
B0002 OBDII CURRENT CODES Driver Frontal Stage 2 Deployment Control (Subfault) app and initiates options. Depending on
B0003 OBDII CURRENT CODES Driver Frontal Stage 3 Deployment Control (Subfault) what’s available at the time. Share a list
containing all the DTCs set by email or
4. View the report. When finished tap the back Bluetooth or USB.
button.
ss02732
Saved Diagnostic Data Button Definitions 10:38
Menu Button
file:///data/info/f Identifix Report Fast Touch Webs
file:///data/info/fasttouch/tech-communities.html 3
Overview
file:///data/info/f Identifix Report Fast Touch Webs
file:///data/info/fasttouch/index.html 3
An internet browser window is available for direct Fast Touch Websites Repair Information
internet access.
REPAIR INFORMATION
IDENTIFIFIND AND FIX FASTER MOTOLOGIC
ss02829
OEM
You
Today is Thu, 04 Jan 2018. file:///data/info/f Identifix Report Fast Touch Webs
file:///data/info/fasttouch/oem.html 3
You
See Android Settings for more information on setting up 4. Select OEM brings up the manufactures technical
and connecting to a wireless network. web page.
ss02830
MID - Message Identification
The MID Identifies the Component
9:40
Note: You need to have a Heavy Duty subscription in order for Heavy
PID 177 = Transmission Oil Temperature (Degrees)
Duty to be selectable.
OBDII Saved Diagnostic Data Browser SID 163 = Transmission Range (HI/LO)
Note: MID related SID’s start with Number 1 and sequentially in-
crease. Common SID’s start at Number 255 and sequentially in-
crease.
Heavy Duty 3825-30 Settings OBD-II Cable 3825-35
Connect to Scan Tool
The FMI describes the type of failure detected in the 2004 Volkswagen Passat GLS2.8L
part identified by the SPN. The FMI, and either the
SPN combined to form a given diagnostic Fault code. DTC DTC
CHECK CHECK
Example: FMI 002 = Data erratic, Intermittent or Read DTCs Read DTCs
All Systems Select Systems Data Stream Special Tests
incorrect
FMI 005 = Current below normal or Open circuit
FMI 007 = Mechanical System Not Responding Diagnostic information Automated System Test Maintenance Tests Enhanced OBDII
FMI 011 = Failure Mode not Identifiable Today is Tue, 09 Jan 2018.
Normal Message 1. Select Read DTCs All Systems from the Screen.
ss02739
SA/SPN/FMI or
DTC Scan
3-639-02
Menu
ss02740 section
DTC Scan
Menu
• If a DTC has Code Criteria available there will
2004 Volkswagen Passat GLS 2.8L be an “*” next to the DTC. Once completed the
Reading DTCs from INSTRUMENTS (17) handset will display a list of all the DTCs found
18% on the vehicle and group them by controller.
If the handset was unable to communicate
ENGINE (01) 6 DTC(s) found
ENGINE (01)
Selecting Take Screen Capture will save a
00001 (P0001) Fuel Delivery Control: Open Circuit Read Codes copy of the current open screen.
00002 (P0002) Fuel Delivery Control: Outside Specified Range Read Codes
00003 (P0003) Fuel Delivery Control: Signal Too Large Read Codes
4:09
Ford/Lincoln/Mercury
Self Diagnostics button displays a pop up
2007 Jeep Wrangler Unlimited X 3.8L
menu allowing the user to choose
DTC DTC between specific special tests.
GM/GMC
CHECK CHECK
Continue
Some controllers will go to sleep after
a period of inactivity and prevent
clearing DTCs. This key cycle may be
2. Select the desired vehicle controller then select needed when attempting to
continue. communicate with other controllers
after a period of time on a different
controller.
ss02744
Refresh DTCs Button
Diagnostic Trouble Codes
Tapping the Refresh button initiates a
fresh scan of DTCs from the vehicle.
