Professional Documents
Culture Documents
Bell Gossett, Serie E-80, Familia de Bombas - B-119C-Series-e-80
Bell Gossett, Serie E-80, Familia de Bombas - B-119C-Series-e-80
Series e-80
IN-LINE MOUNTED CENTRIFUGAL PUMP
B-119C
The Series e-80 pump provides best-in-class hydraulic
performance and optimized efficiency.
2
Construction Materials - diagram and table
1 Shaft
Slinger
4 Shaft Sleeve 10 Seal Assembly
Anti-Vortex Baffles 5 Impeller Key
Integrated Variable 6 Impeller Washer Bracket Cover Plate
Flush Line
Speed Drives
9 Volute Gasket
Provide variable flow pumping for
Gauge Tapping Volute Cap
the broadest range of applications Screw
Gauge
with optional Bell & Gossett variable Tapping
speed drives. The Integrated
Technologic Sensorless Control drive
(ITSC) combines the energy savings
of variable flow with sensorless
3 Impeller
curve control to provide turn
7 Impeller Lock
down at low flow while eliminating
Washer
the cost and time of using wired 2 Volute
transducers and sensors. The
Support Ring
Integrated Technologic drive (IT) 8 Impeller Cap Screw
is another variable speed option
designed for building automation Standard Mechanical Seal
system control. It provides an energy
efficient and economical alternative
for applications that don’t require
sensorless control.
Construction Materials
(For parts in contact with fluid pumped)
3
Standard Performance Curves Engineering Specifications
Each pump is furnished and installed with
200 Series e-80 capacities as shown on the plans. It has an in-
1750 RPM line type, close-coupled single-stage design,
180 for installation in vertical or horizontal position,
and is capable of being serviced without
8x
6x
160
13
disturbing piping connections.
13
3x13.5
.5B
4x13.5 5x13.5
.5
140
Head (Feet)
3x
C
5x
60
2.5x9.5C
9.5
C
4x9.5B a ceramic seal seat and a carbon seal ring,
B
40 1.5x7C 8x9.5B suitable for continuous operation at 225°F.
3x7C 6x9.5B
2x7B 5x7B
20 7B 4x7B 7B
2.
5x 6x A stainless steel shaft sleeve completely covers
0
the wetted area under the seal.
10 100 1000
Flow (GPM)
The pump is rated for a minimum of 175 psi
working pressure (with optional 250 psi and
450 Series e-80
300 psi working pressures). The pump case has
3550 RPM gauge tappings at the suction and discharge
400 3x11B nozzles, and includes drain ports.
350
The motor meets NEMA specifications, size,
voltage and enclosure called for on the
1.5x9.5B
plans. It has heavy-duty, grease-lubricated
9.5C
300
5C
Head (Feet)
2.5x
250
maximum load for which the pump
3x9.5C
is designed.
200
Each pump is factory pressure tested per
1.5x7C
150 Hydraulic Institute standards. It is thoroughly
2x7B 3x7C 5x7B cleaned and painted with at least one coat
4x7B of high-grade machinery enamel prior
100
7B
to shipment.
B
x
6x7
2.5
50
Series e-80 pumps are manufactured by
0 Bell & Gossett, a Xylem, Inc. brand.
10 100 1000
Flow (GPM)
Xylem Inc.
Phone: (847) 966-3700
Fax: (847) 965-8379
www.xylem.com/bellgossett
Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries.
© 2019 Xylem Inc. B-119C September 2019