Pressurised oil from pump 1 enters port P1 of control valve
A. Pressurised oil from pump 2 enters port P2 of the control valve.
Operation of the dipper close control directs pilot pressure
oil through shuttle block and cushion valve to port PLb4 of the control valve to switch dipper 1 spool. At the same time pilot pressure oil, divided at the shuttle block, flows from port C4 to port PRb5 of the control valve to switch dipper 2 spool. At the same time pilot pressure oil, divided at port C5 of the shuttle block, enters port Pi2 of the control valve and moves the spool to release the load holding valve, enabling the return oil from the dipper cylinder to flow to tank and dipper close movement to be executed.
Pressurised oil form P1 and P2 converge within the control
valve and 2-speed dipper closing is performed. Also, return oil from the dipper cylinder is recycled to the supply side by the dipper 1 spool recycle circuit, increasing operating speed even more.