Professional Documents
Culture Documents
Rifle/shotgun sights
BRIGHTSIGHTS GUN SIGHT COATING
RING SIGHT SET Quickly Turns Mounts Rifle Sights On
Rib-Equipped Shotguns Highly Visible Paint
For Tactical & Hunting Use Plain Barrel Shotguns Improves Sight Contrast
Into Slug Guns
Includes green tritium front sight and two, interchangeable, fully Steel, screw-on/sol-
Give your favorite Tough, flexible coating
adjustable, rear ghost ring apertures to accommodate long- and der-on ramps with stan-
shotgun a more accurate, provides a highly visible
short-range shooting. Steel wings give added rear sight protection. dard 3/8" dovetail and a checkered rear surface to cut glare. .4375"
rifle-style sight picture in contrast between sights
Dovetailed front sight fits factory sight ramp with minor fitting. a b radius designed for 12 gauge barrels with .875" outside diameter. a b
only minutes. Clamps to vent-rib; fast to install and fast to remove. and target. Provides more
SPECS: Steel, blue, matte finish. Tritium dot/white ring front sight, 3/8" SPECS: Steel, blued, matte finish. 13/4" (4.4cm) long x .612" (15.5mm) wide.
Adjusts for windage and elevation. Front sight provides a red dot that accurate shot placement,
(10mm) high. Rear Sight – base, 1 /2" (38mm) long, /4" (19mm) wide, 1"
1 3
Heights - /8" (3.1mm), /16" (4.7mm), /8" (9.5mm). Accepts narrow ramp
1 3 3
glows in all ambient light conditions. The more light, the brighter it improves sight picture and focal concentration on front sight. Du-
(25mm) long. Small Aperture I.D. - 3/16" (4.8mm); Large Aperture I.D. - sight blades.
glows; won’t “wash out”, even in direct sunlight. U-Notch rear blade rable, won’t harm firearms finish. Easy-to-apply Five Color Kit for
7
/32" (5.6mm). Rear sight requires drilling and tapping, front sight requires
is equipped with a bright green rod on either side of the notch for #962-011-125AT Shorty Ramp, 1/8", 2F21F99�������������������� $ 22.99 use on rifle, pistol and handgun sights. Three color, Ghost Glow Kit
sight ramp.
precise, low-light sight alignment. a b #962-011-187AT Shorty Ramp, 3/16", 2F21M99������������������ 22.99 contains a light activated, luminescent coating for use in reduced
STOCK # FITS PRICE SPECS: Machined aluminum, black, anodized, matte. Universal fit for all #962-011-375AT Shorty Ramp, 3/8", 2F22A65�������������������� 24.99 visibility situations. a
b
shotguns equipped with 1/4" (6.3mm), 5/16" (7.9mm) and 3/8" (9.5mm) wide, SPECS: 3cc glass bottles. Five Color Kit - Red, White, Green, Orange and
#006-000-108AT Rem. 870/1100/11-87 6K143N80 $ 157.50 Yellow, plus cleaner. Ghost Glow Kit - Green, Yellow and Orange colors
vent ribs. Rear - “U” notch fiber optic. Front - Fluorescent red front bead
#006-000-109AT Mossberg 500/590, Ithaca 37 6K133I53 $ 144.00 on sheared-style blade. Includes wrench and instructions. plus Green, Yellow and Orange luminescent, light activators.
