Professional Documents
Culture Documents
Mechanical Seals
& Seal Supply Systems
Static Seals
Expansion Joints
Service
Magnetic Couplings
Radial Shaft Seals
Diaphragm Couplings
The stuffing box packing is without doubt an extremely Buraflon® Araflon® Chemstar®-L
reliable method of sealing your pumps, valves and fittings.
The materials that we use mean that a wide range of
5846 6435 6226/L
applications can be covered. Only Burgmann packings Ramie fibre packing with light- High quality smooth aramide Universal packing preferably for
have the benefit of the AK-profile braiding technology colored special PTFE packing with PTFE impregnation chemical applications. Made of
which guarantees optimum durability along with considerably impregnation to prevent product and lubricant. Due to extreme sintered, expanded PTFE
reduced leak rates. contamination. A flexible low wear resistance suited for filament yarns with PTFE
maintenance and easy-to-control abrasive media. A universal impregnation. Resistant to
packing. Resistant to abrasive packing for pumps and valves in compression and extrusion. High
Thermoflon®-SL media and sea water. all branches of industry, e.g.
paper, sewage, chemical and
structural and cross-sectional
strength. For valves (high
6230/SL For pumps, refiners, filters and petrochemical. pressure), plunger pumps,
valves in the food and agitators, mixers, kneaders (up
Graphite/PTFE compound pharmaceutical industry, marine Operating limits to 2 m/s dry running)
packing with lubricant. Very industry and others. Temp: –100 °C ... +280 °C
good thermal conductivity, highly Approvals
Approval Pressure: 15 bar (pumps),
flexible and stable. No slip-stick FMPA Stuttgart, Germany for
100 bar (valves)
effect. Resistant to a wide range FMPA Stuttgart, Germany for foodstuffs, BAM certificate for
of chemicals. Does not embrittle foodstuffs. pH: 1 – 13
gaseous oxygen up to 150 °C
or age. Universal application in and 40 bar, >150 °C to
all types of industry. Suitable for Operating limits
Isartherm®-Flex hot water up to 120 °C uncooled Temp: –50 °C ... +140 °C
200 °C and 30 bar.
pH:
500 bar (valves)
0 – 14
4003 foodstuff industry.
Density: 1.1 ... 1.2 g/cm3 Cotton packing with light colored Operating limits
special grease impregnation. A Temp: –200 °C ... +280 °C
preferred choice for clean Pressure: vacuum ... 15 bar
media. Pre-impregnated twisted
Isartherm®-Flex cotton yarns, intensively re-
pH: 0 – 14 (static),
0 – 12 (dynamic)
6050 KIN impregnated during braiding. An
economical packing.
Valve packing made of same
materials as Isartherm®-Flex Operation limits
but with additional Inconel® Temp: 100 °C
wire reinforcement and a Pressure: 10 bar (pumps),
corrosion inhibitor. Increased 60 bar (valves
pressure stability. Ideal for pH: 6–8
bridging large gaps or to apply Speed: 1,450 min–1
as a counter seal to prevent
extrusion of other packing types.
Approval
Fire safe according API 589
Operating limits
Same as Isartherm®-Flex,
specific weight approx. 17% More and detailed
greater. information on Packings:
www.eagleburgmann.com
The solution for flue gas ducts and piping systems
KE-Burgmann Expansion Joints EKK
Fabric and rubber expansion joints Metal expansion joints Diaphragm Couplings
Flex-Gen® Diaphragm
• Single or multi-layer
Coupling
• Application: for air or dry
flue gas EKK applied the special coupling
• Temperature: ... 575 °C originally developed for aircraft
gas turbines to general industrial
applications. This diaphragm
Bredan® coupling achieves high rigidity
KE-Masterflex rubber expansion
joints are available in two main Connex® for torsion and flexibility for
bending and compression due to
types: Application areas the special profile process,
D-types - high quality standard. • Liquids and gas enabling to transmit high torque.
