W PALADIN.
POWERFUL ATTACHMENT TOOLS:
OPERATOR’S MANUAL
STRIKE FORCE™ BREAKER
SFB1000, SFB1500, SFB2K, SFB3K, SFB4K,
BoE) a 215) Pos) get A= A
SERIAL NUMBER: ‘Manual Number: 51-4722
MODEL NUMBER:
TaeTABLE OF CONTENTS
PREFACE. Es
SAFETY PRECAUTIONS.
‘SAFETY STATEMENTS. .
(GENERAL SAFETY PRECAUTIONS.
EQUIPMENT SAFETY PRECAUTIONS
DECALS,
DECAL PLACEMENT 0
DECALS.
INSTALLATION.
INSTALLING / DETACHING FROM PRIME MOVER,
TOOL STYLE GUIDE
‘TOOL BIT INSTALLATION REMOVAL.
‘OPERATION
INTENDED USE MISUSE :
[ADJUSTING IMPACT RATE AND POWER.
[AUTO SHUT-OFF FUNCTION.
STORAGE,
LIFTPOINTS, TIE GOWN POINTS & TRANSPORTING,
MAINTENANCE & SERVICE
GENERAL MAINTENANCE
(GREASING THE ATTACHMENT
(CHARGING BACK HEAD,
(CHARGING ACCUMULATOR.
INSPECTION OF WEAR PARTS.
[ACCESSORY TOOLS.
‘TROUBLESHOOTING. -
SPECIFICATIONS
BOLT TORQUE SPECIFICATIONS,
BREAKER TORQUE SPECIFICATIONS
(GENERAL SPECIFICATIONS..
(GENERAL DIMENSIONS, :
FLOW TEST PROCEDURES. :
PARTS AND WARRANTY,
sire
74
9-10
a
2
19
14
8
1617
8
1920
2
23
26
25
728
1
52.58
3THIS PAGE IS
INTENTIONALLY
BLANK
sirPREFACE
GENERAL COMMENTS:
‘Congrtlatons onthe purchase of your new PALADIN produc! This product was caefy
‘desianed ad manufactured to give you many years of dependable sence. Only minor monance
(such as Gearing and luticatin) i requited to Ken itin top working cenditon. Be sure fo choo ll
‘mahtenance procedures ae safety precautions in his manual and onary safety decals located onthe
‘recut and on any equipment on which he sian mounted.
“This manual has been designed io help yu doa beter job, Rea this manual carefully
and bacome fara wth ts content
WARNING! Never let anyone operate this unit without reading the "Safety Precautions"
{and "Operating Instructions" sections ofthis manual.
Always choose hard, level ground to park the vehicle on and set the brake
‘s0the unit cannot rol,
Unies noted others, rit and let sides are determined fom the operator's conta poston
hon facing forward
NOTE: Theilstrations and data used inthis manual were curent (according tothe information
available ous) a the time of printing, howover, we reserve the right to redesign and change the
fattachment as may be necessary without notification.
BEFORE OPERATION
“The primary responstiy for Sfety vith his equpment fas othe operator. Make sur the
‘ecuipment operated onl by Waned indica that have read and undostand ts manual here
‘ary poion of this manual or function you donot understand, contact your local authorized dea ot
‘manufacurer Keep tis manual aval or eterenc. Provide ts mandalo any new owners ono
operators,
SAFETY ALERT SYMBOL
“This th “Safety Alert Symber used by hi indus. This symbol is usedo wam of
Possible nur. Bo sure ove all wemings carefully. They are nce fo" your safely
nd forthe sat f others working wih you
SERVICE
Use enly manciecturer eptscorrent pats, Subsite pats may ni
arts
‘Record the model and sel number f your wit onthe cover ofthis mara. The parts depart
‘ment needs tisinforaton to insure that you rele th correct pari
SOUND AND VIBRATION
‘Scund pressure lve and virion ata for his attachment ae nuanced by many diferent param:
ets; some tems ar ste below (nt inclusive}
* prime mover type, age conaton, wth without cab enclosure and congurtion
+ operator traning, behav and sess level
+b ste oganzatin, working marl conten an environment
‘Based on the unceiaity of tho prime mover, operate ana job site ke not posible ogo precise prime
‘mover and opersor sound prescure evel of vibration Inve fr his statment.
