aa
Preparation of Tube
Co
Maximum height H for Straight tube end Minimum length for shor piece of tube
Series | tt Series L Series 'S Series:
Tube od. [4] 6] 8 | 6] 8 |10]12[15] 1822] 28]35]42| 6 | 8 | 10] 12] 16]20|25]30|38
Hmin |24|25[26] 31] 31]23) 33] 36[28|42| 2/0] 4a] 95|25) 97] 37|45[50] 54] 58|65)
Lain [3032] 38|39|59] 42|42|45]48]53]53] 60| 60] +4] 44] 47|47[54] 6358] 73] 82|
Saw off Tube at 90°
Do not use Tube cutters
oo
Tube cut with tube cutter
generates heavy burr/bevel cut
oe,
Saw off Tube
Deburr inside and Outside edges
of tube upto 0.2x45°Lubricate threads (Exteral and Internal), cone of the Coupling body and the Ferrule
Slip the Coupling Nut and Ferrule over tube endEnsure Coupling Nut and Ferrule are facing the right way
A Correct Incorrect
Screw the Coupling Nut Tighten the coupling Nut
manually on to Coupling body by spanner until the tube
until finger tight. stops rotating by hand
Mark the Coupling Nut and Tighten the Coupling Nut
holding device to measure the around 1 1/4 to 1 1/2 round
prescribed turns Tube must not rotateONT eee
Sectional View of Straight Coupling assembly with Tube
—,