Professional Documents
Culture Documents
Catalogue 2012
2 John Deere
Reman
Engines Electrical Hydraulic & Drivetrain Engine Components Fuel Injection Electronics
–– Complete engines –– Starters –– Pumps and motors –– Connecting rods –– Pumps –– Moisture Sensors
–– Complete block –– Alternators –– Axles –– Cylinder heads –– Nozzles –– Controllers
assembles –– AC compressors –– Transmissions –– Water and oil pumps –– Electrohydraulic
–– Basic engines –– Generators –– Clutches –– Crankshafts joysticks
–– Short blocks –– Turbochargers –– Displays
–– Camshafts
Reman
Part No. Description Application Regular Special Rebuilt vs Reman:
$854.95 $812.20
SE501826
SE502624
Alternator
Check your application with your John Deere dealer for suitability.
4 John Deere
Check your application with your John Deere dealer for suitability.
Harvester Parts 2012 Catalogue 5
Check your application with your John Deere dealer for suitability.
6 John Deere
Harvester Parts
The key to the smooth feeding and productive harvesting of the draper cutting
A black belt in efficiency platforms are the design of the draper belt system. The belts are constructed
of rubber-coated fabric with moulded slats and guide ribs to ensure positive
Every drive belt for John Deere Combine Harvesters is specially developed for
belt tracking.
its particular application. In addition to the specific dimensions, it features a
special rubber mix and an Aramid cord custom-designed for heavy-duty loads. Description Part No. Fits Models Regular
These cords allow for maximum power transmission without being liable to
linear extension. Flat Belt, Belt Assy, Draper-side 9 AH159534 925D, 930D, 936D $696.30
Flat Belt, Belt Assy, Draper Side AH159535 925D, 930D, 936D $760.10
Description Part No. Fits Models Regular Special
Flat Belt, Belt Assy, Draper Side AH159536 925D, 930D, 936D $962.50
Header and Reel H156796 9650STS, 97500STS, $239.75 $227.75
Pump (Standard) 9660STS, 9760STS, 9860STS, Flat Belt, Belt Assy, Draper Short AH159537 925D, 930D, 936D $463.10
9670STS, & 9770STS Flat Belt, Belt Assy, Draper Movable AH159558 925D, 930D, 936D $500.50
Feeder House H203474 9560STS, 9660STS, 9760STS, $196.15 $186.35 Flat Belt, Belt Assy, Centre Draper AH203047 925D, 930D, 936D $412.50
Fixed Speed 9860STS, 9570STS, 9670STS,
& 9770STS Flat Belt, Belt Assy, Side Draper AXE12531 625D $651.20
Feed Accelerator H221731 9650STS, 9750STS, 9560STS, $203.40 $193.25 Flat Belt, Belt Assy, Side Draper AXE14731 630D $816.20
(Standard Speed) 9660STS, 9760STS, &
9860STS, Flat Belt, Belt Assy, Side Draper AXE12532 635D $981.20
Tailings Auger H154731 9650STS, 9750STS, 9560STS, $67.55 $64.15 *Draper belts may need to be cut to size for some models
and Elevator 9660STS, 9760STS, 9860STS,
9570STS, 9670STS, 9770STS,
& 9870STS
Knife guards
STS Variable H221498 9650STS, 9750STS, 9560STS, $784.60 $745.35
Rotor Drive 9660STS, 9760STS, 9570STS, Built tough to withstand all crop and soil conditions, genuine John Deere knife
9670STS, & 9770STS guards maximise your combines cutting performance, ensuring you receive the
yields you deserve.
Fine-tooth, bolt-on H213799 900, 900F and 900R $2.20 $2.10 Long-short-long, H229539 600D, 600R and 900D $47.25 $44.90
long tip, high wear
Coarse-tooth, bolt-on H213800 900, 900F and 900R $2.55 $2.40
Short-long-short, H213507 600R, 600F, 635FD & 640FD $29.80 $28.30
Other sickle sections blunt tip, black
Section, rocky H168316 900, 900F and 900R $3.10 $2.95 Long-short-long, H213398 600R, 600F, 635FD & 640FD $29.80 $28.30
conditions, bolt-on, 3-in. blunt tip, black
Yellow Dichromate, H213805 200 and 218 Drapers $2.20 $2.10 Short-long-short, H229538 600R, 600F, 635FD & 640FD $45.75 $43.45
riveted, 3-in. blunt tip, high wear
Long-short-long, H229537 600R, 600F, 635FD & 640FD $45.75 $43.45
blunt tip, high wear
Check your application with your John Deere dealer for suitability.
Harvester Parts 2012 Catalogue 7
Anything you need for in-field repair. KIT — Steel auger fingers, retainers, AH214868 $149.15 $141.70
pins (10 each)
900R, 900F, 600R, 600F, 900D, 600D, 635FD and 640FD Draper Platforms:
Reel fingers
Hold-down clips
Full bat, fingers (10) AH166489 $50.85 $48.30
Hold-down clips must be durable to prevent the clip from breaking under
LH bat, fingers (10) AH166490 $54.50 $51.80
stress. The hold-down clip keeps the knife section in the shearing position.