Clear Read Share Save Menu
Active
B1000 Air Conditioning Switch
Share DTCs Button
DTC Info
Request Input Circuit/
Performance
Tapping the Share button opens the
B1001 Air/Conditioning Switch app and initiates options. Depending on
DTC Info
Request Input Circuit Low
what’s available at the time. Share a list
B1002 Air Conditioning Switch
Request Input Circuit High DTC Info
containing all the DTCs set by email or
Bluetooth or USB.
Pending
B1000 Air Conditioning Switch
Menu Button
DTC Info
Request Input Circuit/
Tapping the Menu button displays a pop-
up link that takes the user to help content
3. DTCs will be read from the selected vehicle related to reading DTCs.
controller. Note: an active internet connection will be
required.
• Select a listed DTC for Related Diagnostic
Information See Diagnostic Information View Help
Selecting View Help will open an online
section.
user manual.
• If a DTC has Code Criteria available there will
be an “*” next to the DTC. Take Screen Capture
Selecting Take Screen Capture will save a
copy of the current open screen.
Ford/Lincoln/Mercury ss02746
When connected to a Ford/Lincoln/Mercury vehicle 2012 Ford Mustang Shelby GT500 5.4L PCM
Read DTCs
ss02840 KOEO
KOER
4:09
Reset KAM
DTC DTC
CHECK CHECK
Read DTCs
All Systems
Read DTCs
Select Systems Data Stream Special Tests 3. Tapping an option in the menu takes the user to
that test. Follow the prompts on the screen.
Current Codes
1. Select Read DTCs from the screen. B10A2-00 Crash Input
DTC Info
Please select one or more controllers and tap ‘Continue’ to start DTC scan.
Manual DTCs
2. Select the desired vehicle controller then select
continue. Certain vehicles do not support standard DTC
protocol and will require a manual process for
retrieving and clearing codes.
ss02748
1) Take out diagnosis connector from side of driver’s seat heater unit.
5) ABS warning light is set in the diagnostic mode and blinks to identify trouble codes.
6) After the start code (11) is shown, the diagnostic trouble codes (DTC) will be shown in order
of the last information first. These repeat for a maximum of 3 minutes.
7) NOTE: When there are no diagnostic trouble codes (DTCs) in memory, only the start code (11)
ss02749
Code Criteria
Diagnostic Trouble Codes
Codes will be read from the selected controller and
displayed on the screen.
Clear Read Share Save Library Menu
7) NOTE: When there are no diagnostic trouble codes (DTCs) in memory, only the start code (11)
2. Select Library button. P0102 Mass Air Flow Sensor Circuit
Low Frequency DTC Status DTC Info
24
7) NOTE: When there are no diagnostic trouble codes (DTCs) in memory, only the start code (11)
CODE ASSIST Frequently Reported Battery Cable(s) Replaced
Fixes Google
3. Follow the prompts on the screen. PCM Pin
Frequently Reported Ignition Key(s) Replaced
Fixes
ss02751 LOCATION
Frequently Reported Starter Replaced
Fixes
SCAN TEST
System Wiring
Frequently Reported Vehicle Theft Performed Diagrams
Fixes Detection (VTD)
Diagnostic Trouble Codes Diagram
Clear Read Share Save Library Menu
2) Turn ignition switch Off. DTC Info allows the technician to find details related
3) Connect diagnosis connector terminal 6 to diagnosis terminal. to a given DTC.
4) Turn ignition switch On.
Description
5) ABS warning light is set in the diagnostic mode and blinks to identify trouble codes.
6) After the start code (11) is shown, the diagnostic trouble codes (DTC) will be shown in order Displays the description associated with the selected
of the last information first. These repeat for a maximum of 3 minutes.
DTC.
7) NOTE: When there are no diagnostic trouble codes (DTCs) in memory, only the start code (11)
4. Select Clear DTCs button. Code Criteria
ss02752
Provides information regarding how the DTC is set.
Code Assist
Diagnostic Trouble Codes
Clear Read Share Save Library Menu
2002 Subaru Forester Base 2.5L ABS Provides information regarding the kind of action
Manual Codes Procedure
other technicians found successful when faced with
1) After calling up a diagnostic trouble code (DTC), disconnect diagnosts connector terminal 6
from diagnosis terminal. the same DTC.
