HOW MUCH PER TIRE?
a MOTORCYCLE | 802. (237 ML)
ss WHEELBARROW | 8 02. (237 ml)
Gaim "Fr CAR/TRAILER | 16 07. (473 ml)
eying Gy TRUCK/SUV 20 07. (592 ml)
i, GOLF CART 20 oz. (592 ml)
wae wR ATV/MOWER | 2402. (TIO mL)
APPLICATION FORMULA FOR ALL TIRES
USE FOR THE SIZES NOT LISTED IN THE ABOVE APPLICATION CHART
bx{
For low speed tires
(Under 45mph/72kph)
X" x Y" x 0.12 = OZ. REQUIRED
X(CM) x ¥(CM) x 0.55 = mL REQUIRED
For high speed tires
(Over 45mph/72kph)
| X"xY"x 0.065 = OZ. REQUIRED
X(CM) x ¥(CM) x 0.30 = mL REQUIRED
*PRIME THE PUMP: Fill the pump’s flex tube
with sealant by depressing the pump handle
until flex tube is full. Attach flex tube to valve
stem, then pump the recommended amount of
sealant into the tire.
NOTE: One full depression of the pump dispenses
approximately 1 ounce (30 ml) of sealant.
HOW DO | INSTALL SLIME?
‘Position valve core 2, Slowly remove valve
inupperhalfooftie. core with tool in cap.
3. Allow tire to ‘4-Remove object
fully deflate. (if possible)
s.Attachhose and 6,Replace valve core,
install sealant"
(0.2 MI/0.32 KM
Over
inflate tire, 8. Drive, Stop. Verify seal
and check pressure.