Test Report |TEST REPORT
Block Calibration Block No.1
| Serial number 8100191 1001R.
Material CARBON STEEL 1018
[Tested by Xn_Gno han
[reseed Jo
[Boek standard 150 24002012 anal
Chemical composition analysis %
In accordance with: GB/T 699-2015
c [si | Mn
[cr
wo [PTs
020 | 020 | 058 | 007
o.o1 | 0.01 [0.012 | 0.006
Test result: Pass
Heat treatment
‘Work Piece
RNo.l
Material |CARBON STEEL 1018] Surface condition | Ra=25
ical treatment dimension (mm): .40*120*3:
Heat-treated State
1) Treated to 9200 for 30 minutes, water-
quenching.
2) Recheating to 650°C for 3 hours and air
cooling,TEST REPORT TEST REPORT
Grain an: accordance with: GB/T 6394-2017 In accordance with: ISO 2400:2012
Soka janber Test tems Tolerance | Result
Conclusion: Pass
Velocity in accordance with: ISO 24002012 perileten