2) Repeat 3 times within approx. 12 seconds; connecting and disconnecting terminal 6 and
diagnosis terminal for at least 10 seconds each time. PCM Pin
3) NOTE: After diagnostics is completed, make sure to clear memory. Make sure only start code
(11) is shown after memory is cleared. Provides detailed information related to the actual
pins on the PCM that are associated with the
selected DTC.
Location
5. Follow the prompts on the screen.
ENGINE (01)
Diagram
AUTO TRANSMISSION (02)
Continue
Presents reference waveform information to help
the technician understand and fix the problem.
TSB Reference 3. Select the desired vehicle controller then select
continue.
Provides the technician with TSBs associated with
the selected DTC. 4. Follow the prompts on the screen.
ss02756
Connector
Presents information related to the connector to
5
Data Stream
Playback Menu
The data stream function shows live sensor and Syatem Specific Data Select Customize
solenoid data streaming from the vehicle ECU • Accelerator Pedal Angle
• Combustion Failure Detection
• Air Conditioner Radiator Fan Request
• Combustion Failure Total
the vehicle at key on engine off or key on engine • Comm. With Strng.Column Swit. Module
• Commun.With Steering Wh.Angle Sensor
• Comm. With Suspension Control Unit
• Communic. With Engine management II
Basic Data Stream Procedure • Data groups may be selected at any time
within data stream.
ss02841
• Select the data group menu button from the
top of the screen.
4:09
CHECK CHECK
ss02757
Volkswagen/Audi Group
All Data Groups
Enter a Group Between: 0 and 255
( ) = 7 8 9
0 #
AIRBAG Left Front Bank 2 Cruise/Acceleration -63 % Short Term Fuel Trim Bank 1 -119 %
1 of 2
7. Select the desired vehicle controller then select BUFFERING DATA.. 200 / 200 frames
continue.
1. To view the data in the Enlarge view, press the
8. Follow the prompts on the screen.
Enlarge button.
ss02759
5
Data Stream
Playback Menu ss02762
2003 Cadillac CTS Luxury Sport 3.2L ENGINE
A
5
All Data Groups
All Data Groups Data Stream All Data Items Z
All Data Items Search all Data Streams 2003 Cadillac CTS Luxury Sport 3.2L ENGINE
Calculated Fuel Level Del Torque PWM Heated Oxygen
EVAP Data All Data Items Select Customize Converter
Temperature
Duty Sensor Heater
Bank 1 Sensor 1
• * Clutch Start Switch (If Equipped) • * Clutch Clutch Switch (If Equipped) 2178
• * PNP Switch (If Equipped) • A/C High Side Pressure 14.19 30 64.2
Engine Data 1 986 gal % %
• A/C High Side Pressure Sensor • A/C Off For Wide Open Throttle
• A/C Pressure Disable • A/C Relay °F
1.19 9.31 21.14 2 46 98 7.8 48.2 95.8
Engine Data 2 • A/C Relay Command • A/C Request 72
Low Avg High Low Avg High Low Avg High
• Acceleration Pedal Position At Idle • Accelerator Pedal Position Angle
• Accelerator Pedal Position Sensor 1 Voltage • Accelerator Pedal Position Sensor 2 Voltage Startup Engine Fuel Tank Pressure Generator F- Heated Oxygen
Engine Data 3 Coolant Terminal Signal Sensor Heater
Temperature Bank 1 Sensor 2
EVAP Data Select Customize
289 11.2
Fuel Trim Data 34 52.7
• Accelarator Pedal Position Angle • Battery Voltage -4 -0.5 % %
• Calculated BARO • Desired Idle Speed
°F inH2O
5 47 94 9.5 53.6 98.4
-49 -12.6
Low Avg High Low Avg High
1 of 3
group is found, then select it. Calculated Converter Temperature Startup Engine Coolant Temperature
A
5
Data Stream All Data Items Z
Left Front Bank 2 Cruise/Acceleration -63 % Short Term Fuel Trim Bank 1 -119 %
To see more graphs use your finger to swipe the
Short Term Fuel Trim Bank 2 28 % Engine Oil Life Left 7%
34 52.7
To view the data in the Full Screen Mode, -4 -0.5 % %
°F inH2O
1 of 3
BUFFERING DATA.. 100 / 200 frames
##
Calculated Converter Temperature Startup Engine Coolant Temperature
Digital
2145 286 To change to digital form, select the ##
1643 259 Digital button.