— Advise # — Tactical Sight Set, 6K143N80������������������ $ 157.50 #962-000-014AT Universal Slugger Fire Sight, #100-000-243AT Gun Sight Five Color Kit, 3K11H12������ $ 14.95
2F30N01 �����������������������������������������������������$ 31.99 #100-000-244AT Gun Sight Ghost Glow Kit, 3K16J31�� �� 24.95
VANG COMP SYSTEMS
SHOTGUN FIRE SIGHTS - Models for REM 870/1100/11-87
pre-2003 Remington 870/1100, Moss-
XS SIGHT SYSTEMS REMINGTON SHOTGUN berg 500, and Winchester 1300 guns GHOST RING SIGHTS
equipped with slug or turkey barrels and Extremely Rugged;
TACTICAL GHOST RING SIGHT SET factory sight bases. Front sight provides a glowing red dot that’s
Provides Fast Target Acquisition FRONT SIGHT INSERT KIT
easily seen in all ambient light conditions. Fully adjustable, U-notch
Speeds Sight Acquisition rear has two glowing green dots for precise sight alignment. a b Heavy duty Picatinny rail
SPECS: Machined aluminum, black, anodized. Rear - “U” notch fiber op- Make Inserts Quickly & Easily
Convert your shotgun to a tactical with integral ghost ring sight
tic. Front - Fluorescent red front bead on sheared-style blade. Includes naturally centers for fast target In A Variety Of Colors
workhorse. Banded front sight features instructions. Remington fits Remington shotguns with 3/8" dovetail front
green, tritium dot surrounded by a white acquisition during tactical ops.
sight ramp. Front sight features a blade with It’s been several years
ring. Supplied shims ensure barrel band since there was a good,
clamps snugly around muzzle. Con- #962-565-300AT Remington Fire Sights, 2F23F49���������� $ 24.99 white dot and solid steel side
guards for maximum protec- do-it-yourself product
toured rear sight requires drilling and #962-000-001AT Mossberg Fire Sights, 2F25C95������������ 27.99 on the market for making
tapping; includes two interchangeable #962-000-002AT Winchester Fire Sights, 2F27A76���������� 28.99 tion. Aperature is fully adjustable for windage
and elevation using clearly marked adjustment sight inserts, so we decid-
aperture sizes. Completely adjustable for windage and elevation. a b ed the best way to fill the
SPECS: Steel, black, matte finish. Front Sight - Tritium dot with white ring, screws that hold under heavy recoil. Front sight
REMINGTON GHOST RING FIRE SIGHTS - is adjustable for elevation with included tool. Rail allows mounting gap was to go out and de-
3
/4" (19mm) high from top of barrel. Rear Sight - Base, 11/2" (38mm) long, velop our own. The result
Bright, high contrast fiber optic sights with or scopes and red dot sights. Designed for non-ribbed barrels. a b
3
/4" wide, 1" (25mm) long. Small aperture I.D., 3/16" (4.8mm); large aperture is our latest “assist” for the
large aperture, rear ghost ring provide fast, SPECS: Fits Remington 870/1100/11-87 shotguns with non-ribbed bar-
I.D., 7/32" (5.6mm). Fits Rem 870, 1100, 11-87 shotguns with .860-.885" professional gunsmith and
accurate sight alignment in all light condi- rels. Front sight requires soldering with Silvaloy 355 (not included). Ghost
(21.8-22.5mm) muzzle diameters. serious hobbyist - a kit with everything you need to add, change,
tions. The more light, the brighter the beads ring/rail requires drilling and tapping receiver for 8-40 tpi screws. Includes
#006-000-107AT Tactical Ghost Ring Sight Set, glow. Front sight has a single red insert, rear mounting hardware and instructions. Front Sight - Steel, in-the-white, or rebuild colored front sight inserts on revolvers quickly and easily.
