Professional Documents
Culture Documents
Name:______________________________________________ Year/Section:______________
Registered jack 1. This is a standard physical Network Interface used for connecting telecommunications
equipment commonly, a computer networking
equipment.
Crimping tool (wire stripper) 2. is used to join the RJ-45 and RJ-11 connectors to the both ends of UTP
Cable.
LAN Tester or A cable tester 3. A tester is a device that is used to test the strength and connectivity of
a particular type of cable or other wired assemblies.
Computers with Network Interface Card (NIC),4. Referred to as an Ethernet card and networ
adapter. It is an expansion card that enables a computer to connect to another computer
Name:______________________________________________ Year/Section:______________
1995 1. The TIA/EIA 568-A standard which was ratified in what year?
2002 2. In what year the TIA/EIA 568-B standard has been updated?
RJ-45 3. Both standards define the T-568A and T-568B pin-outs for using Unshielded Twisted Pair cable
and ________ connectors for Ethernet connectivity.
T-568B 4. A good way of remembering how to wire a Crossover Ethernet cable is to wire one end using
the T-568A standard and the other end using the _________standard.
Crossover Ethernet cable 5. Another way of remembering the color coding is to simply switch the
Green set of wires in place with the Orange set of wires.
Formative Exam 1.3
Name:______________________________________________ Year/Section:______________
Subject:_____________________________________________ Date Accomplished:________
Enumerate at least seven (7) the types of tools, material, and equipment used in creating cross over and
straight through cables.
1. Crimping Tool
2. Wire Stripper
3. LAN Tester
A. Directions: Write TRUE if the statement is correct and FALSE if it is wrong. Write your
answers on the space provided for. (2Points each).
FALSE 1. In a UTP Cables, there are 9 wires inside of it as the total strands.
FALSE 2. An ordinary flier is used to strip or pilling the cover of an UTP Cable.
FALSE 3. A networking concept is just like not sharing of file in computer systems.
TRUE 4. All tools should be kept in good condition with regular maintenance.
B. Directions: Label the tools and materials and write their uses and functions on the boxes
provided for.
4. Computers with Network Interface
RJ means Registered Jack.- Card (NIC),
1. This is a standard physical -The NIC is also referred to
Network Interface used for as an
Ethernet card and network
connecting telecommunications
adapter. It is an expansion card
equipment commonly, a computer that enables a computer to
networking connect to another computer
equipment.
Crimping tool (wire 5. UTP Cable -The
stripper)- is used to cheapest cable use in
2. join the RJ-45 and RJ- networking is the UTP
11 connectors to the (Unshielded Twisted
both ends of UTP Pair) cable
Cable
C. Multiple Choices. Directions: Write your answers on the space provided before the
number. Use CAPITAL letter for your answer. (5 pts)
A 1. The ends of a UTP cable are shown below. Which cable configuration is shown?
A 2. The ends of a UTP cable are shown in the exhibit. Which cable configuration is shown?
A. crossover B. rollover C.
reversed-pair D. straight-through.
Even 4. Make sure that the cut is _______ and small enough for the RJ45.
A. Even B. Scattered C. Fix D. Odd
RJ45 5. Put all wires inside the________. For straight through, used this configuration for both end
colors must be the same.
D. Direction: Direction: Answer the following activity in the space provided for
networking.
Enumeration.Enumerate the following steps on how to configure computer name and workgroup
name. (5 pts)
A. First step in making network cable.: Cut the cable insulator to show all the eight wires
B. Second step in making network cable? Crimp the RJ45 using Crimpping tool
D. Fifth step in making network cable? Position all wires. Make sure that all are in
proper pin assignment
E. Eight step in making network cable? Put all wires inside the RJ45. For
straight through, used this configuration for both end colors must be the same.
.LESSON 2
Name:______________________________________________ Year/Section:______________
Subject:____________________________________________ Date Accomplished:________
Direction: Multiple choices. Select the best answer of your choivces. (2 Points Each)
A 2. Servers are able to be accessed remotely from different locations and types of systems.
A 4. What type of cable would be used to make the connection between the computer to switch
and going to another computer?
C 5. . What type of cable would be used to make the connection between the one or more
computer to a switch?
Name:______________________________________________ Year/Section:______________
Enumeration.Enumerate the following steps on how to configure computer name and workgroup
name. (5 pts)
A. First step: Click on Start, Right click Computer and select Properties.
C. Third step: Type in the Computer Name and Workgroup Name. Computer
Name=YOURNAME-PC1 Workgroup Name=CSSLAB
E. Fifth step : Do the same for other PC just change the name to YOURNAME-
PC2, but use the same Workgroup Name – CSSLAB
Name:______________________________________________ Year/Section:______________
A. Directions: Read carefully and write your answer on the space provided for.
Direction: Enumeration. Enumerate at least five (5) step in Providing COMPUTER INFORMATION (2
Points Each)
1. Activate Windows
4. Configure networking