Professional Documents
Culture Documents
Linear Drainage Product Guide
Linear Drainage Product Guide
38ARG40
Linear Drainage System
The grate(s) are manufactured from 316 marine grade stainless steel
and the channel and fittings from uPVC.
Stainless Steel Polished Matt Black Gunmetal Grey Bronze Copper Brass
Stainless Steel
Electroplate finishes subject to natural variation with time and local environment. Factors
such as pools/surf beaches may require electropolishing. Contact us for suitability.
PRODUCT APPLICATIONS
Copyright © Stormtech Pty Ltd. Patent 733361. Drawings not to scale, please use dimensions shown.
38PSG40
38PHG40
PS, PH.
PSB
a ng e g rate, AR,
Under cut edge of
PS style grate only.
38 R E38
38G
CORNERS...
Join angles as shown
if turning channel around
a 90 degree corner.
R
38GAM
WaterMark
Level 2 Licence WMKT 21249
Copyright 1989-2015 Stormtech Pty Ltd This drawing is the intellectural property of STORMTECH Pty Ltd. Drawings are not to scale. Use dimensions shown. Patent number: 733361
TM
Stop End
Channel
Tile
Spigot
Waterproofing Flange
substrate
Trap
NOTE, this method requires the channel system to be above and separate from the waterproofing
1-2mm
WaterMark
Level 2 Licence WMKT 21249
Copyright 1989-2015 Stormtech Pty Ltd This drawing is the intellectural property of STORMTECH Pty Ltd. Drawings are not to scale. Use dimensions shown. Patent number: 733361
TM
4B230715TC
e info@stormtech.com.au, w www.stormtech.com.au
Installation sequence for:
38ARG40
38PSG40
38PHG40
Stop End
Channel
Tile
Spigot
Waterproofing Flange
substrate
Trap
NOTE, this method requires the channel system to be above and separate from the waterproofing
1-2mm
WaterMark
Level 2 Licence WMKT 21249
Copyright 1989-2015 Stormtech Pty Ltd This drawing is the intellectural property of STORMTECH Pty Ltd. Drawings are not to scale. Use dimensions shown. Patent number: 733361
TM
4B230715TC
e info@stormtech.com.au, w www.stormtech.com.au
Installation suggestion for:
38ARG40
38PSG40
38PHG40
Slab on Ground
Waterproofing
is fixed to the 1-2mm Stormtech is
floor flange 1 or 2mm lower
than adjacent
tile
Caulk bottom
of tile to edge of
Stormtech
Tile glue
or bed. NOTE, waterproofing slopes towards
the floor flange, with the flange as the
lowest point in the waterproofing
Waterproofing
Substrate
Top steel
Bottom Steel
Copyright 1989-2015 Stormtech Pty Ltd This drawing is the intellectural property of STORMTECH Pty Ltd. Drawings are not to scale. Use dimensions shown. Patent number: 733361
TM
385230715TC
e info@stormtech.com.au, w www.stormtech.com.au
Standard hinged door
Aluminium angle
to support waterproofing
and junction between channel
and door track.
Aluminium angle
to support waterproofing
and junction between channel
and door sil.
Waterproofing
Bi-fold door
387240715TC
e info@stormtech.com.au, w www.stormtech.com.au
Installation suggestion for:
38ARG40
38PSG40
38PHG40
When 38G40 is running parrallel to joist/bearer
Ensure the grate
is lower than tile
Compressed sheeting,
plywood or similar MEMBRANE
Rebate
Timber
joist or
bearer PIPE
Bend PIPE
Rebate created in
Joist or bearer sheeting.
NOTE: For exterior application allow for expansion of 1mm per metre
R
by using quality suitable flexible sealant on channel joins.
WaterMark
Level 2 Licence WMKT 21249
Use PVC solvent cement and primer for ends and outlets.
Copyright 1989-2015 Stormtech Pty Ltd This drawing is the intellectural property of STORMTECH Pty Ltd. Drawings are not to scale. Use dimensions shown. Patent number: 733361
TM
Tile glue
caulk
Rebate for
channel
1 2
WaterMark
Level 2 Licence WMKT 21249
Copyright 1989-2015 Stormtech Pty Ltd This drawing is the intellectural property of STORMTECH Pty Ltd. Drawings are not to scale. Use dimensions shown. Patent number: 733361
TM
386240715TC
e info@stormtech.com.au, w www.stormtech.com.au
Visit stormtech.com.au
Stormtech TM