6K165K98 �������������������������������������������������$ 181.80 ghost ring has two green inserts to form .110" (2.8mm) diameter white dot. Ghost Ring/Rail - One-piece, hard Although primarily designed for wheelguns, it’ll also let you make
#006-000-118AT Banded Front Sight, only, an easy-to-align, 3-dot sight picture. Fits custom inserts for a variety of rifles, shotguns, and pistols. Sight in-
handgun sights
anodized aluminum sight body and rail. 2.2 oz.(62.4g) weight. Rail - 23/4"
6K73J19����������������������������������������������������� 81.00 Remington shotguns with 3/8" dovetail front (7cm) long x .830" (21mm) wide. Aperature - Steel, black. .23" (5.8mm) I.D. serts offer many benefits for target shooters and hunters, especially
sight ramp. a b .5" (mm) high from top of receiver to center of aperature. in situations requiring fast, accurate front sight acquisition, like dawn
SPECS: Steel front 3/8" dovetail sight. Aluminum rear sight. Black, matte and dusk, when game is more likely to be active. Never again replace
#100-003-640AT Rem. 870/1100/11-87 Ghost Ring a perfectly good front sight because it’s too hard to see in low light,
finish. Fiber optic insert. Bead - 1/16" (1.6mm) dia. Ghost Ring - .15" (3.8mm) Front Sights, 6K61B91���������������������������� $ 69.99
dia. aperature. your eyes aren’t as good as they used to be, or because the insert has
#100-004-335AT Rear Ghost Ring Sight w/Rail, faded, broken, or fallen out. Our kit contains everything you need to
#962-000-083AT 2003 & Earlier Ghost Ring Fire Sights,
XS SIGHT SYSTEMS SHOTGUN 2F24E42�������������������������������������������������������$ 25.99
6K180P12��������������������������������������������������� 189.99 make professional looking inserts formed to the exact contours of
your gun’s front sight. Mix the liquid acrylic and powdered activator
BIG DOT TRITIUM FRONT SIGHT with the concentrated dye to create bright, high-contrast inserts
ITHACA 37 FIRE SIGHT - Contrasting, that are stronger and more durable than factory originals at a frac-
Installs Easily Over The green rear and red front dots provide tion of the cost of replacement or custom sights. Kit includes dyes
Existing Bead Sight excellent sight visibility. Eye-catching in five popular colors—red, green, orange, yellow, and white. Step-
colors give fast, accurate sight alignment XS SIGHT SYSTEMS REM 870/MOSS 500 by-step instruction booklet show you how to mix the ingredients
High-visibility Tritium dot
front sight surrounded by a
against dark backgrounds. Fully adjust-
able for windage and elevation; replaces
SHOTRAIL (the ratios aren’t that critical so it’s tough to screw up) and create
forms to install inserts that won’t shoot loose, even on the hardest
large white ring helps improve target focus and low light sight ac- factory rear sight and front bead. Fits Gives Your Shotgun A Rifle- recoiling guns. We also explain, in detail, how to hand cut a dovetail
quisition and sight recovery after muzzle flash. Installs over existing Deerslayer models, no gunsmithing required. Metal body con- Style Sight Picture for an insert on a gun that doesn’t already have one. With a hardening
front sight beads from .125" - .140" diameter by filling the cavity on struction for durable service. ab time of around 20 minutes, it’s so fast and easy you’ll want to add in-
the underside of the sight with Brownells Acraglas Gel, then press- SPECS: Aluminum, anodized, matte black. Rear - 21/2" (6.4cm) long, fits Easy-to-install tactical serts to get the best accuracy and maximum versatility from all your
ing the sight over the bead and allowing it to fully cure. If existing nominal /8" dovetail. Front blade - 5/8" (15.9mm) long. sight set has a Picatinny-rail
3
iron-sighted guns. Refill supplies sold separately, so you can replace
bead is too small or too large, replace with Brownells #6 bead for section with ghost ring rear
#962-000-017AT Ithaca 37 Fire Sight, 2F32E14�����������������$ 34.99 only the ingredients you use up rather then buy a whole new kit. a b
3-56 threads or #26 for 6-48 threads. Some shotgun barrels may sight and banded front sight. SPECS: Kit contains: 1 oz. (29.57 ml) Liquid Acrylic; 2 oz. (59.15 ml) Pow-
require drilling and tapping of existing hole to 6-48 for installation of Picatinny rail is pre-drilled for factory optic mount holes. Ghost ring dered Activator; .05 oz. (1.5 g) each of red, green, orange, yellow, and
#26 Brownells bead. Remington Pedestal model with stepped bot- is adjustable for windage and elevation. Banded front sight post has .19oz. (5.3g) of white pigment; 5 mixing cups; complete instructions.
