sniter2018 Simulation Viewer
Lab Report
Your Performance
Your Score: 0 of 2 (0%
Elapsed Time: 2 minutes 27 seconds
Task Summary
X Configure settings for Local Area Connection Hide Details
Pass Status: Not Pass
Required Score: 100
EB Use 192,168.0.254 for the IP address
‘Use 255.255.255.0 for the subnet mask
EB Use 192.168.0.5 for the default gateway
Use 163.128,80.93 or 163.128.78.93 for the DNS server
% Configure settings for Local Area Connection 2 Hide Details
EB Use 10,0.255.254 for the IP address
EB Use 255.255.0.0 for the subnet mask
Do not configure a default gateway address
Do not configure a DNS server adress
Explanation
When configuring IP addresses, keep in mind the following:
+ You cannot assign the subnet address to a host (such as 192.168.0.0 or 10.0.0.0).
+ You cannot assign the last address to a host (such as 192.168.0.255 or 10.0.255.255).
Use the following values for the TCP/IP properties in this scenario:
Default
Connection Host address | Subnet ma gateway DNS server address
address
Local Area 5 163.128.80.93 or
coal As 192.168.0.254 255.255.2550 192,168.05 Megs es
Focal Area 10.0.255.254 255.255.0.0 None None
Connection 2 fone None
Complete the following steps:
To configure the Local Arca Connection adapter, click the Local Area
Click the Properties button.
Select Internet Protocol Version 4 (TCP/IPv4) and
‘k Properties,
‘Type the required address and mask values, then click OK.
Click Close.
Click Close.
Right-click the Local Area Connection 2 adapter, and click Properties.
Click the networking icon in the Task Bar and select Open Network and Sharing Center.
‘Connection link.
To manually configure the IP address and default gateway, ensure that Use the following IP address: is selected,
To configure the other network adapter, click the Change adapter settings link
Repeat steps 4 through 6 to modify the TCP/IP settings for the other network adapter.
hitpsednsestout.comichnt-vS-1-10-642/simwindovs him! 26X JpPWhOcHEz JTNEUTJGJTUGY2RuLnRlcaRveXQUY2O.sTIGEGNwemayMDEZLTUMS... 1