the oquted sian-
NOTE: A tat ofa Paladin Patents canbe found at htp:/w palainatachments competent asp.
sirA
SAFETY STATEMENTS
“THIS SYMBOL BY ITSELF OR WITH A WARNING WORD THROUGHOUT THs MAN-
UUALIS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR
PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE.
INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
AX DANGER Ths sionaL WoRDINDICATES A HAZARDOUS SITUATION WHICH, IF
[NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.
AXwarnine ts sicnat woro inpicares a HAZARDOUS SITUATION WHICH, IF
[NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY.
AX caution this siowat woro inotcares a HAZARDOUS SITUATION WHICH IF
[NOT AVOIDED, COULD RESULT IN MINOR OR MODERATE INJURY.
NOTICE _ NOTICE Is USED TO ADDRESS PRACTICES NOT RELATED TO PHYSICAL
JURY.
GENERAL SAFETY PRECAUTIONS
WARNING! READ MANUAL PRIOR TO INSTALLATION
A
A
Improper instalation, operation, or maintenance ofthis equpment coud resi in se-
‘usr 0° death. Operators and maintenance personel shoul read the mara,
‘2 wl all manuals related to his equipment andthe prime mover thorough
Bore beginning stato, coeraon, of mantenance, FOLLOW ALL SAFETY
INSTRUCTIONS IN THIS MANUAL AND THE PRIME MOVER'S MANUALIS}.
READ AND UNDERSTAND ALL SAFETY STATEMENTS
Rod allsaety decals and salty sslareats in all manual srt operating or
werking on his equipment. Koow and obey ll OSHA reguctons, ea laws, nd
‘her professional guidelines fr your operaen. Know and follow geod werk rac-
tees when assemeing, maintaining, repating, mounting, removing, er operating this
KNOW YOUR EQUIPMENT
‘Know your equpmentscapablites, dmensions, and operations before cperatn.
‘Visual spoct your equipment lore you sat, and never operate equipment hat
is tin proper Working err wit al steydevoos intact. Check al haw fo
‘neuritis tg: Make certain hat llc pins, etzhas, and conection devices
‘re propery stalled snd secured. Remave snd replace any damaged aQved |
‘xoesshly wom pars, Make certain al safety deals ao In place andar eile,
‘Keep dca lean, and replace them hey bacome worn ot hard 1 eadGENERAL SAFETY PRECAUTIONS.
WARNING! PROTECT AGAINST FLYING DEBRIS
‘Aways wear proper salelygastes, goggles, or face shield when diving pin nor
ou when any operation causes dust yng brs, or any the hazardous mate.
WARNING! LOWER OR SUPPORT RAISED EQUIPMENT
‘anct work under asad booms without supporting hem. Do nt use support mate
ial made of concrete tock, loos buckets, bare, anyother mara st could
‘Siadent colapse or shi postions, Make tue supper mater sci, not de
‘Sayed, warped, tte oF apere. Lower booms fo ground level ron blocks, Lower
booms and attachments to the ground bear leaving the es or operator taon
WARNING! USE CARE WITH HYDRAULIC FLUID PRESSURE
Hyeraufc uid under pressure can penetate the skin and cause serous nur or
death Hyrouic aks under pressure may ot be wile, Before comecng or di
‘onecing hydra hoses, read your pia movers operator's mara fr detaled
Insrucions on connecting and cconnectnghycraule hoses or fing
ace, eye, and arms a faraway as
cid wth Myra fui may Sovlop
(Gangrene or ctr permanent abies
+ injured by recta tui, sea doctor at once, your doctor not aia with
this typeof nr. ask im ex he to esearch inmate to determine pope
treatment
+ Wesr safety lases, protective doting and use apace of cardboard or wood
\whon searching for hydraulic leaks, DO NOT USE YOUR HANDS! SEE ILLUS-
TRATION.
