Report No.: 071220-238
MSDS_ Report
ACCREDITATION CERTIFICATE OF CHINA NATIONAL
ACCREDITATION BOARD FOR LABORATORIES (No.L0412)
Samples Sealing compound
Client Unit ‘TXY-Tech, Ine.
is 9894 Bis: at St. Suite 987,
@lient Adress. sonnet suite , Houston,
TX 77036, USA
Pony lab for physidal & c al analysis (Beijing) Co.Ltd
hitep:)/ew poniytest.gomMaterial Safety Data Sheet
Sealing compound
Section 1 - Chemical Product and Company Identification
Product name: TXyY-8# Sealing Compound
Chemical name : Sealing Compound
Manufaeture : TXY-Tech, Inc,
Address : 9894 Bissonnet St. Suite 987, Houston, TX 77036, USA.
Post cade : 77036
TEL: (001)281-822-8888
Emergency telephone : (001)510-220-5689
FAX + (001)281-822-9888
info@txy-tech.com
Section 2— Composition/Information on Ingredient
Chemical composition
Risk Phraese: None Listed.
Section 3 - Hazards Identification:
EMERGENCY OVERVIEW
Not available
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed thr
Eye Contact: May cause eye irritation
p the skin.
Page 2 0r6Inhalation: Material may be irritating to mucous membranes and upper respiratory
tract. May be harmful ifinhaled.
Ingestion: May be harmful if swallowed.
Section 4 - Fi
Aid Measures
Ingestion
Do NOT induce vomi
cupfuls of milk or water.
2. Lf conscious and alert, rinse mouth and drink 2-4
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids.
Skin
Flush skin with plenty of water forat least 15 minute while removing
contaminated clothing and shoes
Inhalation 2
Remove from exposure and mave to fresh air immediately 6
, SNES "
Section 5 - Fire Fighting Measures
General Information: s
ire, wear a sel Feontained brealhing apparatus in pressure-demand,
MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire,
irritating and highly toxic gases may be generated by thermal decomposition or
combustion.
Extinguishing Me
Specific Hazard(s):
Use agent most appropriate to extinguish fire,
-mits toxic fumes under fire conditions,
Section 6 - Accidental Release Measures
sneral Information:
e proper personal protective equipment as indicated in Section &
Spills/Leaks:
Clean up spills imme:
section, Sweep up, then pla
ving p:eeautions in the Protective Equipment
into a suitable container for disposal.
Section 7 - Handling and StorageHandling
Wash thoroughly after handling. Remove contaminated clothing and wash before
reuse, Avoid conlaet with eyes, skin, and clothing. Avoid ingestion and inhale
cool, dry place. Keep container closed when mot in use
Section 8 - Exposure Controls, Personal Protection
Engineering Controls:
Use adequate general or local exhaust ventilation to keep air borne
coneentrationsbelow the permissible exposure limits, Use process enclosure. local
exhaust ventilation, or other engineering controls te eontcol airborne levels
Personal Protective Equipment
Eyes: Wear safety glasses and chemical go
if splashing is possible,
Skin: Wear appropriate protective gloves and clothing to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin
Respirators: Wear a NIOSH/MSHA or European Standard EN 149 approved
full-facepiece airline respirator in the positive pressure mode wilh emergeney escape
provisions
Section 9 - Physical and Chemical Properties
Flash Point : NA
Density: 1.864 gicm3 ¢
Max Temperature :260°C
Max Pressure? 32.MPa
Solubility: Insoluble in water
Application : Sealing for equipment and pipes
Section 10 - Stability and Reactivity
Stability + Stable under normal temperatures and pressures.
Conditions to Avoid : incompatible materials, strong oxidants
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, irritat
and gases, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Ilas not been reported,
and toxie fumes
Page 406Section 11 - Toxicological Information
LDSO/LCS
Carcinogeni
classifiable)
Other:See actual entry in RTECS for complete information
DAS# 63148-62-9: 316484500 176485000 VL/6200000 VW 1511000
VX6390000
LDSO/LC30:— RILCS
CAS# 63148-62-9: Draize test, rabbit, eye: 100 ul 24H Mild:
Draize test, rabbit, eve: 100 mg/IH Mild;
Draize te 100 ul/24H Moderat
Draize n: 500 ul 24H Mild;
Oral, rat: LDS0 = >24 em/ke:
Oral, rat: LD50 = >17 gm/kg;
Skin, rabbit: LD50 = >2 emvky
Careinogenicity: Silicone oil, for melting point and boiling point apparatuses ~
Not listed as a carcinogen by ACGIH, IARC, NTP. or CA Prop 65.
Other:See actual entry in RTECS for complete information. The toxicological
properties have not teen fully investigated
POLY(TETRAPLUOROFTHYLENE) - IARC: Group 3 (not
Section 12 - Ecological Information
Environmental data : N/A f
Section 13 - Disposal Considerations
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - Transport Information
Not regulated
i regulatedSection 15 - Regulatory Information
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols:Not available
Risk Phrases:
Safety Phrases: $ 24/25 Avoid contaet with skin and
WGK (Water Danger’Protection): CAS# 9002-84-0: 0
Canada: CAS# 9002-84-0 is listed on Canada’s DSL List
US Federal
TSCA: CAS# 9002-84-0 is listed on the TSCA Inventory
Section 16 - Additional Information
is based on the data of which we are aware and is believed!
The abow format:
to be correct as of the data hereof. Since this iniormation may be applied under
conditions beyond our control and with which may be unfamiliar anc! since data made
available subsequent to the data hereof may suggest modifications of the information,
‘we do not assume any responsibility for the results of its use, This information is
furnished upon condition that the person receiving it shall make his own
determination of the suitability of the material for his partic
lar purpose.
MSDS Creation Date: December 20,2007
Page 6 or