1. Hydraulic oil level Boom and bucket in transport position. 1 With cold oil, oil level should be between the sight glasses (at operation temperature oil level should be seen in the upper sight glass). 2. Brake hydraulic oil level With cold oil and brakes engaged, oil 2 level should be between the sight glasses.
10. Check hand portable fire
extinguisher (opt.)
11. Check that the emergency stop
buttons at the rear end of the machine (optional) are not in the pushed in position. If this is the case, deactivate the emergency stop button by pulling the button out.
12. Turn the main switch to the “ON”
position.
Do not switch the main switch on if danger/service tag attached.