‘CARDBOARD
HYDRAULIC HOSE
OR FITTING
MAGNIFYING GLASS
I
sareWARNING!
A
WARNING!
GENERAL SAFETY PRECAUTIONS
DO NOT MODIFY PRIME MOVER OR ATTACHMENTS
Modietions may weokon th integrity ofthe sllactrnet and may Inpathe func:
{on safety. fe, and performance of tachment When mating rape, ae ly
the manufacturers gonuine pers, folowing authorized instucions. ier parts may
‘be substandard inf and quay. Never meaty any ROPS (Rol Over Prtecve,
‘Sueute) or FOPS (Fling Object Preecive Stuctre) equpert ot device. Ay
"modiistons mus be autherizoa in wing by the manactrt
‘SAFELY MAINTAIN AND REPAIR EQUIPMENT
* Dp not weer lose ting or ny accesories hat can cate In moving parts.
‘you hav lng hair, cover or secre eo that & does ot become eta i the
eaupment.
+ Work ona ove surtace ina walt area
+ Use proper rounded eloctcal cues and tools
* Use the correct tol forthe jo at hand, Make site hey at in good condition or
tho task requred
* Wear he protecive equmentspected bythe to! manufacturer
‘SAFELY OPERATE EQUIPMENT
‘Do not operate eautment ui you are completely rane ty a qualied operator
innow tose the conto, know ts capabttes, mansion, an al sae eau:
mens. See your prime maver's manual for these sractons.
* Koop all step plates, grab bars, pedals, and cones free of dit, gease, debi,
‘and
+ Never alow anyone fo be around the equipment when iis operating,
+ Dont atow kes on the attachment othe pme move.
+ Donot operate the equipment fem anyaere other than the correct operators
poston.
+ Never lesve equipment unstonded wih the engine running. or with his atach-
‘mentinaraisea penton
+ Donot ater or remove any safety feature from the pine mover or this alse
Know your work ste safety res a8 wel as trafic les and ow When in doubt
‘nay slaty issue, conta! your supenisr or safety coordinator for anexplnd-
sarai
straa
EQUIPMENT SAFETY PRECAUTIONS
KNOW WHERE UTILITIES ARE
(Observe overhead social and ther lly nes, esuraequpmént wl ear
them. When diging, cal your local ules for oeqion of ured uty Ines, os,
water and sewer, as wells any ober hazard you may encounter.
EXPOSURE TO RESPIRABLE CRYSTALLINE SILICA DUST
ALONG WITH OTHER HAZARDOUS DUSTS MAY CAUSE
SERIOUS OR FATAL RESPIRATORY DISEASE,
iis recommended use us suppression, dst collecon and necessary
sonal pace saupment au te operation of any each at
use ghee onde ” ~
REMOVE PAINT BEFORE WELDING OR HEATING
Hazardous fumosidst canbe generat when pant heated by welding olering
‘rusing a torch. Doll wrk outise ora Wel ventlte area, end dispose of part
‘snd sent propery Romave pail blere woidng or hesin,
\Wnen sanding or rinding ait, aved breathing the dus. Wear an approved esp
‘or you use stent or paint spp, remove stippar wh aap and water tore
\wesing, Remove sven or pint eipper containers and other fammable mates
from aea, Allow fumes to spree a fast 15 minutes blore welding or heating,
END OF LIFE DISPOSAL
[ithe completion of he useful of he unt, in al ids and cman by sepe-
‘ating the diferent mates (ber, sta lest, ete). Flow al federal state and
local reguations fr recycing and posal the uid and components
OPERATING THE ATTACHMENT
Block ot work aoa from bystanders, nestck, te. Flying debris can cause severe
iy cr death. The breaker is capable of producing arg amount hing debris in
a rotons,
Let obes know when and where you llbe weekng Make sure na anes being
‘he equipment or for several hunched fet in any rection aroun te equipment
when operation, Never alow anyane to approach the breaker when nopetion,
Do not operate breaker ona prime mover without top and ont gud hil or
FOPS (Fling Otject Proteciva Srucure) stale,
‘Bo not exceed rated operating capaciy of prime mover
‘Operate ony am te operator’ station.