°F °F
-56 -49
Line Graph
To change to line graph, select the Line
Graph button.
BUFFERING DATA.. 200 / 200 frames
1 of 10
Bar Graph
To change to bar graph, select the Bar
Note: The left graph will be shown full size. Graph button.
ss02765 Change Color
To change the color of a graph, select the
Calculated Converter Temperature
Change Color button.
2224
Clear All Data
Select Clear Data to clear displayed data
347 stream. This function will reset the timeline
°F
frame counter and clear graphed data.
Take Screen Capture
-31 Selecting Take Screen Capture will save a
copy of the current open screen.
1 of 20
ss02770
Display Type Button Definitions
A
Sort
5
Selecting English/Standard Units will 2003 Cadillac CTS Luxury Sport 3.2L ENGINE
Fuel Level Heated Oxygen Engine Oil Life Left
switch from Metric Units to English/ Sensor Heater
Bank 1 Sensor 1
23.41
93.2
View Only Selected
78.2
-33
%
NOTE: Not all display types are available for all data items. gal
0.74
A
Z
%
Sort By Alpha
4.3
-48 -4 47
Low Avg High
Select Function
Fuel Tank Pressure Heated Oxygen Sort By Graph
Sensor Heater
Bank 1 Sensor 2
11.7
53.6
ss02767 -1.9 %
inH2O
0.8 42.2 92.2
-12.0
A Low Avg High
5
Data Stream All Data Items Z
Startup Engine
Coolant
Fuel Tank Pressure Generator F-
Terminal Signal
Heated Oxygen
Sensor Heater
NOTE: Sorting data items will reset the timeline frame counter, so
Temperature
289 11.2
Bank 1 Sensor 2
sort these items before recording data.
34 52.7
-4
°F
-0.5
inH2O
% %
Recording
5 47 94 9.5 53.6 98.4
-49 -12.6
Low Avg High Low Avg High
ss02771
1 of 3
BUFFERING DATA.. 100 / 200 frames
A
5
Data Stream All Data Items Z
1. Select the Custom button. 2003 Cadillac CTS Luxury Sport 3.2L ENGINE
Calculated Fuel Level Del Torque PWM Heated Oxygen
Converter Duty Sensor Heater
ss02768 Temperature Bank 1 Sensor 1
2178
14.19 30 64.2
A
5
986 gal % %
Sort
5
ss02769 °F
-24
gal
6.84
2 56 99 1.4 33.8 71.9
Low Avg High Low Avg High
gal %
-48 -4 44
3.65 4.3
Low Avg High
inH2O
0.8 43.9 90.8
-10.4
Low Avg High
1 of 1
BUFFERING DATA.. 107 / 200 frames
A
Overview
6
Data Stream All Data Items
RECORDINGS
Z
Menu
ENGINE
Calculated
Converter
Fuel Level
2003 Cadillac CTS Luxury Sport
Del Torque PWM
Duty
Heated Oxygen
Sensor Heater special tests are available.
Temperature Jan 10, 2018@ 2:02 PM Bank 1 Sensor 1
ENGINE
The special test function is a key component of the
1773
14.19 30 15.1
986 2007 Jeep Wrangler Unlimited X gal % %
BUFFERING DATA..
Jan 10, 2018@ 1:57 PM
100 / 200 frames
1 of 3 manual testing with electrical troubleshooting
equipment. It is also a quick and easy way to test
1. Select Playback to view previously recorded data vehicle controller operation which is difficult to test
streams. using traditional methods.
