Professional Documents
Culture Documents
3 & 4 Semester Syllabus E
3 & 4 Semester Syllabus E
PART – B
Sub Code : 06MAT31 IA Marks : 25
Hrs/ Week : 04 Exam Hours : 03 UNIT 5:
Total Hrs. : 52 Exam Marks : 100 Numerical Methods
Introduction, Numerical solutions of algebraic and transcendental equations:-
PART – A Newton-Raphson and Regula-Falsi methods. Solution of linear simultaneous
equations : - Gauss elimination and Gauss Jordon methods. Gauss - Seidel
UNIT 1: iterative method. Definition of eigen values and eigen vectors of a square
Fourier Series matrix. Computation of largest eigen value and the corresponding eigen
Periodic functions, Fourier expansions, Half range expansions, Complex vector by Rayleigh’s power method.
form of Fourier series, Practical harmonic analysis. 6 Hours
7 Hours UNIT 6:
UNIT 2: Finite differences (Forward and Backward differences) Interpolation,
Fourier Transforms Newton’s forward and backward interpolation formulae. Divided differences
Finite and Infinite Fourier transforms, Fourier sine and consine transforms, – Newton’s divided difference formula. Lagrange’s interpolation and inverse
properties. Inverse transforms. interpolation formulae. Numerical differentiation using Newton’s forward
6 Hours and backward interpolation formulae. Numerical Integration – Simpson’s
one third and three eighth’s value, Weddle’s rule.
UNIT 3: (All formulae / rules without proof)
Partial Differential Equations (P.D.E) 7 Hours
Formation of P.D.E Solution of non homogeneous P.D.E by direct
integration, Solution of homogeneous P.D.E involving derivative with UNIT 7:
respect to one independent variable only (Both types with given set of Calculus of Variations
conditions) Method of separation of variables. (First and second order Variation of a function and a functional Extremal of a functional, Variational
equations) Solution of Lagrange’s linear P.D.E. of the type P p + Q q = R. problems, Euler’s equation, Standard variational problems including
6 Hours geodesics, minimal surface of revolution, hanging chain and Brachistochrone
problems.
UNIT 4: 6 Hours
Applications of P.D.E
Derivation of one dimensional wave and heat equations. Various possible UNIT 8:
solutions of these by the method of separation of variables. D’Alembert’s Difference Equations and Z-transforms
solution of wave equation. Two dimensional Laplace’s equation – various Difference equations – Basic definitions. Z-transforms – Definition,
possible solutions. Solution of all these equations with specified boundary Standard Z-transforms, Linearity property, Damping rule, Shifting rule,
conditions. (Boundary value problems). Initial value theorem, Final value theorem, Inverse Z-transforms.
7 Hours Application of Z-transforms to solve difference equations.
7 Hours
3 4
Note:
Text Book: Higher Engineering Mathematics by Dr. B.S. Grewal (36th
Edition – Khanna Publishers) 1. One question is to be set from each unit.
2. To answer Five questions choosing atleast Two questions from each part.
Unit Chapter Article Numbers Page Nos.
No. No.
I 10 10.1 to 10.7, 10.10 and 10.11 375 – 400 ANALOG ELECTRONIC CIRCUITS
(Common to EC/TC/EE/IT/BM/ML)
II 22 22.4, 22.5 716 – 722
Sub Code : 06ES32 IA Marks : 25
III 17, 18 17.1 to 17.5, 18.2 541 – 547 Hrs/ Week : 04 Exam Hours : 03
562 – 564 Total Hrs. : 52 Exam Marks : 100
9 10
Question Paper Pattern: Student should answer FIVE full questions out of
PART – B 8 questions to be set each carrying 20 marks, selecting at least TWO
questions from each part.
