More than 40% of all drilling hazard relate to wellbore pressure.
MPD present a highly
effective means to mitigating drilling hazard (such as kick and fluid loss), maximize drilling efficiency, and make otherwise undrillable wells drillable. Conventional subsea BOP control systems use a two-POD design, providing a single spare if the primary control POD becomes unavailable. The Mark IV-HA control system system’s third POD provides additional redundancy, which eliminates the need to pull the stack if one POD fails. So that will improve POD reliability. Working on offshore oil rig is a hazardous job even under the best conditions. So Parviz overall have this to prevent that accident. And we want to highlight some equipment. RFID system is being used mainly as an asset management tool that provides efficiency management and control over assets in different application spaces. Some functions of RFID in safety and security is worker tracking. Free-fall lifeboat that can accommodate 95 people on board. SART contained in the boat will be activated and that enables a liferaft to be displayed on a search vessel's radar screen. The SART operates by receiving a pulse from the search radar and sending back a series of pulses in response. If the power goes wrong, to help worker to safe place, a glowing sign can be used for up to 10 hours at temperatures of minus 30 to 175 degrees celsius. To prevent oil spread and damaging the environment, Parviz use oil spill containment boom that help to concentrate oil in thicker surface layers so that skimmers, can be used more effectively. To break or change the direction of iceberg Parviz use water cannon. This water cannon uses sea water that is sprayed at the base of the iceberg.