• Recordings are listed from newest to oldest. ss02842
• To view recordings, select the Recordings 2007 Jeep Wrangler Unlimited X 3.8L
14.06 12 39
%
56 4.5 29.2
%
62.3
1. Select Special Tests from the screen.
1141
Low Avg High Low Avg High Low Avg High
°F inH2O
20 45 74 45.1 68.0 89.7
131 -11.5
Low Avg High Low Avg High
2007 Jeep Wrangler Unlimited X3.8L
Recorded: 1 minutes ago 21 / 420 frames
ss02776 ss02779
SPECIAL TESTS
Capture Menu
Access VIN
DIESEL CONTROLS
Read VIN
DPF TESTS
Write VIN
EGR TESTS
Diesel Controls
ENGINE TESTS
Glow Plug
FAN TESTS
Increase Decrease Exit
DPF Tests
3. At the special test screen, select a special test group 6. To terminate a test at any time, use the
from the group selection menu, then select the emergency stop button. To exit special tests
desired special test within the desired test group. normally, select the exit or abort button.
ss02777 Note: Exit or abort will both stop the current special test and take
you back to the start of Special Tests.
SPECIAL TESTS
Menu
All features outside the special test are locked out
2007 Jeep Wrangler Unlimited X 3.8L ENGINE until the test is terminated to protect the vehicle
ALL TESTS
Engine Tests and the person running the special test. If a function
ACCESS VIN Idle Sped Setpoint
outside the special test is desired, terminate the test
DIESEL CONTROLS and proceed to the desired function. Special tests
DPF TESTS are not available for all vehicles and controllers. The
EGR TESTS air bag controller will rarely provide special tests,
ENGINE TESTS as actuating the air bag would cause damage to
FAN TESTS the steering wheel or cabin components. It would
also be necessary to replace air bag modules after
4. Only the tests meeting the search criteria are running the test and clean the interior. Special tests
displayed. Select the desired test to be executed. will be continuously updated as more are added;
Note: Some tests may require a registration like Tire Pressure Sensor in addition, tests which do not function may be
Test. removed during updates as well. There may be tests
listed that do not function on the selected vehicle.
ss02778 This is likely due to the fact that many vehicles have
SPECIAL TESTS
Capture Menu
different systems depending on sub-model types.
2007 Jeep Wrangler Unlimited X 3.8L ENGINE
C Codes
DTC DTC
(15)
P02 Codes
6,167 311 (10) P0037 P0038 P0051
Oxygen Sensor Bank 1 Sensor 2 O2 Sensor 1/2 Heater Circuit High O2 Sensor 2/1 Heater Circuit Low
P03 Codes Heater Circuit Low
(13)
Video Library Direct-Hit® Code-Assist Library
P04 Codes
(19)
P0052 P0057 P0058
2 94 P05 Codes O2 Sensor 2/1 Heater Circuit High Oxygen Sensor Bank 2 Sensor 2 Oxygen Sensor Bank 2 Sensor 2
Heater Circuit Low Heater Circuit High
(20)
• Each vehicle and controller will have its own 5. To return to previous menu screens, select the
set of indications. back arrows at the top of the screen.
• The indication is displayed on top of the Repair Trac ®
Diagnostic Information selection.
This function uses the AutoDetect Result Number
• When entering diagnostic information,
Indication feature described on the previous page.
the application will conduct a search in the
background for the selected vehicle/controller 1. Select Repair Trac® from the Diagnostic
combination to determine the number of Information screen to view previously reported
items it will contain. repairs for the selected vehicle/controller
NOTE: If diagnostic information is desired for a different controller or combination.
vehicle, return to the Screen and change the controller or vehicle
there, then re-select Diagnostic Information. Failure to follow this
could lead to display errors or communication errors.
NOTE: Not all assets within the Diagnostic Information menu will
utilize the AutoDetect Results Number indication feature.
https://scantool.service-solutions.com/VideoLibrary/VideoLibrary_ET.htm
ss02798 ss02800
2003 GMC Yukon XL 1500 SLT 5.3L PCM 2003 GMC Yulon XL 1500 SLT 5.3L PCM
A/C SYSTEM REFRIGERANT
MONITOR
1) Cold start engine coolant temperature < 50 degrees Celsius, with air PCM Pin
conditioning & rear defrost on, idle 2.5 minutes in drive. Before
CATALYST MONITOR procedding turn accessories off.
Pin Number Description
COMPREHENSIVE COMPONENT 2) Acceleration to 55 miles per hour, 1/2 throttle, air conditioning off.