UNIT 5: Resonant Circuits: Series and parallel resonance, frequency-
response of series and Parallel circuits, Q –factor, Bandwidth. Coverage in the Texts:
6Hours UNIT 1: Text 2: 1.6, 2.3, 2.4 (Also refer R1:2.4, 4.1 to 4.6; 5.3, 5.6; 10.9
This book gives concepts of super node and super mesh)
UNIT 6: UNIT 2: Text 2: 3.1 to 3.11
Transient behavior and initial conditions: Behavior of circuit elements UNIT 3 and UNIT 4: Text 2 – 7.1 to 7.7
under switching condition and their Representation, evaluation of initial and UNIT 5: Text 2 – 8.1 to 8.3
final conditions in RL, RC and RLC circuits for AC and DC excitations. UNIT 6: Text 1 – Chapter 5;
UNIT 7: Text 1 – 7.4 to 7.7; 8.1 to 8.5
7 Hours UNIT 8: Text 1 – 11.1 to 11.6
UNIT 7:
Laplace Transformation & Applications : Solution of networks, step, ELECTRONIC INSTRUMENTATION
ramp and impulse responses, waveform Synthesis (Common to EC/TC/IT/BM/ML)
7 Hours
Sub Code : 06IT35 IA Marks : 25
UNIT 8: Hrs/ Week : 04 Exam Hours : 03
Two port network parameters: Definition of z, y, h and transmission Total Hrs. : 52 Exam Marks : 100
parameters, modeling with these parameters, relationship between parameters
sets PART – A
6 Hours UNIT – 1:
TEXT BOOKS: Introduction
1. “Network Analysis”, M. E. Van Valkenburg, PHI / Pearson Education, (a) Measurement Errors: Gross errors and systematic errors, Absolute and
3rd Edition. Reprint 2002. relative errors, Accuracy, Precision, Resolution and Significant figures. (Text
2. “Networks and systems”, Roy Choudhury, 2nd edition, 2006 re-print, 2: 2.1 to 2.3)
New Age International Publications. (b) Voltmeters and Multimeters Introduction, Multirange voltmeter,
Extending voltmeter ranges, Loading, AC voltmeter using Rectifiers – Half
REFERENCE BOOKS: wave and full wave, Peak responding and True RMS voltmeters. (Text 1:
1. , “Engineering Circuit Analysis”, Hayt, Kemmerly and DurbinTMH 6th 4.1, 4.4 to 4.6, 4.12 to 4.14, 4.17, 4.18)
Edition, 2002 07 Hours
2. “Network analysis and Synthesis”, Franklin F. Kuo, Wiley UNIT – 2:
International Edition, Digital Instruments
3. “Analysis of Linear Systems”, David K. Cheng, Narosa Publishing Digital Voltmeters – Introduction, DVM’s based on V – T, V – F and
House, 11th reprint, 2002 Successive approximation principles, Resolution and sensitivity, General
4. “Circuits”, Bruce Carlson, Thomson Learning, 2000. Reprint 2002 specifications, Digital Multi-meters, Digital frequency meters, Digital
measurement of time(Text 1: 5.1 to 5.6; 5.9 and 5.10; 6.1 to 6.4)
07 Hours
11 12
UNIT – 3: UNIT – 8:
Oscilloscopes Miscellaneous Topics
Introduction, Basic principles, CRT features, Block diagram and working of (a) Transducers - II –Piezoelectric transducer, Photoelectric transducer,
each block, Typical CRT connections, Dual beam and dual trace CROs, Photovoltaic transducer, Semiconductor photo devices, Temperature
Electronic switch(Text 1: 7.1 to 7.9, 7.12, 7.14 to 7.16) transducers-RTD, Thermocouple (Text 1: 13.15 to 13.20)
06 Hours (b) Display devices: Digital display system, classification of display, Display
UNIT – 4: devices, LEDs, LCD displays(Text 1: 2.7 to 2.11)
Special Oscilloscopes (c) Bolometer and RF power measurement using Bolometer (Text 1: 20.1 to
Delayed time-base oscilloscopes, Analog storage, Sampling and Digital 20.9)
storage oscilloscopes(Text 2: 10.1 to 10.4 ) (d) Introduction to Signal conditioning(Text 1: 14.1 )
06 Hours 06 Hours
ENGINEERING MATHEMATICS - IV
PART – B
Sub Code : 06MAT41 IA Marks : 25
Hrs/ Week : 04 Exam Hours : 03 UNIT 5:
Total Hrs. : 52 Exam Marks : 100 Statistical Methods
Curve fitting by the method of least squares: y = a + bx, y = a + bx + cx2,
PART – A y = axb y = abx, y = aebx, Correlation and Regression.
Text Book: Higher Engineering Mathematics by Dr. B.S. Grewal (36th 1. One question is to be set from each unit.
Edition – Khanna Publishers) 2. To answer Five questions choosing atleast Two questions from each part.
PART – B Question Paper Pattern: Student should answer FIVE full questions out of
UNIT 5: 8 questions to be set each carrying 20 marks, selecting at least TWO
Root–Locus Techniques: Introduction, The root locus concepts, questions from each part
Construction of root loci.