tom fits Remington shotgun barrels with front sight pedestal. Vent a Tritium dot for visibility in all light conditions. Fits barrels less than
Rib model with flat bottom fits shotgun barrels with ventilated ribs. #081-000-370AT Front Sight Insert Kit, 1H48N16 ���������� $ 60.99
8.860" in diameter that do not have a front sight rib or base. a b
Plain Barrel model with cupped bottom fits round shotgun barrels. #006-000-158AT Remington Pedestal Big Dot Tritiuim, SPECS: Picatinny Rail – Aluminum, anodized, black. Front/Rear Sights - #081-000-371AT Powdered Activator, 2 oz., 1H8I12������ 12.47
Includes instructions. a b 6K58A23 ���������������������������������������������������� $ 63.90 Stress-proof steel, black oxide finish. Fits barrels with .840" to .860" O.D. #081-000-372AT Liquid Acrylic, 1 oz., 1H16H93�������������� 20.97
SPECS: Machined steel, black, matte finish. Big Dot .161" (4mm) diameter. #081-000-375AT Red Pigment, .05 oz., 1H3H85�������������� 4.99
Fits beads from .125" (3.2mm) to .140" (3.5mm). Remington Pedestal fits #006-000-159AT Vent Rib Big Dot Tritium, 6K58L23������ 63.90 #006-000-185AT Mossberg 500/590/930 ShotRail,
Remington front sight pedestals. Vent Rib fits ventilated ribs. Plain Barrel #006-000-160AT Plain Barrel Big Dot Tritium, 6K162N66������������������������������������������������ $ 180.00 #081-000-376AT Orange Pigment, .05 oz., 1H3Q93������ 4.99
fits round barrels. Includes instructions. 6K58M23���������������������������������������������������� 63.90 #006-000-186AT Rem 870 ShotRail, 6K162E66 ������������ 190.80 #081-000-377AT White Pigment, .19 oz., 1H4E07 ���������� 4.99
SATISFACTION GUARANTEED
PAGE 294 SINCE 1939 Office/Tech: 641-623-5401
AMERIGLO SEMI-AUTO PISTOL SIGHTS AMERIGLO SMITH & WESSON
Low-Profile Combat Sights In Plain Black Or With Tritium Dots SIGHT SETS for GLOCK® DELUXE REAR SIGHT REBUILD KIT
Fixed, low-profile combat sights are drop-in replacements for factory sights and feature streamlined contours with rounded corners
handgun sights
Extra Height To Clear Sound Suppressor
to help prevent snags and hanging-ups. Precision-machined steel sight bodies sit low in the slide to resist catching on clothing during the
Or Co-Witness With Red Dot Everything You Need To
draw, yet stand up to the abuse of hard operational and competition use. a
b Rebuild S&W Rear Sights
SIGHTS for GLOCK - Night sights have two self-illuminating, Trijicon Tritium inserts in the rear sight and one
® ® Fixed combat sights are drop-in re-
placements for factory sights and are Rebuild and repair Smith & Wesson rear sights with ease. The
in the front blade to provide an easy-to-see, 3-dot sight picture in low-light conditions. Helps you acquire the kit features the all the parts you need plus special tools to install
sights and get on target quickly under stress. Works like a simple, 3-white-dot system for enhanced visibility made extra tall to provide enough clear-
Ghost Ring ance for pistols equipped with a compensatory or suppressor. They them. The S&W Sight Nut Spanner is a MAGNA-TIP® bit that fits the
in daylight. Nothing to turn on: as the ambient light gets lower, the Trijicon® Tritium dots start glowing. Classic windage nut. The S&W Sight Staking Punch eliminates the chance
