Professional Documents
Culture Documents
Search...
1. You need to allow HTTP access to www.mikrotik.com for all HotSpot users without authorization. What should you use?
2. What is the correct sequence of parameters, when adding routes in "/ppp secret"
A. [network] [metric]
3. What is the meaning of letter "R" on an active session in the menu PPP Active Connections?
A. Remote
B. Radius
C. Running
4. Which protocol(s) and port(s) needs to be opened in a firewall setup for an IPSec ESP tunnel to be established and for traffic to flow?
B. IP protocol 51
6. Router C gets its public IP address and default route through a PPPoE tunnel with Router B.
Router A has a L2TP VPN Tunnel between its public IP Address and the public IP address of Router C.
What is the Maximum MTU that can be configured on the L2TP Tunnel? So that no packet fragmentation will occur due to Encapsulation
overhead?
A. 1400 bytes
B. 1600 bytes
C. 1436 bytes
D. 1448 bytes
E. 1488 bytes
F. 1452 bytes
G. 1460 bytes
H. 1420 bytes
I. 1500 bytes
https://mikrotik.com/client/training&training_id=39667&training=certification&participant=528274&start_test=1&code=78d95e41eb 1/4
11/28/2019 MikroTik Routers and Wireless
7. There are 23 HotSpot users and 14 PPPoE users in your network, you want to manage them by User Manager. Which RouterOS level should be
on the router for the number of users?
B. 4
C. 3
D. 5
00:00:16
8. When using MikroTik-Group attribute on RADIUS/User Manager server, which attributes for the users can be specified:
last save: 2019-11-28 09:11:46
9. What configuration is added by /ip hotspot setup command? (select all that apply)
A. /queue tree
B. /ip dhcp-server
D. /ip service
10. Choose the best option to offer hotspot access to a known wireless client without HotSpot authentication
11. What is the maximum size of a packet that is able to cross an L2TP tunnel, that runs over a PPPoE tunnel with MLPPP enabled?
A. Same as MRRU
B. 1452 bytes
C. 1480 bytes
D. 1500 bytes
E. 1440 bytes
F. Same as MTU
12. Setting /radius incoming set accept=yes will allow your router to act as radius proxy, and accept incoming Authorization queries from other
routers
true
13. You have selected service ppp in /radius configuration to authenticate using User Manager.
A. L2TP
B. RouterOS users
C. PPP
D. Hotspot
E. Wireless
F. PPPoE
G. PPTP
14. What has to be configured to allow multiple logins for same hotspot user from different hosts?
https://mikrotik.com/client/training&training_id=39667&training=certification&participant=528274&start_test=1&code=78d95e41eb 2/4
11/28/2019 MikroTik Routers and Wireless
15. To customise the look of the hotspot login page, you can edit
A. alogin.html
B. template.html
C. login.html 00:00:16
D. redirect.html last save: 2019-11-28 09:11:46
16. How can mangle rules be applied to dynamically created PPTP client interfaces (select all that apply):
A. By enabling the 'PPTP Use Firewall' setting in the associated PPP Profile
17. Which menu is used for configuration to share the same HotSpot user and password for different computers at the same time?
A. PPTP clients
B. Router users
C. IPsec clients
D. PPP clients
E. L2TP clients
F. PPPoE clients
19. Select which of the following can be managed by the User Manager:
D. PPP authentication
20. Multiple PPPoE servers are installed in your network. You want to support central user management by using MikroTik User Manager. Select
the most appropriate answers.
B. You have to install the User Manager package on all PPPoE servers
C. The User Manager server does not have to reach all PPPoE servers
21. You want to skip HotSpot (authorization, accounting, etc.) for a specific host. What should you use?
D. /ip address
22. You need to open SSH service on HotSpot server for unauthorized users. Which rule do you need to configure ?
https://mikrotik.com/client/training&training_id=39667&training=certification&participant=528274&start_test=1&code=78d95e41eb 3/4
11/28/2019 MikroTik Routers and Wireless
C. /ip firewall filter add action=accept chain=hs-unauth dst-port=22 protocol=tcp , /ip firewall filter add
action=accept chain=hs-uanuth-to src-port=22 protocol=tcp
23. Select true statements from the following statements about IPsec:
D. Standard DES encryption algorithm is cryptographically weak and should not be deployed anymore
F. IPsec AH provides no encryption facility for data, it only checks message integrity
24. HotSpot is installed with a single address-pool. You want to equalize the bandwidth between clients, dividing them in two groups (free users
and paying-users). Select the most appropriate answer.
A. It is possible by dynamic address list and marking connection/packets by this address-list. Appropriate PCQ
queues are created for both groups.
C. It is possible by using only half pool for one group, the half pool is sorted by mangle. Set appropriate queue
with wireless-default type.
https://mikrotik.com/client/training&training_id=39667&training=certification&participant=528274&start_test=1&code=78d95e41eb 4/4