Professional Documents
Culture Documents
SAFE PROCEDURE
TASK/PROCEDURE HAZARD
Common air operated hand tools include Injuries from flying particles; eyes, Adequate operator training is required
drills, impact wrenches, ratchets, sanders, puncture wounds before operation. Training must be
and chisels. specific for the type of tool to be used.
Exposure to high noise levels Training must include lecture and practical
Air operated fastener tools such as nail demonstration
and screw guns are NOT covered by this Air entering into the body
Inspect all tools before use to ensure safe
JHA
Sprains and strains to fingers, hands, operating condition. Defective tools must
wrist, elbow, shoulder be taken out of service and tagged “DO
NOT USE”. Repairs can only be made by
Contusions and abrasions to fingers, training repair technicians.
hands
Loose, leaking fittings must be repaired or
replaced. Safety wires must be installed
on all twist-type couplers.
JHA 1 3/12