Tritium sights have standard-width rear notches, and green front and rear dots. Pro Series night sights have an also enable co-witnessing through a Trijicon RMR or similar red
dot sight. Available in plain black or with green Tritium inserts that the rear sight will come off when adjusting the windage on Smith &
extra-wide rear notch that allows more light around the front blade to speed target acquisition. Rear sight face Wesson revolvers. a b
extends all the way to the back of the slide for maximum sight radius. Wedge-shaped rear sight body has fully produce a classic, horizontal three-dot picture. Sold as front/rear
Pro Series sight sets. ab SPECS: Punch - S2 tool steel, black oxide finish. 4" (10.2cm) long, 3/8"
rounded edges and sits low in the slide to resist snagging on clothing during the draw. Green front sight insert; (9.5mm) dia. Kit includes: (6) Windage Nuts, (6) Windage Screws, (6)
available with Green or Yellow rear dots. Ghost Ring rear aperture sight uses the eye’s natural ability to center SPECS: Machined steel, non-reflective matte black finish. Fits all Glock
pistol models. Front: .450" (11mm) long, .125" (3.2mm) wide, .315" (8mm) Plungers, (6) Plunger Springs, (6) Elevation Studs, (6) Spring Clips, (2) S&W
objects in a circle to aid in fast target acquisition. Tritium dots on each side of the ghost ring are smaller than Sight Nut Spanner bits, (1) S&W Sight Staking Punch.
the front sight dot to eliminate confusion during sight alignment. Green front sight insert; available with Green high. Rear: .315" (7.9mm) long, .835" (21.2mm) wide, .305" (7.75mm) high.
or Yellow rear dots. Plain Black front sights have traditional, fine-line serrations on the rear face to help prevent Tritium inserts: .070" (1.75mm) diameter. #080-000-090AT S&W Sight Staking Punch, only,
Classic 8K14E03������������������������������������������������������$ 14.99
glare. Can be used in conjunction with Night Sights for distinctive dot/no-dot combination sight pictures. #100-009-854AT Extra-High Glock Sight Set, Plain
SPECS: Machined steel, matte black finish. Plain Black – Front: .450" (11mm) long, .090" (2.9mm) wide, heights indicated in table. Night Black, 4K41J95 ���������������������������������������� $ 49.99 #078-000-040AT S&W Deluxe Rear Sight Rebuild Kit,
Sights available with green front/green rear (G/G) or green front/yellow rear (G/Y) dots. Classic Night Sights – Front: .450" long, .140" #100-009-851AT Extra-High Glock Sight Set, Green 8G96G54����������������������������������������������������� 103.99
(3.6mm) wide, .165"(4.2mm) high. Rear: .315" long, .830" wide, .150" (3.8mm) wide notch. Pro Series – Front: .450" long, .125" (3.2mm) Plain Black Tritium, 4K81M70 ������������������������������������ 84.99
wide, .160" (4.1mm) high. .11" (2.8mm) diameter green Tritium dot. Rear: .650" (16.5mm) long, .720" (18.3mm) wide with .180" (4.6mm) Front
wide notch, and two .070" (1.8mm) diameter Tritium dots. Ghost Ring – Front: .450" long, .125" wide, .240" (6.1mm) high. .11" diameter
green Tritium dot. Rear: .700" (17.8mm) long, .740" (18.8mm) wide, with .270" (6.8mm) diameter aperture and two .050" (1.3mm) diameter Tritium dots.
