Professional Documents
Culture Documents
1. The thread collar base holding the ends of the tubes, mounts
to the back of the tension assembly.
2. Secure the thread collar base using the four (4) screws.
1
3. Use the threading guide included in the toolkit.
4. Push the eye end of the guide, through the tube until it comes
out the back.
2
5. Drop the thread through the eye and pull threading guide back
out of the machine
3
Elite Pro Thread Stand Overview
4
Threading the Sewing Head
5
1. Pull thread from tube
6
Installing the Slide Barss
1. The Elite Pro’s cap slide bar mounts to a metal bracket. Mount
the metal bracket to the bottom of the arm with two (2) bolts.
2. Tighten the two (2) smaller set screws. These help align the
slide bar and hold firmly in place.
7
Overview of the Slide Bar
8
Machine Lubrication
C1 C2
E1
B1
E2
E1
C3 C5
C3
C4
E3
E3
C4 C4
B3
B2
B2
F1
B2
A1
9
Machine Lubrication Chart
PART ID LUBRICANT FREQUENCY
Drive Shaft B1
Barudan machine oil
Clear (mineral) oil for sewing
Hook Shaft machinery
B2 Once a week
Bushings (3)
*Wipe lightly with cotton swab
saturated in oil.
*Needle Bars B3
Needle Bar
C1
Crank Rod
Take-up Drive
C2
Lever
Needle Bar
C3
Drive Lever Bearing oil Once a week
Needle Bar
Drive Links C4
(3)
Needle Bar
C5
Driving Shaft
Take-Up
E1
Lever
Take-Up
Lever Cam E2 Lithium grease spray Every 3 months
Groove
Presser Foot
E3
Cams (2)
Lower
Connecting F1 Wheel bearing grease Every 6 months
Gear
10