Professional Documents
Culture Documents
Collection
USA Version
Woolly Lattice & Cable Trapeze Sweater
Please read all the instructions and the pattern carefully before starting to knit the design.
Use the close up and front cover images as an additional guide.
Level: Advanced
Needles
A pair of US11 (8mm/UK0) knitting needles
Stitch markers
Yarn needle to darn in ends
Gauge
12 sts and 16 rows =4”x4” measured over stockinette stitch using US11 (8mm/
UK0) needles and 3 strands of yarn held together.
Check your gauge - if less stitches or rows use smaller needles, if more use
larger needles.
IT IS ESSENTIAL TO WORK TO THE STATED GAUGE TO ENSURE SUCCESS.
Cable panel (worked over 36 sts)
www.dmc.com
© 2019 The DMC Corporation
86 Northfield Ave., Edison, NJ 08837
Row 1: K1, * (yo, sl 1-k1-psso) 3 times, k8 *; rep [12:14], k2tog. 84 [90:94] sts With WS of work facing, rejoin yarn to rem 12 sts.
from * to * once more, (yo, sl 1-k1-psso) 3 times, Row 25: Sl 1-k1-psso, k8 [11:13], sm, k5, yo, sl Next Row (WS): Bind off 2 sts at beg (neck edge),
k1. 1-k1-psso, k7, sm, work row 5 of cable panel, p to end. 10 sts
Row 2 and every foll WS row: P to end. sm, k7, k2tog, yo, k5, sm, k8 [11:13], k2tog. 82 Next Row: K3, k3tog, k to end. 8 sts
Row 3: K1, * (sl 1-k1-psso, yo) 3 times, k8 *; rep [88:92] sts Next Row: Bind off 2 sts, p to end. 6 sts
from * to * once more, (sl 1-k1-psso, yo) 3 times, Row 27: Sl 1-k1-psso, k7 [10:12], sm, k14, Next Row: K3, patt to end.
k1.. sm, work row 7 of cable panel, sm, k14, sm, k7 Next Row: P2tog, p to end. 5 sts
Row 5: K1, * (yo, sl 1-k1-psso) 3 times, C8F *; rep [10:12], k2tog. 80 [86:90] sts Next Row: K2, k3tog. 3 sts
from * to * once more, (yo, sl 1-k1-psso) 3 times, Row 29: Sl 1-k1-psso, k6 [9:11], sm, k4, yo, sl P 1 row.
k1. 1-k1-psso, k8, sm, work row 9 of cable panel, sm, Bind off.
Row 7: As row 3. k8, k2tog, yo, k4, sm, k6 [9:11], k2tog. 78 [84:88] SLEEVES (both alike)
Row 9: As row 1. sts NOTE: the cable panel is worked over the center
Row 11: As row 3. Row 31: Sl 1-k1-psso, k5 [8:10], sm, k14, sm, 22 sts. Work the 20 row cable panel but repeat
Row 13: As row 1. work row 11 of cable panel, sm, k14, sm, k5 from * to * once only.
Row 15: K1, * (sl 1-k1-psso, yo) 3 times, C8B * [8:10], k2tog. 76 [82:86] sts
Using US11 needles and 3 strands of yarn held
; rep from * to * once more, (sl 1-k1-psso, yo) 3 Row 33: Sl 1-k1-psso, k4 [7:9], sm, k3, yo, sl
together, cast on 26 [28:30] sts.
times, k1. 1-k1-psso, k9, sm, work row 13 of cable panel, sm,
Work 4 rows in st st, starting with a k row.
Row 17: As row 1. k9, k2tog, yo, k3, sm, k4 [7:9], k2tog. 74 [80:84]
Next Row (hem fold line): K1, * k2tog, yo; rep from
Row 19: As row 3. sts
* to last st, k1.
Row 20: P to end. Row 35: Sl 1-k1-psso, k3 [6:8], sm, k14, sm, work
Next Row: P to end.
These 20 rows form the cable panel and are row 15 of cable panel, sm, k14, sm, k3 [6:8],
repeated. k2tog. 72 [78:82] sts Commence cable panel and shaping
Row 37: Sl 1-k1-psso, k2 [5:7], sm, k2, yo, sl Row 1: K2 [3:4], place a stitch marker on needle,
NOTE: the sweater is worked using 3 strands of
1-k1-psso, k10, sm, work row 17 of cable panel, work row 1 of cable panel working from * to * once
yarn held together to make a thicker yarn. Always
sm, k10, k2tog, yo, k2, sm, k2 [5:7], k2tog. 70 only, place a stitch marker on needle, k2 [3:4].
ensure that the needle is inserted through all 3
[76:80] sts Markers divide cable panel and st st.
strands for each stitch.
