Professional Documents
Culture Documents
Specifications:
Made for 20’, 30’ and 40’ containers.
For 20’ liner: 2400 x 2400 x5900 mm
Material:
Co-extruded 3-layer Polyethylene (PE)
150-200 microns (6-8 mil), FDA approved
Reinforcement bulkhead Polypropylene (PP) coated.
Loading:
Unloading:
Connect discharge tube with Caretex patented discharge spout. Connect flexible hose and tilt the container. Trans-
fer of bulk products to silo is done by using gravity/air, pump or pneumatic system. Use the liners’ air bag facility
when the pellets/resins are no longer free flowing out of discharge spout to easily remove the residual product re-
maining at the bulkhead corners. This is done WITHOUT the operators manual intervention, thus eliminating any
risk of material contamination.
Caretex discharge spout and inflatable liner airbag system are both patented and together constitutes a true closed
contamination and dust free discharge system.
For safety reasons, this liner has been designed enabling unloading with one container door closed during the entire
unloading process.
Retention of bulkhead:
This liner shall be used in connection with 5 steel bars mounted in fixation straps at the container door opening
(bulkhead).