Professional Documents
Culture Documents
Product tested I/A Single Range Hart Pressure Certificate Schneider Electric
Transmitter holder Systems USA, Inc.
38 Neponset Avenue
Foxboro, MA 02035
USA
Intended application The I/A Single Range Hart Pressure Transmitters with the Option -S2 are
intended to be part of safety-related control systems, where the safe state is
to fail the analogue output (4/20 mA) high or low (per customer
configuration).
These versions are suitable for safety-related applications up to SIL 2 acc.
to IEC 61508.
10/222 12. 12 E A4 ® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.
Tel.: +49 221 806-1790, Fax: +49 221 806-1539, E-Mail: industrie-service@de.tuv.com
Specific requirements Only the transmitter types identified by -S2 designators meet SIL 2
TÜV Rheinland Industrie Service GmbH, Am Grauen Stein, 51105 Köln / Germany
requirements.
The instructions of the associated Installation and Operating Manual shall
be considered.
The issue of this certificate is based upon an examination, whose results are documented in
Report No. 968/EZ 308.04/19 dated 2019-09-23.
This certificate is valid only for products which are identical with the product tested.
Köln, 2019-09-23
Certification Body Safety & Security for Automation & Grid Dipl.-Ing. Gebhard Bouwer
www.fs-products.com