MONITOR C1-1 Ground
EGR SYSTEM MONITOR 3) 3 minutes steady state cruise 55 & 60 miles per hour.
C1-2 12 Volt Reference
EVAP SYSTEM MONITOR 4) Deceleration to 20 miles per hour (clutch out) no brake.
C1-3 Fuel Injector 3 Control
FUEL SYSTEM MONITOR 5) Acceleration at 3/4 throttle to 55-60 miles per hour, then steady C1-4 Fuel Injector 2 Control
state cruise for 5 minutes.
FULL DRIVE CYCLE C1-7 5 Volt Reference
6) Deceleration no brake, end of cycle.
2. Scroll through the list until the desired monitor or 2. Scroll through the list and select the desired
drive cycle is found. sensor or component is listed.
3. Select the desired drive cycle and follow the ss02801
instructions.
Oil Light Reset PCM Pin
Menu
Connector Color:Blue
Description: Ground
ss02799
KOEO N/A N/A
N/A N/A
Oil Light Reset Procedures Displays TSBs associated with the vehicle/controller
1) Turn the ignition key to the RUN position. combination.
2) Fully push and release the accelerator pedal 3 times within 5 seconds.
1. Select TSB Reference from the Diagnostic
3) if the CHANGE OIL SOON light flashes, the system is resetting.
Information screen.
4) Turn the key to OFF.
ss02802
5) Start the vehicle.
TSB Reference
Menu
2. Select Oil Light Reset from the Diagnostic 2003 GMC Yulon XL 1500 SLT 5.3L PCM
3. Follow the prompts on the screen to turn off the 02-09-41-001 Computers & Controls - DTC’s Set When Replacing Modules
PCM Connector Pin Information 01-07-30-036C Automatic Transmission - Diagnostic Trouble Code P0756
Dianostic Tips
Displays a list of which connector and pin a 01-07-30-038B Automatic Transmission - 4L60-E / 4L65-E Malfunction Indicator
Lamp ON / Diagnostic Trouble Code P0757 / Slipping
component or sensor is received through on the PCM. 02-06-05-004A Emissions - Catalytic Converter Damage / Misfire Codes Set
1. Select PCM Pin Information from the Diagnostic 1. Scroll through the list until the desired TSB is
Information screen. found.
Trans Pan ID 0) Warning: brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands
Menu
thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes.
2003 GMC Yulon XL 1500 SLT 5.3L PCM
GLOSSARY IMAGE 0) Fill the brake master cylinder reservoir with brake fluid.
0) Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical
400
Used to find where specific components are located. 1. Select Tune Up Specs from the Diagnostic
Information screen.
1. Select Location Info from the Diagnostic
ss02806
Information screen.
ss02804
Tune Up Specs
Menu
Timing
DLC LOCATION
Spark Plug
COMPONENT LOCATION
Firing Order
Battery
Information screen.
ss02807
TPMS Quick Information
Menu
Key Programming
Menu
DESCRIPTION
Description
2004 Ford F-150 XL 5.4L ABS (4WABS) RESET PROCEDURES...
System Description: When the vehicle speed exceeds 28 mph (45 km/h),
Battery Replacement
Battery Replacement RESET TRIGGER
the Tire Pressure Monitor System (TPMS) Control Unit monitors the
pressure in all four tires and the system itself. System Operation: The
Immobilizer See Image TPMS has two LED indicators that are part of the gauge module; a low-
TORQUE SPECS
pressure indicator and a system indicator. When the TPMS Control Unit
detects low pressure in a tire (or a problem in the system) it turns on the
Remote Alarm/Central
Locking appropriate indicator(s). If low tirw pressure is detected, the low pressure
TPMS SENSOR PART indicator comes on. If a problem in the system is detected, the TPMS
NUMBER
indicator comes on. If low tire pressure and a problem in the system are
detected, only the TPMS indicator comes on. With the system functioning
properly, the low pressure indicator should come on when the ignition is
turned ON. It should then go off 2 seconds later. If this is not the case, there
Is a problem with the system. If the system detects low pressure in any tire,
3. Follow procedures for updating vehicle systems The Automated System Test (AST) will scan all
after battery has been disconnected. available controllers on the selected vehicle for
Modes 1-7.
