TIE SYSTEMS - COMPONENTS
Gees ncaa uc aur k Sucre}
MISCELLANEOUS TIE EQUIPMENT
M20
ANCHOR SCREWS
120mm x M20
Code: HTX20120 0.68kg
200mm x M20
Code: HTX20200 1,00kg
“8
zo Sie
0
~L® REaes
M24
ANCHOR SCREWS
200mm x M24
Code: HIX24200 1.00kg
280mm x N24
Code: HTX242801.25kg
ALL-THREADED ROD
Size ke Code
Mid TRA1O002 0.454g/m
Wi2_—TRKIO012 0.744g/m
Wi TRKIO0I6 1.254a/m
ene: cone FoR a PER TA AE
ALE
‘30m LENGTHS
ENDED ALL-THREAD ROD
This formation canforms to AS32610
IMD reserves the right to chang his infomation
DATE: 06 Feb 2011 TSSUENS: 6 PREPARED BY:
APPROVED:
TECHNICAL DATATIE SYSTEMS - DESIGN DAT. 7D 010
ecole Augean kao cus) Page 13
a
=
[s]
ANCHOR SCREWS, M20 & M24
The Anchor Screw is a reusable cast in anchor that is designed to transmit loads into previously cast,
conerete.
The WLL in tension is governed by the strength of the concrete at time of loading. The WLL's in
tension stated below are based on a concrete strength of 21mPa,
WLL in tension:
M20 x120mm Anchor Screw (HTX20120) WLL = 30kN
M20 x200mm Anchor Serew (HTX20200) WLL = 43kN
M24 x200mm Anchor Serew (HTX24200) WL = 43kN
M24 x280mm Anchor Screw (HTX24280) WLL = 80kN
‘The WLL in shear is generally dictated by the shear strength of the bolt that is used. It is,
recommended that the minimum strength bolt that is used is G8.8.
Bolt length to be assessed to ensure maximum thread engagement in Anchor Screws.
Note: M24 x5Smam G8.8 bolts shall be used with the $/SM Wall Shear Bracket SSALO175
Refer TDO2I - Climbing Formwork
‘The client shall ensure that the surrounding concrete is capable of safely withstanding all
loads.
Whilst we do not recommend it, Anchor Screws may be withdrawn and reinserted into the same
hole, Itis essential that these holes are clean to minimise any lack of fit that may occur. The
capacity of the Anchor Screw is not compromised in this situation,
Anchor Screws should always be coated with a suitable release agent or grease to facilitate their
release.
‘This information conlorms to AS3610 NID reserves the right to change this information.
DATE: 06 Fob 2011 ISSUENG: 6 PREPARED BY: OM, | APPROVED: Rots,
TECHNICAL DATA