Sphere moulded design. DN 20 • Temperature: The coupling has achieved a
Simple, yet durable and strong. ... DN 750 mm. –215 °C ... +1,100 °C maximum speed of 100,000 rpm
With unique thermal, chemical and a maximum torque of
and mechanical properties,
DFS-types - special customised. • Pressure: ... 70 bar
Handmade spool arch design. 2,700KN-m and is regarded
manufactured from our own DN 50 ... DN 2,400 mm. We use three manufacturing highly in many fields as the ideal
reinforced PTFE-based laminates. technologies coupling which features high
Materials: EPDM, Neoprene,
Roll forming speed, high load torque
Advantages Nitrile, Hypalon®, FKM
(DN 150 ... DN 1,200 mm) transmission, light in weight and
fluoroelastomers, Nitrile, Buthyl
• Exceptional flexibility and HT, other materials available on Elastomer forming no lubrication. In addition, with
strength: the fabric is lami- (DN 40 ... DN 150 mm) the flexible axial and angular
nated with PTFE on two sides request.
Fabric Expansion Joints Punch forming displacement capability (low
• Exceptional mechanical (DN 15 ... DN 5,000 mm) bearing load), the coupling is
Combine-X® resistance getting indispensable for
• Elimination of heat pockets All types of metal expansion turbines and compressors which
• Multi-layer • Excellent chemical resistance joints in all possible are getting higher in speed and
• Application: gas turbine and on all surfaces configurations can be supplied: larger in capacity, rotary
combined cycle plants • Gastight and non-permeable equipments in steel production
• Temperature: ... 700 °C • Round and rectangular, single machines, ships and aircraft.
or multi-layer, two-ply testable,
Especially designed for use in externally pressurised, PTFE
gas turbine and combined cycle lined, clamshells etc.
plants with high operating • Axial, lateral, angular,
temperatures, very high gas universal, pressure-balanced,
velocities and pulsating gas T-Max® inline pressure balanced,
flows. double expansion joints etc.
Special design options include
the T-MAX rubber expansion
• With corners as camera,
single mitre, double mitre or
joint with integrated PTFE lining, radius corners for rectangular
which covers all surfaces in the joints
Fluachem® arch and flange areas as well.
• With or without flanges, tie
Exceptional resistance to almost rods, hinges, gimbals, internal
• Single layer all chemicals within the sleeve, outside protective
• Application: aggressive media temperature range of the cover etc.
or wet condensate elastomeric body construction.
• Temperatures: up to 300 °C
Single layer expansion joints
based on (fluoro-)elastomers
and (fluoro-)polymers, specially
developed to withstand high
chemical loads. For use use in
More and detailed More and detailed
flue gas cleaning systems,
information on Expansion Joints: information on EKK products:
incineration plants and other
plants with very aggressive www.ke-burgmann.com www.ekk.co.jp/eng
media.
Burgmann Your Partner for Sealing Technology
Espey Seals Magnetic Couplings EagleBurgmann Worldwide
... for hermetically sealing
DIN/EN 729-2
HPO
Certified
KTA 1401
Certified for Nuclear
Power Plants
Quality
Management System
QS 9000
Engineering
Total Seal Care®– We draw up standardization
assisted with special software,
so maintenance costs can be
process engineers in the various
industrial sectors such as
A
te
the Burgmann Service concepts for you, aimed at continuously assessed and refineries, chemicals, power ra
reducing the number of variants reduced. stations, paper and valve tech- e
made to measure you have among your seals. nology. In
Storage management
Their design and function make mechanical seals Technical improvements and p
We offer you optimized, cost- Modular service concept
technically high-quality and sophisticated products, and conversion proposals, especially in
for bad actors, are just as much effective storage management. We first carry out an analysis of re
they require an equally high degree of service quality in
essential components of our Direct storage at your plant or at all installed seals to gain a
order to ensure perfect operation. However, service from
engineering services concept as the nearest service facility picture of the current situation in O
your point of view as customer is no longer merely a
the attentive processing of assures you of fast access to terms of population, condition, e
matter of repairing your seals, and today you expect a
critical applications. spare parts and complete seals. variety, functioning and m
comprehensive package of services instead. We at
operational requirements. We h
EagleBurgmann can provide you with a concept that is Maintenance Seminars and training then use this analysis as the w
customtailored to your specific needs and requirements. courses
Repairs, maintenance and basis for offering you a ir
conversion work on seal systems Under the motto „Practical standardization concept, aimed p
are performed on the spot or at training for practical applica- at minimizing the number of a
service facilities near your tion“, our seminars and training different systems, sizes and o
premises by qualified engineers courses are designed to provide materials, analysis of bad actors th
and fitters. The recording and specifically orientated further and critical applications while a
documenting of your seal’s and advanced training for your taking account of the relevant s
functional data is computer- maintenance and service technical regulations and plant-
specific requirements.
