Professional Documents
Culture Documents
51.6:8560
D102028X012
August 2010 8560 Valve
W8299
W6361 / IL
Figure 1. Fisher 8560 Valve with 1052 Actuator and Figure 2. Fisher 8560 Single-Flange Valve
FIELDVUEt DVC6000 Digital Valve Controller
www.Fisher.com
Product Bulletin
51.6:8560
8560 Valve August 2010
Specifications
Valve Sizes and End Connection Styles Construction Materials
Refer to table 2 for standard material selections
NPS J 2, J 3, J 4, J 6, J 8, J 10, and J 12 and component temperature ranges
valve size available in
Material Temperature Capabilities(1)
J wafer or J single-flanged style
(NPS 2 available in wafer only) PTFE and Reinforced PTFE Seals: 46 to
232_C (50 to 450_F)
UHMWPE(3) Seal: 18 to 93_C (0 to 200_F)
Maximum Inlet Pressure(1) NPS 2 Metal Seal: -46 to 538_C (-50 to 1000_F)
NOVEX Seal: 46 to 538_C (50 to 1000_F)
Carbon Steel and Stainless Steel Valve Phoenix III: 46 to 232_C (50 to 450_F)
Bodies: Consistent with CL150 and 300 Flow Characteristic
pressure-temperature ratings per ASME B16.34
Approximately linear
unless limited by material temperature
capabilities. NPS 2 is also consistent with CL600 Flow Direction
Refer to figure 6
Maximum Pressure Drops(1) Flow Coefficients
Consistent with CL150 and 300 See table 1, the section titled Coefficients in this
pressure-temperature ratings per ASME B16.34 bulletin, and also Catalog 12
except for PTFE, UHMWPE and Phoenix III seals Flow Coefficient Ratio(4)
which are derated at some higher 100 to 1
pressure-temperature values. Refer to figure 5
Noise Levels
See Catalog 12 for sound pressure level
Shutoff Classifications prediction
J PTFE, Reinforced PTFE, and UHMWPE(3) Disc Rotation
Seals: Bidirectional shutoff to Class VI per Clockwise to close (when viewing from the drive
ANSI/FCI 70-2 and IEC 60534-4. See figure 4. shaft end) through 90 degrees of disc rotation
J NPS 2 Metal Seal: Bidirectional shutoff.
0.001% of maximum valve capacity (1/10) of Actuator/ Valve Action
Class IV per ANSI/FCI 70-2 and IEC 60534-4. With a diaphragm or piston rotary actuator, the
Maximum Pressure drop is 51 bar (740 psi) valve action is field-reversible. Refer to
forward and 6.9 bar (100 psi) reverse. information provided in the Installation section
J NOVEX Seal: For NPS 3 through 12. and figure 6
Unidirectional shutoff is 0.0001% of maximum
valve capacity (1% of Class IV). See figure 4. Valve Classification
J Phoenix III Seal: For NPS 3 through 12. Face-to-face dimensions of NPS 3 through 12
Bidirectional shutoff to Class VI per ANSI/FCI valves in CL150 or 300, meets API 609 or
70-2 and IEC 60534-4. See figure 4. For the MSS-SP68 standards for face-to-face dimensions
optional Phoenix III Fire-Tested seal(2), consult of wafer-style and single-flange valves
your Emerson Process Management sales office (see figure 8)
(continued)
2
Product Bulletin
51.6:8560
August 2010 8560 Valve
Specifications (continued)
Approximate Weights Mating Flange Capabilities
WAFER STYLE SINGLE FLANGE All sizes compatible with CL150 and 300, NPS 2
VALVE
CL150 CL300 CL150 CL300 also compatible with CL600, flanges (schedule 80
SIZE, NPS
kg or lighter, see figure 8, Dimension M)
2(5) 4 4
3 5 6 6 11
4 9 10 11 18 Shaft Diameters
6 13 15 16 27
8 21 24 27 42 See figure 8
10 34 44 40 78
12 49 64 62 131
ENVIRO-SEALt Packing
Pounds
2(5) 9.5 9.5 This optional J PTFE or J graphite packing
3 10 13 14 25
4 19 23 24 39
system provides improved sealing, guiding, and
6 29 33 35 59
transmission of loading force to control liquid and
8 47 53 59 93 gas emissions (see figure 7). See Bulletin
10 75 96 88 172 59.3:041 ENVIRO-SEAL Packing Systems for
12 107 141 137 288 Rotary Valves for more information.
