SWENN wc.
1901, 60th Place
sulte L 7288
Bradenton, FL 34203,
1) 961 331 2931
Fax : (1) 961 827-9337
E-mail: Info@swennne.com
SCREW CAPS ‘Website: www swena-ine.com
“§WENN’” Screw Caps are made of low density Polyethylene with UV additives to
give a life expectancy between 3 to 5 years.
“SWENN? Serew Caps can withstand a temperature up f0 70°C.
‘TECHNICAL DATA
[Typical Physical Properties
TYPICAL VALUE | ASTM METHOD
RESIN PROPERTIES UNIT (a) (b)
Melt Index 9/10 min 2 i238,
| Density glcm® 0.922. 1505,
‘Crystallization Point °c 95 1525
FILM PROPERTIES (c)
Tensile Strength at Break
MDITD. kglom? 2701220 0882
Uliimate Elongation MOTD |__—% 310/580 D882
41% Secant Modulus MD/TD kglem® 2100 / 2300 D882
Elmendort Tear Strength MD/TD | —_aum 6/4 i922
{ Dart Drop Impact ium 2 1709
Haze % 7 1003
Gloss 60" angle % 40 2457
Notes:
(a) Values shown are typical and are not to be considered as specifications.
(b) ASTM test methods are latest under Society's current procedures.
(c) Film properties are typical blown film of 30 microns extruded at 2.5:1 BUR
Processing conditions:
160°C
Melt Temperature 180°C
BUR 2.5:
Alfred M.. Newton
‘Technical Manager