When operating on slopes, sive up and down, nt across. Avid steep hse op
‘sation, whi cou cause he prime maver fo over,
Reduce sped when driving over raugh train on slope, or tuning, We avid over
turing te vehi
Never it, mov, of swing a load or atachment over anyone,
‘Bo no it ds in exces the capacity ofthe prime mover, iting apaciy de
«eases 2 he load ie moved further eiay fom the nt,A
A
A
EQUIPMENT SAFETY PRECAUTIONS
OPERATING THE ATTACHMENT (Continued)
+ Whon using brasker with a auckeoupar, opera shou check total working weight
Incuding woiht of the coupler Aways make sure coupler is securely ecked ona
tachment before use
‘The attachment shoul ot be used a a parking brake to ienciize your prime mor-
eo used in any way 0 asst n moving your prime move. Fw the instuctons in
your rime mover opera's manual bee leaving the opeatr’s station
+ An operator mus nat use drugs or slechol, whch cn change hi o: he aletness ot
coriaton, An operator taking prescription or overshe-countr drugs should seek
‘modi advlee on whether or not he o she ca safely operate espns
Belore exiting the prime meer, oar the attachment to the ground, apply te rakes,
‘um off th pre movers engine and remove to key
TRANSPORTING THE ATTACHMENT
“+Travel ony withthe attachment in a safe transport positon o prevent uncantled
movement. Dike Soaly ever ough rain and slopes
+ mon wansporing ona wale secure atachment a recommenced ie down locations
singe down accessories that are capable of manning attachment sts
+ Whon ckiving on public roads use salt ight, reflector, Siow Moving Vehicle Sons
‘cy to provent sectors, Check local government uations that may set you
Donat ve clase to dices, excavations, et, 28a cavern coud resi.
‘Donat smoke whan rtuaing the prime mover low room nthe fel an or expan
‘on: Wipe up any sie fool Secure cap Shey when dons,
MAINTAINING THE ATTACHMENT
+ Before performing maintenance (ules otherwise species), mer the atachmento
‘he ground, apy tho brakes, tum of the engine nd remove key.
+ Never pefom any work on the attachment unless you ere autora and qualified
todo so. Aways read te operator sarvice manuals foe any repairs made. Afar
‘camplang maintenance or rar, chock or comet fnetoning of te tach.
not fanconing prope, aways tag DO NOT OPERATE” unt a problems are ot-
rete
‘Worn, damaged. or lento safety decals must be replaced. Now safely docls can
‘be ordered fom your local dealer or the manufacture.
+ Never make hycrulc repairs whe the system is under pressure. Serious personal
injury or death could osu.