RH bat, fingers (10) AH166491 $54.50 $51.80
Description Part No. Fits Models Regular Special No bat, fingers (10) AH166492 $54.50 $51.80
Hold-down clips
Standard, adjustable AH218547 600D, 600F, 600R and 900D $10.90 $10.35
High, adjustable AH218548 600D, 600F, 600R and 900D $10.90 $10.35 Knife assemblies
Standard H161239 600F, 600R and 900D $5.40 $5.15 Sectionalised knife assemblies are readily transportable, can be quickly and
High H161240 600F, 600R and 900D $5.40 $5.15 easily bolted together, and feature a lap joint for a strong hold.
Standard, adjustable AH218547 600D, 600F, 600R, 900D, $10.90 $10.35 Description Part No. Fits Models Regular Special
935FD and 940FD
Knife assemblies
High, adjustable AH218548 600D, 600F, 600R, 900D, $10.90 $10.35
935FD and 940FD Sectionalised Knife Assembly AH215256 900D $479.50 $455.55
with Head, Dura-Twin (Fine)
Wear plate
Sectionalised Knife Assembly, AH219604 600F, 600R, $348.70 $331.25
Knifeback wear plate H153157 200, 900, 900F and 900R $4.35 $4.15 Dura-Twin (Fine) 600D, 900D
& 640FD
Splice Joint Kit for Sectionalised AH205715 600F, 600R, $32.70 $31.05
Feederhouse chains Knife Assembly, Dura-Twin (Fine) 600D, 900D,
635FD & 640FD
Chains are often subject to severe operating conditions and require thorough Sectionalised Knife Assembly AH213833 900F & 900R $297.85 $282.95
examination regularly. John Deere’s chains provide longer wear-life and require with Head, Dura-Lite (Fine)
less maintenance. Don’t risk your harvest with a low quality chain.
Check your application with your John Deere dealer for suitability.
8 John Deere
KIT — Feed flight repair AH204534 Rear (set of 3) $556.85 KIT — 3-in. cutting system AH202442 900 Series Platforms $39.55
KIT — Threshing element AH167739 Standard, smooth (set of 3) $329.25 KIT — 4-in. cutting system AH202628 600D, 600F, 600R, 900D, $52.20
635FD and 640FD
KIT — Threshing element AH170608 Standard, rice, smooth $366.65
(set of 3) Knifehead Section Kit AH211795 900F, 900R and 900D $117.70
including hardware
KIT — Threshing element, rear* AH216677 Rifled, grain/corn (3) $344.20
KIT — Separator tine AH208554 Standard (set of 3) $187.05
*Fits rear STS Bullet Rotor™ and all of standard rotor. Grain handling parts
Description Part No. Regular
9650, 9750, 9660, 9760, 9670 &9770 STS Harvesters:
Concaves
General Purpose Chaffer, Manual Adjustment AH211936 $1351.25
Improve your threshing and
General Purpose Sieve, Manual Adjustment AH211944 $1128.95
separating performance with
a new concave. Consult your
dealer and operator’s manual
to match the type of concave Elevator chain
to your crop variety and
conditions.
Check your application with your John Deere dealer for suitability.
Harvester Parts 2012 Catalogue 9
There are three ways that John Deere FarmSight™ can help improve your farm’s productivity and profitability:
1. Machine Optimisation lets you easily manage equipment maintenance and monitor vital machine data, such as fuel level,
service needs and diagnostic codes.
2. Logistics Optimisation lets you track your equipment from anywhere you have a wireless connection, even from remote
locations. Provide operators with maps and directions to save time.
g Decision Support helps you respond to changing conditions and manage risk with easily accessed, timely information
3. A
about your operation. With John Deere FarmSight™, you can transform your operational data into actionable, information-
based insights to improve productivity — and your bottom line.
Check your application with your John Deere dealer for suitability.
10 John Deere
Hy-Gard™
Hy-Gard™ is a hydraulic and transmission oil formulated to
See your
local dealer protect heavily-loaded gears, wet brakes, wet clutches, and
hydraulic systems.
for a great
Key Advantages
price!
–– Multi-viscosity formula for a wide range of operating temperatures
–– Prevents wear on high-torque heavy-loaded gears and bearings
–– Prevents wear and corrosion in hydraulic pumps
–– Provides proper friction for wet brakes and clutches, reducing
slippage, wear and chatter
–– Prevents final drive wear due to anti-wear additives for gears
Therma-Gard™
Genuine John Deere lubricants Therma-Gard™ is a high-performance anti-freeze/summer
coolant designed to meet and exceed today’s heavy-duty
Treat your equipment to the full John Deere oil and engine requirements.
maintenance line.
