Professional Documents
Culture Documents
Marketplace
A
METEK Dixson’s 500 Series speedometers and tacho-
meters are precision instruments specially engineered to
withstand the heavy shock and vibration of off-road op-
erating environments. They feature corrosion-resistant hous-
ings and mount into a 33/8-inch panel cutout. These instruments
have glass lenses with splash-proof front seals, high-visibility or-
ange pointers, and easy-to-read dials. The speedometer has an
external speedometer adjustment and external odometer cali-
bration switches. The tachometer has external calibration
switches.
Choose from striped, black, or chrome bezels; orange or white
pointers; English or metric dials; and 12- or 24-volt operation.
These quality instruments accept either magnetic sensor or
sender-generator inputs and are available with or without dial
subscales.
The odometers read up to one million miles, and an optional
100-MPH version speedometer is available. Tachometers are
available in ranges from 2,400 to 4,000 RPM, with or without
an optional 10,000-hour hourmeter. Custom dial graphics are
available to meet your particular application.
071-40274
Specifications
PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS
Bezel: Black aluminum standard, others available Operating voltage: +12 or +24 VDC (specified at time of order)
Case: Corrosion-resistant steel Odometer: 7-digit, 999,999.9 before roll-over
Lens: Glass with splash-proof front seal Optional Hourmeter: 4-digit, 9,999 before roll-over
Panel cutout: SAE 3 3/8 -inch diameter hole Start protection: 12-volt input: withstands 24 VDC external jump-start
for 10 minutes; 24-volt input: withstands 36 VDC
Pointer: Orange or white external jump-start for 10 minutes
Speedometer Dial: 0 to 80 MPH standard (0 to 100 MPH optional), white/- Input signal: Varies according to input type (magnetic or sender
amber standard, other dials available generator
Tachometer Dial: 3,000 RPM standard (2,400 and 4,000 RPM optional)
ACCURACY
ENVIRONMENTAL CHARACTERISTICS (Operating and Storage) All instruments meet or exceed the accuracy specifications set forth
Temperature and humidity: Meets or exceeds SAE #J1455-1994-08 in SAE #J1226-1983-02.
Shock and vibration: Meets or exceeds SAE #J1455-1994-08