Professional Documents
Culture Documents
Pyramid Car Audio Car Amplifier PB 1200
Pyramid Car Audio Car Amplifier PB 1200
PB 1000
PB 1100
PB 1500
PB 2600
PB 1200
PB 1700
PB 2200
PB 2700
power LED
pb 7 0 0
protection LED
pb 1 0 0 0 Remote Bass Boost
pb 1 1 0 0
pb 1 5 0 0 high pass frequency control
pb 2600
low pass frequency control
bass boost level
high level inputs
low level inputs
5
crossover mode selector input level control
power fuse
low pass frequency control when the crossover selector switch is in “low pass” mode, this control input impedance
sets the upper frequency limit for audio program sent to the speakers. low level inputs 10K Ohms
high level inputs 100 Ohms
high pass frequency control when the crossover selector switch is in “high pass” mode, this control
sets the lower frequency limit for audio program sent to the speakers.
Remote Bass Boost Plug in the Remote Bass Boost Control wire in here.
input sensitivity
low level inputs 250mV 6
high level inputs 2.5V
bass boost level control this control permits adjustment of the bass level up to an increase of
approximately 18 dB.
power supply voltage 14.4V DC Neg. Ground (10.5-16V)
low level inputs this amp features gold-plated RCA input jacks for high impedance input.
Use these with car stereo output which uses RCA-type connector cables. matching speaker impedance
high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker stereo mode 2-4 Ohms
output leads to these input connectors. bridged mode 4-8 Ohms
power LED this indicator is illuminated when power is applied. maximum current draw 15A 15A 15A
protection LED this indicator is illuminated when built-in protection circuitry is activated. dimensions (W x H x L)
power fuse the fuse protects the amplifier and your car’s electrical system from short mm 271 x 60 x 175 271 x 60 x 190 271 x 60 x 210
circuit conditions. inches 10.7 x 2.4 x 6.9 10.7 x 2.4 x 7.5 10.7 x 2.4 x 8.3
power terminals use these connectors to deliver power, ground and remote turn-on control
to the amplifier.
speaker connections these terminals are 14K gold plated to guarantee high conductivity and
minimum signal loss.
low level inputs this amp features gold-plated RCA input jacks for high impedance input.
matching speaker impedance
Use these with car stereo output which uses RCA-type connector cables. stereo mode 2-4 Ohms
bridged mode 4-8 Ohms
high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker
output leads to these input connectors.
maximum current draw 20 A 30 A
power LED this indicator is illuminated when power is applied.
dimensions (W x H x L)
protection LED this indicator is illuminated when built-in protection circuitry is activated. mm 271 x 60 x 250 271 x 60 x 300
power fuse the fuse protects the amplifier and your car’s electrical system from short inches 10.7 x 2.4 x 9.8 10.7 x 2.4 x 11.8
circuit conditions.
power terminals use these connectors to deliver power, ground and remote turn-on control
to the amplifier.
speaker connections these terminals are 14K gold plated to guarantee high conductivity and
minimum signal loss.
pb 1700
pb 2200
ch 3/4 low level inputs
ch 1/2 low level inputs
pb 2700 ch 3/4 crossover mode selector switch
ch 1/2 crossover mode selector switch
ch 3/4 bass boost level control
ch 3/4 low pass frequency control
ch 3/4 high pass frequency control
ch 1/2 bass boost level control
ch 1/2 low pass frequency control
ch 1/2 high pass frequency control
8
protection LED
power LED
power fuse
10
pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0
pb 1 5 0 0
pb 2600 11
12V battery
head unit
to remote turn-on
+12V
pb 1200
pb 1700
pb 2200
pb 2700
12
12V battery
head unit
to remote turn-on
+12V
pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0
head unit
pb 1 5 0 0
pb 2600
L/R Audio
Outputs 13
Y Adaptors
head unit
L L R R
pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0
head unit
pb 1 5 0 0
pb 2600 To a second amplifier 14
Y Adaptors
head unit
To a second amplifier
L L R R
wiring harness wiring harness
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700 L/R FRONT head unit
L/R REAR
Audio Outputs
15
Audio Outputs
Y adaptors L
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700
16
4 CH harness wiring for common ground connections
CH 3/4 CH 1/2
REAR L R L R FRONT
ORANGE ORANGE
BLACK BLACK REAR L R L R FRONT
BLACK BLACK
ORANGE ORANGE ORANGE ORANGE
from speaker terminals BLACK BLACK
PLEASE NOTE! If using high level inputs, BLACK BLACK
do not use the low level RCA inputs at the ORANGE ORANGE
same time!
from speaker terminals
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700 head unit
Y adaptors R
pb 1 2 0 0
pb 1 7 0 0
4 CH harness wiring
pb 2200 for common ground connections
pb 2700
18
R L
ORANGE ORANGE
BLACK BLACK
BLACK BLACK
ORANGE ORANGE
from speaker terminals
PLEASE NOTE! If using high level inputs, do
not use the low level RCA inputs at the same
time!
pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0
pb 1 5 0 0
pb 2600 19
Bridged Mono Output Mode
MINIMUM
SPEAKER
IMPEDANCE
4 OHMS!
speaker
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700
L R
20
FRONT speakers R L REAR speakers
MINIMUM
SPEAKER
IMPEDANCE
4 OHMS!
speakers
L R
MINIMUM
SPEAKER
R IMPEDANCE
L 4 OHMS!
SPEAKERS
SUBWOOFER
22
23
24