Professional Documents
Culture Documents
Wireless Sensor Setup
Wireless Sensor Setup
Turn on wireless sensor
Popup briefly appears
Start TAM (if not already running).
Click “Setup Hardware”. Add the sensor to My Sensors by clicking
“Use Sensor” (if not already listed under
“My Wireless Sensors”)
Verify that ba ery level and signal strength are good
Click the “details” bu on to proceed with sensor setup
QAD 5000‐1
Wireless Sensor Setup
Click the “Details” bu on next
to the sensor name
Click the “Coeff” tab and verify the
calibra on coefficients
For WPRT’s no addi onal setup is required.
You may close the popup window and pro‐
ceed with tes ng.
Verify that the WHT sensor is not loaded and that the pressure is atmospheric for WPT and WRFG
Click the “Zero Offset” tab,
then click “Get New Offset”
Click the “Use Shown Value”
to accept new offset
Click the “All Sensors” bu on to return to the main setup screen and configure other devices, or close the
popup window to proceed with tes ng. Changes will save automa cally.
QAD 5000‐1