‘TABLES FOR THE GENERAL DESIGN AND SPECIFICATIONS OF MATERIALS 239
Table 2-3
Applicable ASTM Specifications
for Various Structural Shapes
FpMin.| F, ‘Applicable Shape Seves
{held | tensile Ts
Steet | asta | stress | siress* | TE
Type | Designation | (ksi) | (si) mc | L Rect.) 2 | Pipe
7196, 36_| sear
360 | 35
we |
ceatan | 9500 2
ac
0
7507 EY
aw |
X
eTocs [86
oa | ae
cso | 20
sre [ors] 55
car | 60
High car | 65
Stength cian] ao | 708 F
ore! =
tow on | 50 | 65 if
a so | oo | oot Foe
eo | oo | 75 fare
1919
| 65 | 0 fay as
70 [70 [0
EH 9925088" [6st : Tal
conan |) fee
Resistant | A242 wet | om feed
vine | so_|_ 70) _pieaeaTeaE
stem | ise 970 Tpit
Mey | a7 #0 | 7 SHE
Hy Prteed materi spceaton
Cie applicable material speciation, th raat of hich shoul be conte pro spcfeaton
| = Material specication des rot apy.
= Winimum unessa range is shown,
Fer shapes ovr 426 tony the minimum of 58 ksi apes,
Fox shapes with flange thickness less than or equal to 17 ony. To improve weldabity & maximum carbon equlvalet can be spect
(per ASTM Supplementary Recurement S78). desired, maximum tensile tess of 90 ks can be spud (per ASTM Supplementary
Requirement S70)
‘1 cesired, maximum testes of 70 ks can be specified (oe ASTM Supplementary Requirement S81).
For shapes with aang thickness less than or equal 02 in, ony.
ASTM AB1B can ao be spected as coresion-resistant see AST A616.
2 Minimum apps fo walls rominaly 34-n. tick and under Fr wal thicknesses ever % in, F = 46 kl and F, = 67 ka
"cess, maximum yield stress of 65 ksi and maximum il-to-tensile strength rat of 0.85 can be spectid (ger ASTM Supplementary
Requirement $75)
| maximum yeé-o-ersile strength rato of 0.85 and carbon equivalent forma are included as mandatory in ASTM A882.
For shapes with a flange thickness greater than 2in,ony.
* For shapes with a lange thickness greater than 1 in and les than r equal to 2 in. ony.
"For shapes with a flange thickness lass than or equa to 114 in ony.
AMERICAN INSTITUTE OF STEEL, CONSTRUCTION, INC.