Key Advantages
Just like our equipment, our lubricants are developed by expert
–– 6 years/6,000-hour service life to reduce downtime and
John Deere engineers who know heavy equipment inside and
lower operating costs
out. They design our lubricants right alongside our engines,
performing extensive tests to ensure there are no better fluids –– 20% longer service intervals which translates to savings
for your machine. You’ll find that simply choosing the right –– High thermal and oxidative stability required by engines
products can up your productivity now, and protect your equipped with cooled exhaust gas recirculation (EGR)
machine for the long run.
–– Provides excellent protection against corrosion and deposits,
extends water pump life and prevents cylinder liner cavitation
Plus-50™ II
Description Size Part No.
Plus-50™ II is a premium Engine oil and is the next generation Pre-Mix 5L CP6175
of superior John Deere engine oil. Plus-50™ II protects up to Pre-Mix 10L CP6176
500 hours, when used with John Deere filters in John Deere Pre-Mix 20L CP6177
engines, saving you money on maintenance while giving you
Pre-Mix 205L CP6178
added peace of mind.
Concentrate 5L CP6179
Key Advantages
–– Exceeds API CJ-4 performance level for diesel engines
–– Exceeds API SM performance level for petrol engines Grease
–– Formulated specifically to inhibit oxidation, deposits, Grease is an inexpensive
corrosion, and wear with superior soot control insurance that keeps your
–– Reduces maintenance costs and downtime equipment running strong.
–– Provides maximum sludge and varnish control Top quality grease teamed
with a first-rate grease gun is
–– Excellent low-temperature fluidity reduces engine wear in
money well spent.
cold weather 10% OFF
–– Drain intervals may be extended up to 500 hours when used CARTON
PURCHASES
with John Deere filters in John Deere engines (PK 10)
Check your application with your John Deere dealer for suitability.
Harvester Parts 2012 Catalogue 11
Maintenance Parts 2
3
10
9
8 7
1 Cab Recirculation Air Filter 5 Engine Oil Filter 8 Cab Air Filter
H220870 (9570-9870, S570) $82.90 RE504836 (9570, S550) $16.25, RE509672 (9670, AH115833 (9570-9870) $59.55
L155288 (S-Series) $23.10 9970, S660 & S670) $28.45, RE530107 (9870, S680 Clean or replace every 200 hours and as required.
Clean or replace every 200 hours and as required. & S690) $72.50
Replace after 100 hours, then after every 250 hours or every 9 Heavy Duty Cab Air Filter
2 Engine, Air, Secondary year, whichever comes first. Extend service interval by 50 AH168783 (9570-9870) $119.55
AH212295 (9570-9870, S550) $125.90 percent when using Plus-50 II™ oil or Plus-50™ oil and a Clean or replace every 200 hours and as required.
HXE11091 (S660-S690) $191.25 John Deere oil filter.
Pro Drive Filter (if equipped)
Change Secondary filter only with primary filter. Example: 250 hours extends to 375 hours. 10
Change annually or as required with Primary Air Filter. AH128449 (9570-9870, S-Series) $80.20
6 Hydrostatic Charge Filter (Pro Drive only) Replace after first 100 hours then every 400 hours.
AN207368 (9770-9870) $223.15
3 Engine, Air, Primary Replace every 400 hours.
AH222225 (9570-9870, S550) $207.20
HXE11090 (S660-S690) $198.70
Change annually and clean or change as required 7 Charge Pump/Main Hydraulic/Main
Engine Gear Case Filter
4 Engine Fuel Filters AH128449 (9570-9870, S-Series) $80.20
RE522878 (9570, S550) $50.85, RE525523 Filter Kit Filter change interval for all three filters is 400 hours.
(9670 and 9770) $167.00, RE532952 (Primary 9870)
$138.15, RE539465 (Primary S660-S690) $119.95
RE533910 (Secondary 9870, S660-S690) $159.40
Replace fuel filters every 500 hours.
Check your application with your John Deere dealer for suitability.
JDParts
You invested in John Deere Put simply, JDParts provides an easy way No matter the time of day or your
to get the genuine John Deere parts you location, JDParts gives you access to the
for several reasons: need from your John Deere dealer with parts you need in just a few clicks. You’ll
–– A trusted name in quality equipment speed and ease. enjoy these benefits:
–– Product support that’s second to none –– Order online through your dealer 24/7/365
–– A first class dealership network No waiting lines here. –– Pick up orders as early as the next day from your
With JDParts, shopping for replacement John Deere dealer
But a provider of convenient 24 x 7
online shopping is probably something parts for your equipment just became as –– Available home delivery
you don’t think of when you think of easy as shopping for books or clothes. –– Access to complete parts catalogue with
product images
John Deere. That’s all about to change
thanks to JDParts. –– Access to local John Deere dealer pricing
and inventory
All prices are Recommended Retail Price (RRP) quoted in Australian Dollars, including GST. RRP does not
include freight, assembly or dealer charges. Product specifications and availability are subject to change
without notice. Some of these products, options or accessories may not be available from all dealers.
Check your application with your John Deere dealer for suitability. Prices valid until 31st August 2012. 1800 800 981 | JohnDeere.com.au