1. The pressure-temperature limits in this bulletin and any applicable standard or code limitation should not be exceeded.
2. For component selection and applicable fire-tested standards and codes, consult your Emerson Process Management sales office (see table 2).
3. UHMWPE stands for ultra high molecular weight polyethylene.
4. Ratio of maximum flow coefficient to minimum usable flow coefficient.
5. Weight of the CL600 NPS 2 valve is the same as the CL150 and CL300 values.
3
Product Bulletin
51.6:8560
8560 Valve August 2010
4
Product Bulletin
51.6:8560
August 2010 8560 Valve
Table 1. Flow Coefficients(1)
VALVE SIZE, Cv FORWARD FLOW WITH DISC WIDE OPEN (90 DEGREES ROTATION)
NPS CL150 CL300
2 80.2 80.2
3 237 237
4 499 488
6 1250 1110
8 2180 2070
10 3600 3480
12 5400 5130
1. See the section titled Coefficients in this bulletin, and also Catalog 12 for a complete listing of flow coefficients.
5
Product Bulletin
51.6:8560
8560 Valve August 2010
RETAINER RING
SCREWS
W62331 / IL
SINGLE-FLANGED STYLE
RETAINER RING
(PRESSED-IN)
W6234-1 / IL
WAFER STYLE
TAPER PINS
SEAL AND HOLLOW
SPRING PINS PACKING FOLLOWER
RING
6
Product Bulletin
51.6:8560
August 2010 8560 Valve
RETAINING VALVE
VALVE BODY RING BODY
RETAINING
RING
SPRING
PRESSURE-ASSISTED
SEAL SEAL
PRESSURE
RING
ASSISTED
SEAL
B1558-3 / IL
BIDIRECTIONAL SEAL
NPS 2 METAL SEAL PTFE, REINFORCED PTFE, AND UHMWPE SEALS
RETAINING
GRAPHITE RING
GASKET VALVE BODY VALVE
BODY
PRESSURE
ASSISTED GRAPHITE
SEAL GASKET
SEAL RING
NOTE:
1 TEMPERATURE LIMITATIONS DO NOT ACCOUNT FOR THE ADDITIONAL LIMITATIONS IMPOSED BY THE BACKUP RING
USED WITH THIS SEAL. TO DETERMINE THE EFFECTIVE TEMPERATURE LIMITATION OF THE APPROPRIATE SEAL/BACKUP
RING COMBINATION, REFER TO TABLE 2.
A63062 / IL
7
Product Bulletin
51.6:8560
8560 Valve August 2010
ARROW SHOWS PREFERRED FLOW DIRECTION FOR SOFT SEALS ARROW SHOWS FLOW DIRECTION FOR NOVEX METAL SEAL, AND
AND NPS 2 METAL SEALS PREFERRED FLOW DIRECTION FOR PHOENIX METAL SEAL
FORWARD FLOW REVERSE FLOW
RETAINER RING
REVERSE
FLOW
FORWARD
FLOW
75B1181A
A6882 / IL FACE SIDE OF DISC
8
Product Bulletin
51.6:8560
August 2010 8560 Valve
PACKING FOLLOWER
PACKING SET
1
PACKING RING
STANDARD PACKING
PACKING BOX
RING
PACKING SET
PACKING FLANGE
PACKING FLANGE
NUT
SPRING PACK
ASSEMBLY LUBRICANT
PACKING FLANGE
STUD
PACKING BOX
RING
PACKING SET
NOTE:
1 INCLUDES ZINC WASHERS FOR GRAPHITE
RIBBON PACKING ONLY
C0785*A / IL
ENVIRO-SEAL GRAPHITE PACKING SYSTEM
9
Product Bulletin
51.6:8560
8560 Valve August 2010
10
Product Bulletin
51.6:8560
August 2010 8560 Valve
WAFER-STYLE VALVE
SINGLE-FLANGE VALVE
NPS 12 CL300
NPS 2 THROUGH 4 CL150
WAFER-STYLE VALVE
NPS 2 AND 3 CL300
NOTE: NPS 6 THROUGH 12 CL150
DISC CHORDAL SWING DIAMETER AT VALVE FACE IS M. PLEASE VERIFY CLEARANCE WITH PIPING.