6 Hours COVERAGE IN THE TEXT BOOK:
UNIT 1: 1.1, 2.1, 2.2, 2.7
UNIT 6: UNIT 2: 2.4, 2.5, 2.6, 2.7
Stability in the frequency domain: Mathematical preliminaries, Nyquist UNIT 3: 5.1, 5.2, 5.3, 5.4, 5.5
Stability criterion, (Inverse polar plots excluded), Assessment of relative UNIT 4: 6.1, 6.2, 6.4, 6.5, 6.6
stability using Nyquist criterion, (Systems with transportation lag excluded). UNIT 5: 7.1, 7.2, 7.3
UNIT 6: 9.1, 9.2, 9.3, 9.4,
7 Hours UNIT 7: 8.1, 8.2, 8.4, 8.5, 8.6
UNIT 8: 12.1, 12.2, 12.3, 12.6
UNIT 7:
Frequency domain analysis: Introduction, Correlation between time and
frequency response, Bode plots, All pass and minimum phase systems,
Experimental determination of transfer functions, Assessment of relative
stability using Bode Plots.
25 26
SIGNALS & SYSTEMS UNIT 6:
(Common to EC/TC/IT/BM/ML) Applications of Fourier representations: Introduction, Frequency response
of LTI systems, Fourier transform representation of periodic signals, Fourier
Sub Code : 06EC44 IA Marks : 25 transform representation of discrete time signals
Hrs/ Week : 04 Exam Hours : 03 7 Hours
Total Hrs. : 52 Exam Marks : 100 UNIT 7:
Z-Transforms – 1: Introduction, Z – transform, properties of ROC,
PART – A properties of Z – transforms, inversion of Z – transforms.
UNIT 1: 07 Hours
Introduction: Definitions of a signal and a system, classification of signals, UNIT 8:
basic Operations on signals, elementary signals, Systems viewed as Z-transforms – 2: Transform analysis of LTI Systems, unilateral Z-
Interconnections of operations, properties of systems. Transform and its application to solve difference equations.
7 Hours 06 Hours
TEXT BOOK
UNIT 2: Simon Haykin and Barry Van Veen “Signals and Systems”, John Wiley &
Time-domain representations for LTI systems – 1: Convolution, impulse Sons, 2001.Reprint 2002
response representation, Convolution Sum and Convolution Integral.
6 Hours REFERENCE BOOKS:
1. Alan V Oppenheim, Alan S, Willsky and A Hamid Nawab, “Signals
UNIT 3: and Systems” Pearson Education Asia / PHI, 2nd edition, 1997. Indian
Time-domain representations for LTI systems – 2: properties of impulse Reprint 2002
response representation, Differential and difference equation Representations, 2. H. P Hsu, R. Ranjan, “Signals and Systems”, Scham’s outlines, TMH,
Block diagram representations. 2006
7 Hours 3. B. P. Lathi, “Linear Systems and Signals”, Oxford University Press,
2005
UNIT 4: 4. Ganesh Rao and Satish Tunga, “Signals and Systems”, Sanguine
Fourier representation for signals – 1: Introduction, Discrete time and Technical Publishers, 2004
continuous time Fourier series (derivation of series excluded) and their Question Paper Pattern: Student should answer FIVE full questions out of
properties . 8 questions to be set each carrying 20 marks, selecting at least TWO
6 Hours questions from each part
Coverage in the Text:
PART – B UNIT 1: 1.1, 1.2, 1.4 to 1.8
UNIT 2: 2.1, 2.2
UNIT 5: UNIT 3: 2.3, 2.4, 2.5
Fourier representation for signals – 2: Discrete and continuous Fourier UNIT 4: 3.1, 3.2, 3.3, 3.6
transforms(derivations of transforms are excluded) and their properties. UNIT 5: 3.4, 3.5, 3.6
UNIT 6: 4.1, 4.2, 4.3, 4.5, 4.6.
6 Hours UNIT 7: 7.1, 7.2, 7.3, 7.4, 7.5
27 28
UNIT 8: 7.6 (Excluding ‘relating the transfer function and the State-Variable
description, determining the frequency response from poles and zeros) and PART-B
7.8
UNIT 5: Procedures, Tasks, and Functions: Highlights of Procedures,
FUNDAMENTALS OF HDL tasks, and Functions, Procedures and tasks, Functions.
