Pressurised oil from pump 1 enters port P1 of control valve
A. Pressurised oil from pump 2 enters port P2 of the control valve.
Operation of the bucket close control directs pilot pressure
oil into control valve port PRb4 and switches bucket spool BKT. At the same time, pilot pressure oil, divided at port C10 of shuttle block, enters control valve port Pi3 to switch the P1 side spool. Pressurised oil flows from control valve port P5 and, via the external hose, enters port P4. Because the P1 spool side is bleeding off, the pressurised oil from P1 and P2 converge before bucket spools perform the bucket closing function at one and a half pump flow.