NPS 4 THROUGH 12 CL300
14B0833B
14B0835D
B2433 / IL
TYPICAL VALVE MOUNTING
11
Product Bulletin
51.6:8560
8560 Valve August 2010
Coefficients
Table 5. Fisher 8560, CL150, Forward Flow
Valve Valve Rotation, Degrees
Coefficients Size,
NPS 10 20 30 40 50 60 70 80 90
Cv 2.25 11.4 19.9 32.6 48.1 58.9 64.0 69.8 80.2
Kv 1.95 9.86 17.2 28.2 41.6 50.9 55.4 60.4 69.4
FL 2(1) --- 0.78 0.77 0.76 0.74 0.76 0.77 0.76 0.71
XT 0.295 0.289 0.315 0.314 0.357 0.497 0.540 0.518 0.442
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 3.21 20.8 40.5 66.7 90.1 115 150 189 237
Kv 2.78 18.0 35.0 57.7 77.9 99.5 130 163 205
FL 3 0.78 0.89 0.80 0.75 0.68 0.71 0.65 0.61 0.58
XT 0.855 0.602 0.461 0.404 0.372 0.358 0.306 0.259 0.232
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 18.2 52.6 96.7 154 199 270 351 447 499
Kv 15.7 45.5 83.6 133 172 234 304 387 432
FL 4 0.80 0.85 0.79 0.73 0.74 0.69 0.64 0.61 0.53
XT 0.474 0.474 0.500 0.416 0.407 0.326 0.271 0.220 0.196
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 34.7 109 198 321 452 664 882 1180 1250
Kv 30.0 94.3 171 278 391 574 763 1020 1080
FL 6 0.85 0.83 0.75 0.71 0.71 0.67 0.65 0.61 0.55
XT 0.389 0.552 0.528 0.438 0.424 0.331 0.278 0.206 0.203
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 60.5 190 345 560 788 1160 1540 2060 2180
Kv 52.3 164 298 484 682 1000 1330 1780 1890
FL 8 0.81 0.81 0.79 0.82 0.71 0.66 0.60 0.55 0.48
XT 0.368 0.520 0.498 0.412 0.399 0.310 0.261 0.193 0.191
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 83.3 259 463 727 1090 1670 2400 3340 3600
Kv 72.1 224 400 629 943 1440 2080 2890 3110
FL 10 0.81 0.81 0.79 0.82 0.71 0.66 0.60 0.55 0.48
XT 0.626 0.658 0.646 0.622 0.538 0.381 0.285 0.201 0.167
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 125 388 694 1090 1640 2500 3600 5010 5400
Kv 108 336 600 943 1420 2160 3110 4330 4670
FL 12 0.83 0.78 0.78 0.78 0.75 0.66 0.61 0.52 0.47
XT 0.528 0.556 0.547 0.528 0.451 0.324 0.241 0.170 0.141
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
1. The NPS 2 is multirated to CL150, 300 and 600.
12
Product Bulletin
51.6:8560
August 2010 8560 Valve
Table 6. Fisher 8560, CL150, Reverse Flow
Valve Valve Rotation, Degrees
Coefficients Size,
NPS 10 20 30 40 50 60 70 80 90
Cv 2.11 9.96 20.7 34.0 50.5 68.4 81.0 81.0 81.0
Kv 1.83 8.62 17.9 29.4 43.7 59.2 70.0 70.0 70.0
FL 2(1) --- 0.88 0.84 0.77 0.71 0.69 0.67 0.71 0.69
XT 0.399 0.507 0.354 0.334 0.340 0.342 0.359 0.401 0.401
Fd 0.090 0.17 0.26 .034 0.42 0.49 0.57 0.64 0.70
Cv 1.79 23.0 37.0 58.8 91.9 139 192 270 259
Kv 1.55 19.9 32.0 50.9 79.5 120 166 234 224
FL 3 0.70 0.81 0.73 0.76 0.75 0.66 0.60 0.50 0.54
XT 0.449 0.455 0.395 0.417 0.423 0.313 0.256 0.188 0.203
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 17.2 50.2 87.8 146 206 285 365 465 521
Kv 14.9 43.4 75.9 126 178 247 316 402 451
FL 4 0.72 0.84 0.79 0.75 0.71 0.63 0.58 0.53 0.55
XT 0.445 0.471 0.481 0.417 0.370 0.276 0.225 0.191 0.196
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 30.6 100 173 285 424 640 893 1180 1290
Kv 26.5 86.5 150 247 367 554 772 1020 1120
FL 6 0.83 0.83 0.80 0.78 0.76 0.69 0.59 0.52 0.54
XT 0.444 0.608 0.574 0.485 0.441 0.316 0.227 0.176 0.182
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 53.6 175 303 499 743 1120 1560 2070 2260
Kv 46.4 151 262 432 643 969 1350 1790 1950
FL 8 0.79 0.83 0.82 0.79 0.73 0.66 0.58 0.51 0.48
XT 0.413 0.567 0.534 0.449 0.409 0.295 0.213 0.164 0.170
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 84.4 232 423 737 1180 1730 2560 3250 3710
Kv 73.0 200 366 638 1020 1500 2210 2810 3210
FL 10 0.79 0.83 0.82 0.79 0.73 0.66 0.58 0.51 0.48
XT 0.542 0.745 0.673 0.590 0.489 0.380 0.245 0.189 0.156
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 126 347 631 1100 1760 2590 3820 4850 5540
