Professional Documents
Culture Documents
be switched ON/OFF from three different locations. At each location there are two push-buttons: an ON
push-button with N/O contacts, and an OFF push-button with N/C contacts. The lamp turns ON when
the ON push-button is pressed and remains on when the ON push-button is released. Pressing any OFF
push-button switches the lamp OFF. The lamp cannot be turned ON if a normally-closed contact
daylight switch is OPEN.
a) Draw the main (power) circuit diagram of a system that implements these functionalities.
b) Draw the relay circuit diagram of a system that performs these functionalities.
c) List the devices connected to the PLC inputs and outputs, and develop a LD program that allows a PLC
to perform the same functionalities.