BTO9026 Page 1 of 3
Contents of modification
This procedure introduces modification procedure of machine for its KOMTRAX
administration screen to display information of machines equipped with VHMS_
(See AT08320 for communication system.)
Installation Procedure
+ This modification procedure is for a machine equipped with VHMS but not Orbcomm
controller to install Orbcomm controller corresponding to KOMTRAX.
(if not applicable to the above, modify necessary portion as referring to this procedure.)
(1) Remove right exterior cover of operator's seat.
Work will be easier if the
operator's seat Is removed.
Remove the cover
Part number: 195-5:
BT09026BTO9026 Page 2 of 3
(2) Install Orbcomm controller mounting bracket (195-06-75531)
(8) Install Orbcomm controller (7825-12-2500) and cables(195-06-75211)
Installing cover for controller
Antenna for controller Part number: 195-06-75531
Part number: 17M-06-41621 01435-00825 (8)
Orbcomm controller
‘corresponding to KOMTRAX
Part number: 7826-12-2500
01024-80825 (4)
- Bundle up the extra
Electric cable fe cables of antenna
Part number: 195-06-75211 and fix it to hook on
the back of the cover.
Cover
Part number: 17M-54-46520
01435-00825 (4)
Connect the connectors of
floor harness NO.OBC
and new hamess
195-06-75211 NO.OBC
P View from right side of the machine
BT09026Page 3 of 3
Antenna
Part number:
8A13-10-2100
Fixing bracket for
antenna
Part number:
195-54-73450
01024-81016 (2)
Fixing clip for antenna
Part number:
04434-51408 (4)
01024-80816 (4)
Antenna for controller
Part number:
17M-06-41621
5] Fixing clip for antenna (with cushion)
Part number: 04434-52112
07095-20314
01024-81225
View from the rear of the machine
BT09026