+ Never werk under a raised attachment
sireDECALS
DECAL PLACEMENT
GENERAL INFORMATION
“The ‘ollowing dagran(s) show the location ofthe decals used on you atachment. The decal ate
'doniod by the pat numbes, wih reducion ofthe actual decals shawn onthe allowing pages, Use
ths informaton to order replacernont fo lst x damaged decals. Bs sur to read the doce bore
operating coupler. They conan nfermaton you need to know for Soh safely and prods longevity
IMPORTANT: Keopalsafety decals clean and gible. Replace all missing, legible or damaged safety
‘cecal. When opacing parts with slay decals tached. the ely Uecas must ls be epee
REPLACING SAFETY DECALS: Clean the area of application wth nontemmatie sven then wash
the same area with soap and water. lew sutae la haty dy. Remove the backeg fom te safely coca
{exposing the adhesve surface. Appl the safety decal oho positon shown te hagiam above and
Smooth ot any bubbles,
SERIAL TAG LOCATION
84001200,
sAsobtit0; sFBLoGo
wa2004t20 MODEL NUMBER
Loco SHIELD
-¥94004090DECALS
WEAR PROTECTIVE EQUIPMENT (A4001200):
MANDATORY ACTION: Alaye wr proper afty
equipment suchas safety glasses, ear prtecton
‘neha hat when operating equipment
READ MANUALS.
MANDATORY ACTION: Read operation an sr-
FLYING DEBRIS HAZARD:
Slay back a sate distance fom attachment when
{ism operaten- Fas to comply code result
GREASE EVERY 2 HOURS (84004000);
Grease fing locaton
Lin]
(our]
RETURN HOSE “OUT” DECAL (A2004120)
The following decal kits can be purchased
through your local dealer.
it 28-10980 (SFB1000)
Kit# 28-10981 (SFB1500)
‘it 28-10982 (SFB2K)
Kit 28-10983 (SFB3K)
Kit# 28-10984 (SFBSK)
Kit# 28-10985 (SFBSK)
Kit # 28-10986 (SFE6K)
‘kit 28-10987 (SFBBK)
‘it 28-10988 (SFB10K)
‘it# 28-10989 (SFB12K)
(Individual decals not sold separately.)
SFBLOGO
W/
WV
Loco sHieLDINSTALLATION
GENERAL INFORMATION
PALADIN hyéraue Breakers are designed 1 be eat touse and maintain. Thay ate operated by
the prime mover’ aunliary hyéraules. Duo‘a the varus pame movers hat ase attachment can be
‘mounted onal oreakers are shipped wiheuthyarause hoses. Those canbe purchased fom your lal
‘eal The hoses must be long enough not did open during operation an at fo fhe manu
hare pressure of your pre movers hyerautc syciem. Soe Spoctcalens section for hase zero"
quremens.
WARNING! The prime mover must be equipped with an operator enclosure that will pro-
Vide a safe operating environment whenever working with material or objects
that may intrude int the operator's station.
INSTALLING TO PRIME MOVER
41. Remve any attackment tom the fan ofthe ood.
2. Flowing al standard safety practices an he instructions for nstling an atachentin your prime
‘mover operators mana, instal he attachment onto your leder
WARNING! To Avoid Serious Personal Injury, make sure the attachment is securely
latched to the attachment mechanism of your unit. Faure to do so could re-
sult in separation ofthe attachment from the unt
3. Lower the uit othe ground and relive pressure to the auxllary hyraue ns, Breaker should be
postoned on ground so the valve bloc facing upwards
4 Fotoning the sfty shut down procedure for your prime mover, shut own and ext he pine
5. Aer mang sure tha the hydra ies are re om any foreign material or contaminants, con
esto he aulary hyeraute system of your puime mower
8. _Folloning the standard startup procedure for your prima maver, st the loader and run the atach-
mento pure anya om the system. Check for propor hyrauleconpecon, hese roving ard
howe length
7. Allsermentinstaliaton i compet,
DETACHING FROM PRIME MOVER
1. Belore extng the prime mover, ower stachment tthe ground, apply the brakes, um of the pie
