FLUID
MACHINE
CONTROL
Valves & EquipmentStrainers
Ns)
Applications
Steam, weter, oll or gas where protection fram foreign
matter ina pipeline 's required,
Construction
» The FMC Style FSA (carbon steel) & PSSA (stainless steel)
fabricated
> Y-type strainers are normally supplind with 2 bolted (slip
hinge) caver andare available with elther flanged or butt
weld connections. Flanges are raised
> face and drilled in accordance with ASME 816.5 and come
standard with baci-faced hotthotes.
» Special dimensions are available. For additional pressure
50 flanges. and materials of construction {Low Carbon
Steel, Alloy 20, Hastelioy C276,Monel, and Duplex
Stainioss Steel)
Features
The Keekley Style FSA and FSSA strainer screens are plot
ed through the "
> use of machined grooves in both the body and caver to
ensure proper alignment. The cover gasket is designed for
specific pressure and temperatureratings.
> FMC Style FSA and FSSA strainers have studs and nuts and
are furnished with & blow down plug as standard Blind
covers are available upon request.
Self Cleaning
> Solf cleaning of the Style FSA and FSSA strainers are
accomplished byopening the valve or drain plug
connected to the blow aff port:
Design Features
> Standard Sizes from 2"to 90°,
> 95 316/55 304/MS Wedge wire screens are standard.
(Other materials available upon request
Perforated screens are available,
> Standard body material is SS304/5S3 16NCB/M.S, ther
‘materials are available upon request,
> Drain and sifferential pressure connections are standard.
> 1508 RF Flanged connections are standard, 3008 and
600i flanges are availate
‘Screens
Im Standard screens are perforated 304 stainless steel and
are spot welded formaximum strength,
> Different size perforations and moshies are available in
stainless steel, monel, and brass to meet specific media
requirements. if media is not indicated ¥" perforated 304
stainless stacl screens will be supplied.
ewrfmegroupsinStrainers
Basket Strainer
Applications
Steam, weter, oll or gas where protection fram foreign
matter ina pipeline is required,
Construction
> The FMC Style FB family of fabricated basket strainers are
available in
> carbon stoel or stainiess steel. ther flanged or butt weld
connections are furnished. These basket strainers are
available with 3 Quick Open Cover
> [FB-Q), Bolted Stip Hinge Cover (FB-H1, or Integral Swing
Arm Davit
> Assembly (Style FB-D). Flanges are raised fate and dried
In accordance with ASME B16.5 and come standard with
back-faced bolthales.
> Special dimensions are available. For additional pressure
classes anges and materials of cansruction Low Carbon
Steel, Aly 20, Hastelioy C276,Monal, and Duplex
Stainless Steel)
Design Features
» Standard Sires from 2" to 60°.
J» 55.316/55 304/MS Wedge wire screens are standard.
Other materials avalable upon request.
Perforated screens are available.
1 Standard body material is $$304/5S316AWCB/M.S, Other
‘materials are available upan request.
‘> Drain and differential pressure connections are standard,
> 1508 RF Flanged connections are standard. 300% and
‘8008 flanges are available.
Baskets
> Baskets are perforated 204/316/3161 stainless steel and
are spot welded for maximarn
m strength. Different size perforations and meshes are
available in stainless steel, monel, meet specific media
requirements, If media is not indicated, &° perforated 304
stainless steel baskets will be supplied
‘Cleaning
> Cleaning of the Style FE strainer is accomplished by
‘removing the cover and pulling out the basket.
> Strainer information Section for
= =aStrainers
ate) tral
Applications
Stearn, water, oll or gas where protection fram foreign
matter ina pipelineis required.
Construction
> The FMC Style T "Tee" strainers are supptiod with weld
‘neck flange ar butt connections,
>» Ring Type joint connections are also avaiable; for ring type
jsin€ specify ring number and style.
The Style T& TO strainers are suitable for either
horizontal or vertical(doyanward flow) piping.
> Spocial dimensions are available. For additional pressure
classesflanges and matenals of construction {Low Carbon
Stwol, Alloy 20, Hastelicy C276,Monel, and Duplex
Stainioss Steel)
‘ Design Features
» ® Standard Sizes fram 2" to GO",
55 316/95 204/MS Wodge wire scrcens are standard,
Other materials available upon request
Perforated screens are available,
> Standard body material is $S304/5S3 16/NCB/M.S. Other
‘materials are available upon request.
> Drain and differential pressure connections are standard.