CYLINDER & SLIDE
FITS DESCRIPTION STOCK # PRICE ARO-TEK™ ARO-SIGHT for GLOCK® “STRONG” FRONT SIGHT
17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38, & 39 Classic Tritium, G/G #100-004-575AT 4K81G70 $ 84.99
Pro Tritium, G/G #100-004-576AT 4K91J15 $ 96.99 Sleek, No-Drag, Drop-In Extra Metal Prevents Front Sight Failure;
Pro Tritium, G/Y #100-004-206AT 4K91F09 $ 99.99 Gives Clean Sight Picture Fits Novak Dovetail
Ghost Ring Tritium, G/G #100-004-204AT 4K73H56 $ 76.99 Speeds your draw plus Heavy duty front sight is over-engineered with the needs of the
20, 21, 29, 30, 31, 32, 36 Classic Tritium G/G #100-014-494AT 4K83B34 $ 88.00 provides faster target ac- tactical operator in mind. Plain, black blade incorporates an integral
Pro Tritium, G/G #100-004-577AT 4K87F68 $ 90.99 quisition. Threaded, rear “gusset” of reinforcing metal between the base and the blade for
Pro Tritium, G/Y #100-004-207AT 4K82G39 $ 84.99 dovetail filler block allows additional strength that helps prevent breakage. Ideal choice for
fast changing of rear sights. pistols used during room clearing operations or close quarter battle.
Ghost Ring Tritium, G/G #100-004-205AT 4K73A56 $ 76.99 Front sights attach with a single locking screw. b a Fits in the standard Novak-style front dovetail cut. Pre-drilled for
42/43 Classic Tritium G/G #100-014-495AT 4K83B34 $ 88.00 SPECS: Steel, blued, matte finish. Sight heights same as factory. +0 sights vertical roll pin. a
b
All Glocks Rear Tritium, Green, .394 high w/.150" wide notch #100-004-572AT 4K53A05 $ 55.95 fit Glock 17, 19, 22, 23, 24, 34, 35. +1 sights fit Glock 20, 21, 29, 30, 31, 32, SPECS: Machined steel, matte black finish. Blade - .295" (7.3mm) high,
Front Tritium, Green, .315" high x .140" wide #100-004-569AT 4K42B22 $ 44.99 33, 36. Rear sights only can be used with factory fronts. Includes screws, .125" (3.1mm) wide. Fits standard .330" x 65° Novak front dovetail cut.
hex wrench and instructions. Includes stainless steel roll pin.
Front, Plain Serr, .165" high x .090" wide #100-004-570AT 4K23G64 $ 27.99
ARO-TEK NIGHT SIGHTS - Tritium-filled green vials provide an #206-000-044AT “Strong” Front Sight, 6K23N35������������ $ 24.99
CLASSIC TRITIUM SETS FOR OTHER PISTOLS - Drop-in replacements for factory sights have three-dot increased sight picture in low light conditions. Front and rear dots
Tritium insert system for optimal low-light visibility. Easy-to-see white rings surround each Tritium dot for are green. Front dot is brighter than the rear dots.
enhanced daytime visibility. #066-010-132AT +0 Night Sight Set, 6F88A48����������������� $ 97.99
SPECS: Machined steel, matte black finish. G/G - green front/green rear. G/Y - green front/yellow rear.
#100-014-506AT Beretta Nano Night Sight Set, G/G, 4K83D34�������������������������������������������������������������������������������������������������������������$ 88.00
#066-010-133AT +1 Night Sight Set, 6F88L48 ����������������� 97.99 EGW HANDGUN
#066-001-053AT Green Front Night Sight, 6F43N33������� 47.99
#100-014-502AT FNH FNP/FNX .45 ACP Night Sight Set, G/G, 4K83D34��������������������������������������������������������������������������������������������� 88.00
ARO-TEK TARGET SIGHTS - Low reflection, serrated fronts for
FIBER OPTIC FRONT SIGHT
#100-014-503AT FNH FNS/FNX 9mm Night Sight Set, G/G, 4K83P34 ������������������������������������������������������������������������������������������������� 88.00
sharp, clear target definition. Available with Black Rear/Serrated Enhanced Sight Picture
#100-014-505AT FNH FNS/FNX .40 Night Sight Set, G/G, 4K83D34����������������������������������������������������������������������������������������������������� 88.00
Front (BS) or 3-Dot (TD). In Bright Or Low Light
#100-014-498AT S&W M&P Shield Night Sight Set, G/G, 4K90L88������������������������������������������������������������������������������������������������������� 96.00
#066-011-102AT +0 BS Sight Set, 6F47J30���������������������� $ 49.99
#100-014-496AT Springfield XD/XDM Night Sight Set, G/G, 4K83J34������������������������������������������������������������������������������������������������� 88.00 Interchangeable, red or green, fiber optic insert glows brightly,
#066-011-122AT +0 TD Target Sight, 6F52P23���������������� 54.99 drawing your eye to the sight for fast pickup and improved shoot-
#100-004-190AT Springfield XD/XDM Night Sight Set, G/Y, 4K80P50 ������������������������������������������������������������������������������������������������� 83.99
ing performance. Open center gathers lots of light for a bright dot.
