/Each process runs in its own protected memory space,
/The RE handles all protocol processes in addition to other software processes
that control the device’s interfaces, the chassis components, system management, and user access to the device. / Using this local copy of the forwarding table also allows platforms running the Junos OS to continue forwarding traffic during control plane instabilities. /// PFE include policers that provide rate limiting, stateless firewall filters, and class of service (CoS > operational mode # configuraton mode The help reference command displays summary information for the referenced configuration statement. The help topic command displays usage guidelines for the statement. Active Configuration ===startup configuration Candidate Configuration ============ runnning Exclusive Configuration-------allow only a single user to edit the configuration.Uncommitted changes are always discarded configure private commit synchronize0 show | compare displays the differences between the candidate configuration and the active configuration, also known as rollback 0 and-quit option, as shown, to return to operational mode rename command is an excellent way to correct addressing mistakes. To quickly verify the state of an interface you can issue the show interfaces terse command. . Issue the operational mode set date ntp address command a The messages log is the primary syslog file, and is stored in /var/log directory. Use the show log messages command to view the messages log Use the CLI monitor interface or monitor interface traffic commands to view interface usage in real time. Use the CLI monitor traffic interface command to perform a packet capture.