> 150 AF Flanged connections are standard, 300% and
600i flanges are available
‘Self Cleaning
> Self cleaning of the Style T & 70 strainers is
accomplishedidepending upan erientation) by either
‘opening the valve or drain plug connected to the blow off
port or remaving the caver and pulling out the basket.
Baskets
(> Standard baskets are 4° perforated 30% stainless stecl
{approximately Gmesh) and are spat welded for maximum
strength
> Different size perforations and meshes are avaiable in
stainless steel, monel, and brass to meet specific meds
requirements
‘wururfegroupsinStrainers
ele) (geen tect g
Applications
Stearn, water, ol or gas where protection fram foreign
matter ina pipelinels required.
Construction
® The FMC Style “Duplex” strainers are supplied with weld
‘neck flange or tip on flangeand also Buttweld
connections
»
Ring Type Joint connections are also avadable; for ring type
joint specify ring number and style
lox ‘Style strainers are suitable for either horizontal
ing
Special dimensions are available. For additional pressure
classes flanges. and materials of construction {Low Carbon
Steel, Alloy 20, Hastelioy C276,Monal, and Duplex
Stainioss Steel)
Baskets
> Baskets are perforated 304/316/3161 stainless steal and
are spot welded for maximum
strength. Different size perforations and meshes are
available in stainless steel, monel, meet specific media
Foquirements. if media ts not indicated, }° perforated 30%
stainless steel baskets will be supplied
Design Features
>
‘Standard Sires from 2*to 00"
55 316/55 304/MS Wedge wire screens are standard
Other materials available upon request
Perforated screens ane avaitable
‘Standard body materia! is SS304/SS3 1G/ANCE/MS. Other
materials are available upon request.
(> Drain and differential pressure connections are standard.
> 1508 RF Flanged connections are standard. 300% and
600 flanges are avalabie
‘Cleaning
> Cleaning ofthe Style FB strainer ts accomplished by
‘removing the cover and pulling out the basket;
‘Strainer information Section for
ewrfmegroupsinStrainers
Temporary Strainer
Applications
Stearn, water, ol or gas where protection from forwign matter
ina pipeline is required. These strainers are installed between
Ranges for inexpensive protection of mechanical equipment.
Construction
> The FMC Style Cone/Basket/Plate strainers are available
In-carbon steel stainiess steel, and other alloys
> Screens are available perforated. mesh oF mesh lined to
meet specific mediarequiremerts.
‘Standard Screens.
* Ren ET Reames
When Ordering Specify
> Style
> Perforation or Mesh Size
‘> Specify direction of flow
Cone Strainer Basket Strainer Plate Strainer
‘wwwsimegroupsinStrainers
te aliel ene
WORKING
> FMC las developed a self-cleaning fiter, designed to handle
large flows, higher pressures & heauy dit loads. i cleans itself
automatically ether by sensing pressure drop across. the
fiter;r by timer, whichever occurs earlier, DIT collected 's
sjected out autarnatically with litle Mid
» Shell of the fiter js fabricated in S-& Is designed to handle
working pressure of filter. Filter elements are S300
wedge-wire screen candles, mounted vertically with their
bottom ends open to dirty fluid & top ends closed.
» All candies are exposed to flaw of dirty fluid, except one, Dirt is
collected inside the candles.
> One of the candie’s outiet bs opened to backwash port by
aligning rotary face seal to itBackwash outlet valve is opened
fora short time so that the dirt collected in this candle is let out
to atmosphere pressure. Since large pressure differentials
avaiable between working pressure of filter & atmosphere,
baclowashing is wery effective.
When the preset pressure drop reaches (or time elapsed is
complete), the rotary face seal is allgned with next candle outiet
8 backwash outlet valve is opened for a short time to effect
backwashing of that candle.
> The process is repeated automatically to keep the filter clean &
to eject the dirt. A recovery filter is provided to recover fiuid
ejected along with the dit.
> Wedge-wire screen openings, number of working candies,
candie sizes can be altered depending on following: Flow &
viscosity of fluid, quantity & type of dirt ett. The flter housing
can be designed to handle required working pressure,
> Fittor prosently developed has @ candles, 1000 mm long X.100
mmm dameter It s designed fo flow of 8000 LPM (480 m3}
of water based emulsion fr filtration level of 100 microns. tis
going to work as Roll Coolant Filter for a steel cold rolling rll.
‘wwwsimegroupsinSEB EES ==
IV
=lusters wh;
23 sembcorp fa Ss PIC |
£ P& SF We feuinnts 5) Zuari Coment
=) a z ——e