Procedure NO.36
1 Application
This procedure applies to KIT NO.191 of Automated Blood Coagulation Analyzer CA-600 series and Handheld
Barcode Reader( 1900GSR-1)
2 Preparation
KIT NO.191 includes the following parts,
No_ | Part No, Description Quantity
1 | BF705470 CBL-020-300-C00-Sx1 1
2 | aaei0747 PROCEDURE NO.38(Thie document) 1
I
addition to this kit, use the following product.
No _| Part No. Description Quantity
1 | ere04s71 1900GSR-1 HANDHELD BARCODE READER 1
3 Installation
3.1 _ Installation procedure for the connecting cable (CBL-020-300-C00-SXt)
“CAUTION ]
Turn the power off before installing this kit.
1) Remove the cap of Hand-held Barcode Reader Connector on the COVER NO.1966,
Cap of Hand-held Bercode
Reader Connector
Part No. AQ610747 12) Connect the connecting cable [CBL-020-300-C00-SX (Included in this Kit))to the Hand-held
Barcode Reader/1900GSR-1 and the Hand-held Barcode Reader connector of Main Unit.
3.2 Initialization of the Hand-held Barcode Reader
1) Turn the power of the Main Unit on.
wy A “beep” will sound indicating that the power is supplied to the
Note
barcode reader and the barcode reader is ready to use.
2) Press ‘Special Menu’ — ‘Settings’ — ‘I/O Settings’ — ‘Barcode Scanner’
3) Hand-held BCR is set to ‘Connected’
eady
Barcode Scanner
Saupe BCR Not Connected
Kind! TF,
Kind2 NWHZ,
Kinds CODERS
Kindé ai)
Hand-held BCR
Check Digit
eee = ae
4) Press ‘Return’ — ‘Fix’
Part No, AQ6107475) Scan the following barcode with the connected Hand-held Barcode Reader to initialize the setting
to use it in CA~600.
6) Confirm that the barcode is scanned and a “Beep” sound is heard.
3.3 Confirming if the Hand-held Barcode Reader is connected
1) Press ‘Standard Curve’ — ‘Lot No. Entry’ — “Ref”
2) Confirm the “HB” character and Hand-held Barcode Reader icon is displayed,on the upper part of
the screen
suinon Btn eacky vei)
Standard curve r
fied oonidaed talend mle tls tcl
eclans ooed eeL eBd eDaes ne
Sid ald led sad sold Enter
etd as eZ ABS CHC Dut
Part No. AQ610747 33) Scan the following barcode with the connected Hand-held Barcode Reader to check the settings
have been done correctly.
4) Confirm that the barcode is scanned and a “Beep” sound is heard.
5) Confirm that the scanned information is the same as the information displayed on the following
screen.
dy HE
place Rack? YES! ¥
Standard curve PTT
Lot No! 123456
Expiration date: 01/01/2041
The above settings ere read.
Reaisten eCaneel
6) Press ‘Cancel’ — ‘Quit’ — ‘Return’ — ‘Cancel’ — ‘Main Menu’ to return to the
stand-by menu,
End of document:
Part No. AQ610747 4