Kv 109 300 546 95.2 1520 2240 3300 4200 4790
FL 12 0.78 0.87 0.85 0.80 0.75 0.69 0.55 0.51 0.47
XT 0.491 0.671 0.610 0.535 0.443 0.343 0.222 0.171 0.141
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
1. The NPS 2 is multirated to CL150, 300 and 600.
13
Product Bulletin
51.6:8560
8560 Valve August 2010
14
Product Bulletin
51.6:8560
August 2010 8560 Valve
Table 8. Fisher 8560, CL300, Reverse Flow
Valve Valve Rotation, Degrees
Size, Coefficients
NPS 10 20 30 40 50 60 70 80 90
Cv 2.11 9.96 20.7 34.0 50.5 68.4 81.0 81.0 81.0
Kv 1.83 8.62 17.9 29.4 43.7 59.2 70.0 70.0 70.0
2(1) FL --- 0.88 0.84 0.77 0.71 0.69 0.67 0.71 0.69
XT 0.399 0.507 0.354 0.334 0.340 0.342 0.359 0.401 0.401
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 1.79 23.0 37.0 58.8 91.9 139 192 270 259
Kv 1.55 19.9 32.0 50.9 79.5 120 166 234 224
3 FL 0.71 0.75 0.77 0.81 0.79 0.71 0.62 0.49 0.59
XT 0.370 0.542 0.433 0.411 0.464 0.469 0.397 0.346 0.286
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 12.7 35.2 61.3 105 163 242 361 463 482
Kv 11.0 30.4 53.0 90.8 141 209 312 400 417
4 FL 0.74 0.80 0.82 0.80 0.77 0.69 0.57 0.51 0.55
XT 0.455 0.499 0.416 0.395 0.410 0.363 0.292 0.235 0.210
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 38.8 106 183 294 436 605 779 976 1100
Kv 33.6 91.7 158 254 377 523 674 844 952
6 FL 0.78 0.81 0.79 0.80 0.74 0.68 0.59 0.58 0.57
XT 0.420 0.433 0.434 0.369 0.360 0.299 0.282 0.214 0.205
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 73.1 200 345 554 821 1140 1470 1840 2090
Kv 63.2 173 298 479 710 986 1270 1590 1810
8 FL 0.80 0.83 0.83 0.80 0.74 0.66 0.58 0.50 0.48
XT 0.405 0.454 0.542 0.451 0.346 0.269 0.239 0.206 0.173
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 66.2 217 399 708 1110 1690 2400 3100 3560
Kv 57.3 188 345 612 960 1460 2080 2680 3080
10 FL 0.80 0.83 0.83 0.80 0.74 0.66 0.58 0.50 0.48
XT 0.505 0.714 0.672 0.557 0.465 0.339 0.243 0.187 0.155
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
Cv 100 328 603 1070 1680 2550 3620 4690 5380
Kv 86.5 284 522 926 1450 2210 3130 4060 4650
12 FL 0.80 0.86 0.87 0.80 0.75 0.66 0.55 0.50 0.48
XT 0.451 0.636 0.595 0.494 0.414 0.303 0.217 0.167 0.138
Fd 0.090 0.17 0.26 0.34 0.42 0.49 0.57 0.64 0.70
1. The NPS 2 is multirated to CL150, 300 and 600.
15
Product Bulletin
51.6:8560
8560 Valve August 2010
Note
Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use, or maintenance of any
product. Responsibility for the
selection, use, and maintenance of any
product remains with the purchaser
and end user.
Fisher, FIELDVUE, and ENVIROSEAL are marks owned by one of the companies in the Emerson Process Management business division of
Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co.
All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they
are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or
applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the
designs or specifications of such products at any time without notice. Neither Emerson, Emerson Process Management, nor any of their affiliated
entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of
any product remains solely with the purchaser and end user.
EFisher
16 Controls International LLC 1994, 2010; All Rights Reserved