Professional Documents
Culture Documents
80 Crossways Park West, Woodbury, New York 11797 Phone: +1 (516) 496 3400 Fax +1 (516) 496 0812
Subject : AVR-25 noise rear ch, AVR-20 tuner, AVR20/25 cracked PCB, FL8450
Dear Geoff,
Indicated below are the answers to your questions:
B)Locate pin 10 of the LV1000. Solder 10 nF Ceramic cap between Pin 19 and the ground foil under the
LV1000. This modification reduces a whistle sound. Audible improvement is good.
When measured the change is only 1.5 dB
3)AVR20/25 solder joints and cracked PCB, loose plugs, sockets, ribbon cables:
We noticed the same, the vendor has been advised.