Row 39: Sl 1-k1-psso, k1 [4:6], sm, k14, sm, work Row 2 and every foll WS row: P to end, slipping
BACK markers.
row 19 of cable panel, sm, k14, sm, k1 [4:6],
Using US11 needles and 3 strands of yarn held Cont to work cable panel as set AT THE SAME
k2tog. 68 [74:78] sts
together, cast on 106 [112:116] sts. TIME inc 1 st at each end of next and every foll 4th
Row 41: Sl 1-k1-psso, k0 [3:5], remove marker,
Work 4 rows in st st (1 row k, 1 row p) starting with row (bringing inc sts into st st) to 50 [54:58] sts.
k1, yo, sl 1-k1-psso, k11, sm, work row 1 of cable
a k row. Cont in patt without shaping until sleeve measures
panel, sm, k11, k2tog, yo, k1, remove marker, k0
Next Row (hem fold line): K1, * k2tog, yo; rep from 42cm (17in), ending with a WS row.
[3:5], k2tog. 66 [72:76] sts
* to last st, k1.
Row 43: Sl 1-k1-psso, k13 [16:18], sm, work row 3 Shape raglan
Next Row: P to end.
of cable panel, sm, k13 [16:18], k2tog. 64 [70:74] Keeping cable panel correct, bind off 2 sts at beg
Commence cable panel and eyelet shaping sts of next 2 rows. 46 [50:54] sts
Row 1: K21 [24:26], place a stitch marker on Row 45: Sl 1-k1-psso, k12 [15:17], sm, work row 5 Row 1: K3, k3tog, k to marker, sm, work cable
needle, k11, yo, sl 1-k1-psso, k1, place a stitch of cable panel, sm, k12 [15:17], k2tog. 62 [68:72] panel, sm, k to last 6 sts, sl 1-k2tog-psso, k3.
marker on needle, work row 1 of cable panel, place sts Row 2: P to end, slipping markers.
a stitch marker on needle, k1, k2tog, yo, k11, place Row 46: P to end, slipping markers. Row 3: K to marker, sm, work cable panel, sm, k
a stitch marker on needle, k21 [24:26]. Markers to end.
Shape raglan armholes
divide patt panels. Row 4: P to end, slipping markers.
Next Row: Bind off 2 [3:3] sts, k to marker, sm,
Row 2 and every foll WS row: P to end, slipping Keeping cable panel and eyelet panels correct as
work row 7 of cable panel, sm, k to end.
markers. far as possible and always working 3 sts in st st
Next Row: Bind off 2 [3:3] sts, p to end, slipping
Row 3: Sl 1-k1-psso, k19 [22:24], slip marker, at each end, rep rows 1 to 4 until 18 sts remain,
markers. 58 [62:66] sts **
k14, slip marker, work row 3 of cable panel, slip ending with row 2.
Row 1: K3, k3tog, k to marker, sm, work row 9 of
marker, k14, slip marker, k19 [22:24], k2tog. 104
cable panel, sm, k to last 6 sts, sl 1-k2tog-psso, k3. Shape top
[110:114] sts
Row 2: P to end, slipping markers. Next Row: Patt 5 sts, bind off 8 sts, patt to end.
Row 5: Sl 1-k1-psso, k18 [21:23], sm, k10, yo, sl
Row 3: K to marker, sm, work row 11 of cable Work each side separately.
1-k1-psso, k2, sm, work row 5 of cable panel, sm,
panel, sm, k to end. Next Row (WS): P to last 2 sts, p2tog. 4 sts
k2, k2tog, yo, k10, sm, k18 [21:23], k2tog. 102
Row 4: P to end, slipping markers. Next Row: K3tog, k1. 2 sts
[108:112] sts
Keeping cable and eyelet panels correct as far as P 1 row.
Row 7: Sl 1-k1-psso, k17 [20:22], sm, k14, sm,
possible and always working 3 sts in st st at each Bind off.
work row 7 of cable panel, sm, k14, sm, k17
end, rep rows 1 to 4 until 26 sts remain, ending With WS of work facing, rejoin yarn to rem 5 sts.
