Professional Documents
Culture Documents
You can download test logfile, cellfile and neighbors file - here
See video demo of basic functionalities here
Clicking on a cell will display cell information in cell table and draw lines for
neighbor relation. Click again on the same cell to hide neighbor cells lines.
How to load log online measurements log data from G-NetReport data:
1. Select operator MCC, MNC for which you want to load data.
2. Select other options:
- you can filter measurements based on TECH, LAC, NODE, CELLID, start and
end time
- check IN VIEW to filter measurements only in the viewed zone of the map
- select MAX SAMPLES to limit the number of loaded measurements.
Generally up to 20 000 measurements are handled ok
- if you have too many measurements you can use log reduction. Log
reduction factor reduces the number of visualized measurements. If
logreduction factor is 5 then every 5th measurement will be shown on map.
3. Press the button [Online Measurements] and wait till data is loaded. The
measurements information will be loaded and measurement point will be
dispalyed on the map.
Clicking on measurement points will display serving and neighbor lines and
you can see the measurement info in measurement point table.
You can change also thematic maps via drop down menu.
Due to database limitation only the measurements during last 2 weeks are
available.
You can use your own database using G-NetReport Pro for Android