(Common to EC/TC/IT/BM/ML) Advanced HDL Descriptions: File Processing, Examples of File Processing
29 30
LINEAR IC’s & APPLICATIONS
(Common to EC/TC/IT/BM/ML) PART – B
UNIT 5:
Sub Code : 06EC46 IA Marks : 25 More applications: Clamping circuits, Peak detectors, sample and hold
Hrs/ Week : 04 Exam Hours : 03 circuits, V to I and I to V converters, Log and antilog amplifiers, Multiplier
Total Hrs. : 52 Exam Marks : 100 and divider, Triangular / rectangular wave generators, Wave form generator
design, phase shift oscillator, Wein bridge oscillator. (Text 1: Chapter 7 –
PART - A 7.4, 7.5, 7.6; Chapters 10 -10.1, 10.2, 10.3, 10.5; Text 2: Sections 4.5, 4.8 and
UNIT 1: 4.9)
Operational Amplifier Fundamentals: Basic Op-Amp circuit, Op-Amp 6 Hours
parameters – Input and output voltage, CMRR and PSRR, offset voltages and
currents, Input and output impedances, Slew rate and Frequency limitations; UNIT 6:
Op-Amps as DC Amplifiers- Biasing Op-Amps, Direct coupled -Voltage Non-linear circuit applications: crossing detectors, inverting Schmitt
Followers, Non-inverting Amplifiers, Inverting amplifiers, Summing trigger circuits, Monostable & Astable multivibrator, Active Filters –First
amplifiers, Difference amplifier. (Text 1: Chapter 1 – 1.2, Chapter 2 – 2.1, and second order Low pass & High pass filters. (Text 1: Chapter 9 – 9.2, 9.3,
2.2, 2.3, 2.4, 2.5, and Chapter 3 – 3.1, 3.2, 3.3, 3.4, 3.5, 3.6) 9.5, 9.6; Chapter 11 – 11.2, 11.3, 11.4, 11.5)
7 Hours 7 Hours
UNIT 7:
UNIT 2: Voltage Regulators: Introduction, Series Op-Amp regulator, IC Voltage
Op-Amps as AC Amplifiers: Capacitor coupled Voltage Follower, High regulators, 723 general purpose regulator, Switching regulator. (Text 2:
input impedance - Capacitor coupled Voltage Follower, Capacitor coupled Chapter 6)
Non-inverting Amplifiers, High input impedance - Capacitor coupled Non- 6 Hours
inverting Amplifiers, Capacitor coupled Inverting amplifiers, setting the UNIT 8:
upper cut-off frequency, Capacitor coupled Difference amplifier, Use of a Other Linear IC applications: 555 timer - Basic timer circuit, 555 timer
single polarity power supply. (Text 1: Chapter 4) used as astable and monostable multivibrator, Schmitt trigger; PLL-
6 Hours operating principles, Phase detector / comparator, VCO; D/A and A/ D
UNIT 3: converters – Basic DAC Techniques, AD converters(Text 2: Chapter 8 –
Op-Amps frequency response and compensation: Circuit stability, 8.1, 8.2, 8.3, 8.4, 8.5; Chapter 9 – 9.1, 9.2, 9.3, 9.4; Chapter 10 – 10. 1,
Frequency and phase response, Frequency compensating methods, Band 10.2, 10.3 ; Except 8.3.1, 8.4.1, 10.2.5, 10.4)
width, Slew rate effects, Zin Mod compensation, and circuit stability 7 Hours
precautions. (Text 1: Chapter 5 – 5.1, 5.2, 5.3, 5.5, 5.6, 5.9, 5.10)
6 Hours TEXT BOOKS:
UNIT 4: 1. “Operational Amplifiers and Linear IC’s”, David A. Bell, 2nd edition,
OP-AMP Applications: Voltage sources, current sources and current sinks, PHI/Pearson, 2004
Current amplifiers, instrumentation amplifier, precision rectifiers, Limiting 2. “Linear Integrated Circuits”, D. Roy Choudhury and Shail B. Jain, 2nd
circuits, (Text 1: Chapter 6 – 6.1, 6.2, 6.4, 6.8, and Chapter 7 – 7.1, 7.2, 7.3) edition, Reprint 2006, New Age International
7 Hours
31 32
REFERENCE BOOKS: MICROCONTROLLERS LAB
1. “Op - Amps and Linear Integrated Circuits”, Ramakant A. (Common to EC/TC/EE/IT/BM/ML)
Gayakwad, 4th edition, PHI,
2. “Operational Amplifiers and Linear Integrated Circuits”, Robert. F. Sub Code : 06ESL47 IA Marks : 25
Coughlin & Fred.F. Driscoll, PHI/Pearson, 2006 Hrs/ Week : 03 Exam Hours : 03
3. “Op - Amps and Linear Integrated Circuits”, James M. Fiore, Total Hrs. : 42 Exam Marks : 50
Thomson Learning, 2001
4. “Design with Operational Amplifiers and Analog Integrated
Circuits”, Sergio Franco, TMH, 3e, 2005 I. PROGRAMMING
Question Paper Pattern: Student should answer FIVE full questions out of
8 questions to be set each carrying 20 marks, selecting at least TWO 1. Data Transfer - Block move, Exchange, Sorting, Finding largest element in
questions from each part an array.
