1. Start with a square piece of bottom of this square paper. white side up 2. Fold the four corners of into the center and the paper toward the center open out again to create 4. Open out the top and 5. Fold the sides of the Fold the paper in half point bottom triangle flaps horizontally and then verically, these creases. model into the centre, so the creases look like this. creasing well.
9. At one end of the model,
6. Fold down top corner 7. Fold down model in You should now have 2 new 8. Repeat step 6 & 7 at the other of model and then open the other direction diagonal creases like this. end of the model, so you have Open out model along the creases you just out again. the new creases at both ends, made. This will raise the top portion of the as shown. model vertically.
10. Fold top of model 11. Repeat Step 9 and 10 at
over into the box. Its the other end of the box... and taking shape! its finished!
To make a lid, just make
another box, but start with a slightly bigger piece of paper.