Professional Documents
Culture Documents
Go to Back of PQR.
Are the results
Yes for tensile,
No bend and toughness test of
(if (QW 140)
No For tensile test are qty
required) stated?
specimen, area and unit (QW – 451.1)
stress calculation right
Yes
No
Is location of failure stated
Yes
No Is unit stress >
(QW – 153)
SMTS of base metal
E No
Yes
Has PQRNobeen revised Is the result stated & OK (QW – 163)
Is PQR signed and dated
No
Yes No Are results forYes
toughness
test (if any) OK (QW – 172)
J
Accept for Yes
Place WPS & PQR side by side
detailed
review
E Go to tables as follows
SMAW - QW 253
GTAW - QW 256
No QMAW - QW 255
SAW – QW 254
C Check WPS/PQR for QW 402 to
QW 410 for the following
ACCEPT