Professional Documents
Culture Documents
! Danger!
Hazardous voltage!
Hazardous spring pressure!
Before beginning work on the unit, switch it to a de-energized state
and secure it against reactivation. Work only with the circuit-breaker
switched off and the spring discharged.
Non-observation can result in death, severe personal injury or
substantial property damage.
Only qualified personnel may perform installation and assembly
work.
2
Step 1: Assembly of 3WL Guide Frame on the Mounting Base (1)
1) Tightening torque 20±2 Nm
3
Step 2b: Assembly of Adapter Terminals - Engage the terminals
4
Step 2c: Assembly of Adapter Terminals - add Supports
2) Tightening torque 80 Nm
3) Tightening torque 10 Nm
5
1) Tightening torque 20±Nm
2) Tightening torque 85 Nm
Step 2e: Remove the 3WE breaker along with its
quide frame and assemble Adapter Link to
the existing busbars
6
Door sealing frame IP40
Dimension drawing of door cutout
Frontview of the panel door
7
Siemens Ltd.
Automation and Drives Division
Thane Belapur Road
Kalwa
Thane - 400 601
Fax: +91 22 27600076
E-mail: AD.CDPM@kwa2.siemens.co.in