TMPS Quick Info
Depending on the vehicle, the handset may ask
Describes the operating procedures for the Tire qualifying questions concerning particular controller
Pressure Monitor System (TPMS) for the selected
Production Option (RPO) code list sticker on the 2007 Jeep Wrangler Unlimited X 3.8L
vehicle, and then find the corresponding code for Getting GLOBAL OBDII Mode 2 Freeze Frames
trunk, glove box, or doorjamb. These questions may AUTO SWAY BAR 9 DTC(s) found
4:09
Readiness Monitor Tests (Mode 1) 11 DTC(s) found
DTC
CHECK
DTC
CHECK
3. Scan progress will be indicated by the progress
Read DTCs Read DTCs
percentage bar on the screen.
All Systems Select Systems Data Stream Special Tests
ss02782
Diagnostic information Automated System Test Maintenance Tests Enhanced OBDII
1. Select Automated System Test from the Screen. Report ready for viewing.
View
100% Report
2007 Jeep Wrangler Unlimited Rubicon 3.8L Non Continuously Monitored Tests (Mode 6) 20 item(s) found
3%
ENGINE - 1FTPW14V28FC54321
Freeze Frame Data (Mode 2) 1 item(s) found
Close
Oxygen Sensor Tests (Mode 5) 80 item(s) found
NOTE: Available items will vary from vehicle to vehicle. Data Stream Snapshot
Summary Report ss02786
ss02784
Global OBDII
DTCs DATA STREAM SNAPSHOT
VIN:1FTPW14V28FC54321 CONTROLLER: ENGINE
108 20 19 MODE 5
-23.84 inH2O 18657 miles 12601 miles
FREEZE FRAME
MODE 5 Oxygen Sensor Tests Non Continuously Monitored Tests (Mode 6) MODE 6
(Mode 5) Catalyst Temperature Bank 1 Catalyst Temperature Bank 1 Catalyst Temperature Bank 2
MODE 6
80 6 Passed 14 Failed Data stream Snapshot, is a current view of the
AST summary reports items found on the vehicle, onboard vehicle sensors.
such as: Mode 1 (Readiness Monitor)
• Controllers found on vehicle. ss02787
• DTCs.
• Data Stream Snap Shot.
Automated System Test Report
• Mode 1 (Readiness Monitor). 2007 Jeep Wrangler Unlimited X 3.8L
Clear Refresh Share Save Menu
NOTE: Available selections will vary from vehicle to vehicle. A/C System Refrigerant Monitor Ready
MODE 1
EGR System Monitor Ready
DTCs FREEZE FRAME
Catalyst Monitor Ready
ss02785 MODE 5
Heated Catalyst Monitor Ready
MODE 6
Misfire Monitor Ready
SUMMARY
the continuous monitors available on the selected
Diagnostic Trouble Codes
vehicle. There are three states: ready, not ready, and
DTCs
TRANSMISSION not supported. If the monitor is not ready, a drive
DATA STREAM SNAPSHOT
P0078 Exhaust Valve Control Circuit (Bank 1) Active cycle must be completed prior to running this test.
MODE 1
P0560 Battery System Voltage Active For more information regarding drive cycles, refer to
FREEZE FRAME P0613 Internal Transmission Processor Active
diagnostic functions Mode 1 readiness.