‘movers engine and remove the key. Breaker shuld be positoned on ground othe va loss
cing upwards
2. Folow prime mover opera's manuals to ellove pressure inthe hydra nes,
3. Disconnect nyrauicines and instal dus caps ang plugs to prevent contamina fm enteing
the hyraul system Store hoses on atlachment, ofthe round
4. Flow your prime mover operator's manual for detaching (removing) an tachment
saraINSTALLATION
TOOL STYLE GUIDE
“The cht blow shows the varus yes of tos avalible for use wih your hydraulic breaker. Choose the
-Sylotool that bests your spplleston
1“
TOOL TYPE: ‘APPLICATIONS
CONICAL MO ‘ey eodpeeraton
ant yaad ryan
seve oeatra
we |e ees
ee ais | ans | asa | cas |e | size | mam | m0 | 0 | sso
cio, | fee | rn | oy | ay | a0 | a0 | sm) eon | cy
moe |) |] ay | sem, a cn] a | i tm | | | cy
Ve
co (ey | aes | sn | oy | ess 0; | Ce | cis | eon | ec)
e
aan sts | ans | 54 | aa | ras | sum | oon | 50 | saor | 0
ee, | as, | oy | com | ay | ty | (05 | am | ey | et
lo
1472sINSTALLATION
a waar
To et
oa sore | ro | wore | aoe | ser | ox 122 | sas | sas
‘an | to | aen| wn | dan | aan | ate | cm | fam | aan
‘ot a | Gee | dra | ‘| am | dam | cee | ca, | ato, | doy
®
ae waa | ce) | don | ‘oor | dan | ae | dm | con | Gey | Bah
e
a Gh | ees | eo] a | dam | | con | dam | ie | iy
lle
‘TOOL BIT INSTALLATION / REMOVAL
Lower beaker othe ground an place on wood blocks, making
sure tis on aeve suse,
Remove tol pin caver pate (2) by removing bois (1),
With cover pate romoved, remove urethane cover (2)
Remove tol pins (4) by using a M8 size oe bl. Tread the
‘2y@ at ino the lel pin and Ue to pl te pinout othe
bresker
Ins tol it 5) and reassemble in revere ort
ease ox bore use. Reference Maintenance are Soice
secon fruition speciation.
siresOPERATION
GENERAL INFORMATION
“Te hydraule breaker attaches othe altachment mauning mechanism of your prime mover. Due to
tna arengement. thorough inwdge of your prime movers necessary fr machine operation, Read and
Undarsand your prime move’ operator's manual befowe atempting to use the breaker.
efor operating the braker, check the Speciation secton of hs manual for coreet se of
‘ime mave, yrell low and pressure requirement, Check thatthe rel pressure saengf win
Fange gen per specication for your troakor model the vel pressureis rot cored adjust the rel
‘ave according
‘Als check that ol fom, the spect
for yur bresker model. the pm mover hi
‘othe ol fw i witing the specie range.
NOTE: always install lw meter between breaker inlet and outlet hoses when setting hydraulic ow
nd pressure, Do not rely on prima mover gauges,
operating pressure, fs win range gven per splcaon
mofo corral vale, agus the conta valve accordingly
Ivoreaker is used wih pre mover exceecng the spectlcatons inthis manual tho tool waranty Is ol
The breaker hasbeen propery charged wi nitogon atthe factory ands ready or use
INTENDED USE
‘The Paladin hye breaker I designed asa domsitio el for breaking vp hard mates
_as rocker eonctle, Use in any her way consdered contr othe nonded se.
Some examples f misuse include, but are not lite o, the alowing
Movin Loads
Dom nae oe nh betrsker Moa une ws |)
Sirutl beter nos are Sage é
oe
®
iting Loads
‘0 not It lane wth the breaker ited loads may fal easing
sorus inry or dat,
16OPERATION
‘Operating with Gvlinders at End Positions
Do not operate breaker wth prime mover arm and bucket ylinders
In tno i extended ory erected poston, Doing so may cause
damage tthe elder,
Prving Loads
Donat use demotion tol a a pry bar. Dolng so may cause pms
‘ure wer of he tool bushings and posi ale of he boaker
‘Slant Hammering
‘Always keep breaker a #60 degree angle othe materia while
inuse. Sant hermering wl add stress and bending fre tothe