Vehicle safety is an important part of everyday life.
You must be qualified and authorized by your company to operate any vehicle at your jobsite. You must obey all rules and regulations at the job site as they may differ from site to site Remember your seat belt must be worn at all times you are operating the vehicle. Never sit on the tail gate or sides of the truck bed (check the job site if it is even allowed to have passengers siting in the truck bed) All company vehicles shall be inspected prior to use before every shift. Your safety inspection of the vehicle should include o Brakes, brake fluid, oil, gas, headlights, brake lights, turn signals, emergency lights, license plate light, windshield wipers, all mirrors, horn, seat belt, tires, emergency equipment (if provided). You must stop at all railroad crossings You must yield to pedestrians Pay attention to any restricted access areas When at the job site if you leave your vehicle unattended you must o Turn off the vehicle o Leave the keys in the ignition Vehicle Safety Points February 28, 2018
o And set the parking brake
You should perform a “circle of safety” prior to moving the vehicle where you circle the vehicle to ensure there are no obstructions You will want to use a spotter inside of units and heavy congested areas. While driving adhere to posted speed limits and never use a cell or radio while driving. When transporting employees inside the vehicle, there should be an adequate amount of seats.