2. Arithmetic Instructions - Addition/subtraction, multiplication and division,
Coverage in the Text books: square, Cube – (16 bits Arithmetic operations – bit addressable).
UNIT 1: (Text 1: Chapter 1 – 1.2, Chapter 2 – 2.1, 2.2, 2.3, 2.4, 2.5, and 3. Counters.
Chapter 3 – 3.1, 3.2, 3.3, 3.4, 3.5, 3.6) 4. Boolean & Logical Instructions (Bit manipulations).
UNIT 2: Text 1: Chapter 4 5. Conditional CALL & RETURN.
UNIT 3: Text 1: (Text 1: Chapter 5 – 5.1, 5.2, 5.3, 5.5, 5.6, 5.9, 5.10) 6. Code conversion: BCD – ASCII; ASCII – Decimal; Decimal - ASCII;
UNIT 4: (Text 1: Chapter 6 – 6.1, 6.2, 6.4, 6.8, and Chapter 7 – 7.1, 7.2, 7.3) HEX - Decimal and Decimal - HEX .
UNIT 5: (Text 1: Chapter 7 – 7.4, 7.5, 7.6; Chapters 10 -10.1, 10.2, 10.3, 7. Programs to generate delay, Programs using serial port and on-Chip timer /
10.5; Text 2: Sections 4.5, 4.8 and 4.9) counter.
UNIT 6: Text 1: Chapter 9 – 9.2, 9.3, 9.5, 9.6; Chapter 11 – 11.2, 11.3, 11.4,
II. INTERFACING:
11.5
UNIT 7: Text 2: Chapter 6
UNIT 8: Text 2: Chapter 8 – 8.1, 8.2, 8.3, 8.4, 8.5; Chapter 9 – 9.1, 9.2, 9.3, Write C programs to interface 8051 chip to Interfacing modules to develop
9.4; Chapter 10 – 10. 1, 10.2, 10.3; Except 8.3.1, 8.4.1, 10.2.5, single chip solutions.
10.4 8. Simple Calculator using 6 digit seven segment display and Hex Keyboard
interface to 8051.
9. Alphanumeric LCD panel and Hex keypad input interface to 8051.
10. External ADC and Temperature control interface to 8051.
11. Generate different waveforms Sine, Square, Triangular, Ramp etc. using
DAC interface to 8051; change the frequency and amplitude.
12. Stepper and DC motor control interface to 8051.
13.. Elevator interface to 8051.
33 34
HDL LAB
(Common to EC/TC/IT/BM/ML) • ALU should use combinational logic to calculate an output based on the
four bit op-code input.
Sub Code : 06ECL48 IA Marks : 25 • ALU should pass the result to the out bus when enable line in high, and
Hrs/ Week : 03 Exam Hours : 03 tri-state the out bus when the enable line is low.
Total Hrs. : 42 Exam Marks : 50 • ALU should decode the 4 bit op-code according to the given in example
below.
Note: Programming can be done using any compiler. Download the OPCODE ALU OPERATION
programs on a FPGA/CPLD boards such as 1. A+B
Apex/Acex/Max/Spartan/Sinfi/TK Base or equivalent and performance 2. A–B
testing may be done using 32 channel pattern generator and logic analyzer 3. A Complement
apart from verification by simulation with tools such as Altera/Modelsim or 4. A*B
equivalent.
5. A AND B
6. A OR B
PROGRAMMING (using VHDL and Verilog)
7. A NAND B
8. A XOR B
1. Write HDL code to realize all the logic gates
2. Write a HDL program for the following combinational designs
a. 2 to 4 decoder 5. Develop the HDL code for the following flip-flops, SR, D, JK, T.
b. 8 to 3 (encoder without priority & with priority) 6. Design 4 bit binary, BCD counters (Synchronous reset and
c. 8 to 1 multiplexer Asynchronous reset) and “any sequence” counters
d. 4 bit binary to gray converter
e. Multiplexer, de-multiplexer, comparator.
3. Write a HDL code to describe the functions of a Full Adder Using three
modeling styles.
4. Write a model for 32 bit ALU using the schematic diagram shown below INTERFACING (at least four of the following must be covered using
A (31:0) B (31:0) VHDL/Verilog)
1. Write HDL code to display messages on the given seven segment display
and LCD and accepting Hex key pad input data.
Opcode (3:0)
2. Write HDL code to control speed, direction of DC and Stepper motor.
35 36
4. Write HDL code to generate different waveforms (Sine, Square,
Triangle, Ramp etc.,) using DAC change the frequency and amplitude.
***********
37