... for special applications Standard cartridge seals
A computer-assisted main-
tenance concept subsequently
raises seal service life and cuts
error and failure rates.
Splitex® Mtex®
The splitting one The multitalent
In conjunction with corres-
pondingly trained personnel this Splitex®, the fully split cartridge Mtex®, the multitalent among
in turn makes for significantly seal in the size of a flange. cartridge seals: Metal bellows
reduced maintenance costs. There´s no easier or faster technology tried-and-tested in
approach when time really does service with a wide range of
Our seals can be relied upon to mean money. Suitable for pumps operating temperatures. State-
ensure that - even under the in applications such as water, of-the-art sealing technology,
most difficult conditions - waste wter, pulp and paper, also available in a gaslubricated
hazardous substances remain mining and shipping. version.
where they are supposed to,
irrespective of whether in Operating limits Operating limits
pumps, compressors or d1 = 50 ... 150 mm d1 = 25 ... 100 mm
agitators, or in sewage systems, t = ... 150 °C t = –40 °C ... +250 (280) °C
or in applications and systems in vg = 10 m/s vg = 15 m/s
the chemical, petroleum, paper p1 = 6 ... 10 bar p1 = 25 bar
and sugar industries, or in power Axial movement: ±1.5 mm
stations.
Your contact
Agitator seals Compressor
Compressor seals
seals Supply systems
Burgmann Industries
GmbH & Co. KG
Äußere Sauerlacher Str. 6 –10
D–82515 Wolfratshausen
Germany
Tel. +49 / 8171/ 23 –0
Telefax +49 / 8171/ 23 –1214
The reliable and ideal Burgmann Compressor Seals Find all our locations under
solution for mixers, dryers, are gas-lubricated, operate
www.eagleburgmann.com/world
kneaders and reactors - for contact and wear-free.
top, bottom and side entry.
For application on carbon
steel, stainless steel and DGS
glass-lined vessels in
chemical, petrochemical and Cartridge seals for turbo
foodstuff industry as well as compressors.
refineries.
Operating limits: Burgmann TS 1016
high pressure up to 250 bar Metal bellows seal for single „Well supplied“
stage steam turbines for longer service life
and protection
AGS/AGSR Operating limits: of the environment
Gas-lubricated agitator seals. Shaft size: 20 ... 180 mm Burgmann seal supply systems –
Dry Gas Seals with unique Temperature: –50 °C ... +450 °C from the simple quench vessel to
Pressure: 25 bar Your local distributor:
groove technology for a stable the most sophisticated lubrication
gas film between the sliding Velocity: 130 m/s
system, tailored to your require-
faces even at low sliding ments. Depending on duty re-
velocities. CSR/CSE quirements, they cool or lubri-
cate, provide circulation, and
Carbon ring oil barrier seal for pressurise. They ensure more
Dry Gas Seals. Bidirectional reliable and durable operation of
segmented carbon rings in a mechanical seal and protect the
double arrangement with buffer environment.
gas pressurization. Available as
aerodynamic and aerostatic type.
UEBE / E4 / 5.000 / 05.07 / 3.2.1
Operating limits:
Shaft size: 25 ... 320 mm
Buffer gas pressure:
SeccoMix® dynamic 2.2 bar, static 11 bar
Temperature: –20 °C ... +200 °C More and detailed
Single cartridge seal for dry
Velocity: 200 m/s information
running applications. To seal all All technical specifications are based on extensive tests and our many years of
agitators where leakage is www.eagleburgmann.com experience. The diversity of possible applications means, however, that they can serve
only as guide values. We must be notified of the exact conditions of application before
allowed to the atmosphere. we can provide any guarantee for a specific case. Subject to change.