[20:22], k2tog. 100 [106:110] sts
with row 2. Next Row (WS): P2tog, p to end. 4 sts
Row 9: Sl 1-k1-psso, k16 [19:21], sm, k9, yo, sl
Bind off. Next Row: Sl 1-k2tog-psso, k1. 2 sts
1-k1-psso, k3, sm, work row 9 of cable panel,
FRONT P 1 row.
sm, k3, k2tog, yo, k9, sm, k16 [19:21], k2tog. 98
Work as given for Back to **. 58 [62:66] sts Bind off.
[104:108] sts
Row 11: Sl 1-k1-psso, k15 [18:20], sm, k14, sm, Row 1: K3, k3tog, k to marker, sm, work row 9 of FINISHING
work row 11 of cable panel, sm, k14, sm, k15 cable panel, sm, k to last 6 sts, sl 1-k2tog-psso, k3. Sew in all yarn ends neatly. Block or press the
[18:20], k2tog. 96 [102:106] sts Row 2: P to end, slipping markers. pieces according to instructions on ball band. Join
Row 13: Sl 1-k1-psso, k14 [17:19], sm, k8, yo, sl Row 3: K to marker, sm, work row 11 of cable front raglan seams. Join right back raglan seam.
1-k1-psso, k4, sm, work row 13 of cable panel, panel, sm, k to end. Collar
sm, k4, k2tog, yo, k8, sm, k14 [17:19], k2tog. 94 Row 4: P to end, slipping markers. With RS of work facing, using US11 needles and 3
[100:104] sts Keeping cable and eyelet panels correct as far as strands of yarn held together, pick up and k 14 sts
Row 15: Sl 1-k1-psso, k13 [16:18], sm, k14, sm, possible and always working 3 sts in st st at each around top of left sleeve, 7 sts down side of front
work row 15 of cable panel, sm, k14, sm, k13 end, rep rows 1 to 4 until 34 sts remain, ending neck, 10 sts across front neck, 7 sts up side of neck,
[16:18], k2tog. 92 [98:102] sts with row 2. 14 sts around top of right sleeve and 26 sts across
Row 17: Sl 1-k1-psso, k12 [15:17], sm, k7, yo, sl Shape front neck back neck. 78 sts
1-k1-psso, k5, sm, work row 17 of cable panel, Next Row: K3, patt 9 sts, bind off 10 sts, patt to last Next Row (WS): P2, * k2, p2; rep from * to end.
sm, k5, k2tog, yo, k7, sm, k12 [15:17], k2tog. 90 3 sts, k3. Next Row: K2, * p2, k2; rep from * to end.
[96:100] sts Work each side of the neck separately. Rep these 2 rows until collar measures 20cm (8in).
Row 19: Sl 1-k1-psso, k11 [14:16], sm, k14, sm, Next Row (WS): P to end. 12 sts Bind off in rib.
work row 19 of cable panel, sm, k14, sm, k11 Next Row: Bind off 2 sts at beg (neck edge), patt to Join back raglan seam. Join collar, reversing seam
[14:16], k2tog. 88 [94:98] sts last 6 sts, sl 1-k2tog-psso, k3. 8 sts for turn back. join side and sleeve seams. Fold
Row 21: Sl 1-k1-psso, k10 [13:15], sm, k6, yo, Next Row: P to end. hems on lower edge to the WS along eyelet row
sl 1-k1-psso, k6, sm, work row 1 of cable panel, Next Row: Bind off 2 sts, patt to last 3 sts, k3. 6 sts and slip stitch in place.
sm, k6, k2tog, yo, k6, sm, k10 [13:15], k2tog. 86 Next Row: Patt to last 2 sts, p2tog. 5 sts
[92:96] sts Next Row: Sl 1-k2tog, psso, k2. 3 sts
Row 23: Sl 1-k1-psso, k9 [12:14], sm, k14, P 1 row.
sm, work row 3 of cable panel, sm, k14, sm, k9 Bind off.
Level: Advanced Woolly Lattice & Cable Trapeze Sweater
To fit bust sizes: 91: 102: 107cm (36: 40: 42in)
15203L/2
www.dmc.com
© 2019 The DMC Corporation DMC Woolly (488) 100% wool.
86 Northfield Ave., Edison, NJ 08837 For age 16+. Please retain leaflet for future reference.