MODE 5 P0078 Exhaust Valve Control Circuit (Bank 1) Pending
ss02788
DTCs recorded are displayed. When selecting DTCs,
diagnostic information is also available (same
Automated System Test Report
information as the Read DTCs screen). 2007 Jeep Wrangler Unlimited X 3.8L
Clear Refresh Share Save Menu
SUMMARY
Mode 2 Freeze Frames
DTCs
MODE 1
FREEZE FRAME
MODE 5
MODE 6
1. Select a frame.
ss02789 ss02791
2007 Jeep Wrangler Unlimited X 3.8L 2007 Jeep Wrangler Unlimited X 3.8L
SUMMARY
Mode 2 Freeze Frames SUMMARY
Non-Continuously Monitored Tests
DTCs DTCs (Mode 6)
DATA STREAM SNAPSHOT Evaporative Emissions Distance MIL Active Distance Since DTC Clear DATA STREAM SNAPSHOT
System Vapor Pressure ECU: ENGINE
Mode 2 displays recorded data in the form of a DS Non-Continuous Monitor Tests (Mode 6) are pass/
snapshot by the vehicle’s computer when specific fail tests, including certain EVAP tests, catalyst, and
DTC are set and the MIL is illuminated. EGR. The following information is reported:
Mode 5 (Oxygen sensor tests) • ECU.
Mode 5 views O2 sensor monitor test results. • TID (test identification) indicates the system
monitor.
ss02790
• CID (component identification) indicates the
component tested and its test value.
Automated System Test Report
Clear Refresh Share Save Menu
• Minimum value, maximum value, and current
2007 Jeep Wrangler Unlimited X 3.8L value for each non-continuous monitor.
SUMMARY
Oxygen Sensor Tests (Mode 5) • Pass or fail test result.
DTCs
Each vehicle manufacturer assigns a code number
Description Min Value Max Units
DATA STREAM SNAPSHOT
Bank 1 Sensor 1
to their system monitors and components. Refer
MODE 1
Maximum Sensor Voltage For Test Cycle 0.000 0.003 1.275 V
to the vehicle manufacturers Mode 6 code chart to
FREEZE FRAME
Lean To Rich Sensor Threshold Voltage 0.000 0.003 1.275 V
determine the failure indicated by the TID and CID. If
MODE 5
High Sensor Voltage For Switch Time 0.000 0.003 1.275 V
this chart is not readily available, run an automated
MODE 6
Calculation
system test (AST) from the DTC screen and select
Minimum Sensor Voltage For Test Cycle 0.000 0.003 1.275 V
Mode 6. See Read DTCs section for more information
Mode 5 views O2 sensor monitor test results. Mode regarding steps to complete this action. This may
5 displays the average of the O2 sensor monitor provide a more detailed description of the Mode 6
test results measured over a period of time. The test information.
parameters of this measurement vary between
manufacturers. It may be necessary to run the Automated System Test (AST) Button
vehicle for a period of time to allow the O2 sensors Definitions
to fully warm up and begin operating. Refresh DTCs Button
Tapping the Refresh button initiates a
Note: Mode 5 is not supported on all vehicles.
fresh scan of DTCs from the vehicle.
Mode 6 (Non-continuous monitor tests)
Share DTCs Button
Mode 6 views onboard monitoring test results for Tapping the Share button opens the
noncontinuous monitor systems. app and initiates options. Depending on
what’s available at the time. Share a list
containing all the DTCs set by email or
Bluetooth or USB.
ss02810
Automated System Test (AST) Button
Definitions
Menu Button
Tapping the Menu button displays a pop-
up link that takes the user to help content
Select a Maintenance Test Catagory
related to reading DTCs.
Battery/Charging
Note: an active internet connection will be
required. Brake Service
Overview ss02811
ss02844
ss02812
DTC DTC
SPECIAL TESTS
CHECK CHECK Capture Menu
Continue Abort
ss02813 ss02850
SPECIAL TESTS
Capture Menu
DTC DTC
CHECK CHECK
Enhanced OBDII
4:09
Overview
Enhanced OBDII provides all of the same functions
and features as Generic OBDII with the addition of Saved Diagnostic Data Browser Settings
Browser
Overview
An internet browser window is available for direct
internet access.
ss02849
4:09
Settings
Overview
Select the settings icon to view and change handset
default settings.
ss02851
4:09
Customer Support
Order Information
Replacement and optional parts can be ordered
from www.otcparts.com or an OTC authorized tool
supplier.
Repair Service
Please contact Technical Support for troubleshooting
and service options before sending any unit in for
repair. To send a unit in for repair, go to https://
repairtrack.bosch-automotive.com and follow the
online instructions.
This website will also have the latest service policies
and service center locations. If you do not have
internet access, please call (800) 344-4013.