BOWIE TACTICAL SIGHTS FOR M&P - Designed for AmeriGlo by well-known M&P customizer David Bowie Three heights match most rear sights. Kimber and Para-Ord replace
for a sleek, ultra-low-profile fit on the Smith & Wesson M&P pistol. The rear sight notch is wider and deeper factory height blades. Fits factory dovetails. a b
than the factory notch to help you get the front sight centered ASAP. Rounded corners prevent snagging that SPECS: Steel, black, matte finish. Blade - .125" (3.2mm) wide. Models for
can impair the draw from concealment. S&W 65° x .330" x .070", 60° x .330" x .070" dovetails, plus Kimber Classic, and
SPECS: Machined steel, matte black finish. Front - .435" (11.1mm) long, .140" (3.6mm) wide, .230" (5.8mm) high. Rear - .875" Para-Ord Limited.
(22.2mm) long, .720" (18.3mm) wide rear face, .235" (6mm) overall height above slide, .164" x .115" notch. Available with green front/green rear sight V-NOTCHED REAR SIGHT KITS STK# 65° STK# 60° HEIGHT PRICE
(G/G) or green front/yellow rear (G/Y).
Complete Rear Sight Replacement Kit #296-065-160AT NA .160" 6B32C15 $ 34.99
#100-004-565AT Bowie Tactical Tritium Set, G/G, 4K89H21������������������������������������������������������������������������������������������������������������������ $ 92.99
#100-004-566AT Bowie Tactical Tritium Set, G/Y, 4K89M12������������������������������������������������������������������������������������������������������������������ 92.99 Complete rear sight kit replaces the #296-065-185AT #296-060-185AT .185" 6B32H15 $ 34.99
standard blade on your Smith & Wesson #296-065-200AT #296-060-200AT .200" 6B32G15 $ 34.99
revolver and provides a wide, V-shaped
notch. Enables faster pick up of the front sight, especially with fine STK# KIMBER STK# PARA HEIGHT PRICE
AMERIGLO bead and ball front sights. Adjustable for windage. a b #296-000-004AT NA .150" 6B32H15 $ 34.99
matching horizontal Tritium bar in the rear. Painted areas glow for SPECS: Kit contains sight blade, windage screw, nut, spring, and plug.
#296-000-006AT #296-000-008AT 6B32L15 $ 34.99
CAP SIGHT SET for GLOCK® several minutes after exposure to ambient light to give the shooter’s Available in three blade heights: .122" fits J-frame only; .160" & .196" fit .175"
eyes time to adapt in low light. Steel sight body has black nitride K, L, and N-frame. Blade heights measured from bottom to top of blade, SMITH & WESSON REVOLVER - Fits K, L and
Eye-Catching, Luminescent finish that matches your pistol and gives maximum durability and not including lug. N frame with pinned front blade. Interchange-
Sights With Tritium Front corrosion resistance. ab #078-003-002AT .122" V-Notch Sight Kit, J-Frame, able, red and green rods let you choose the best
SPECS: Steel, matte black nitride finish, lime green photoluminescent 8G18I53�������������������������������������������������������$ 19.99 color. ab
Combat Application Pistol accents. GL-614 fits Glock 17/19/22/23/24/26/27/33/34/35/37/38/39.
(CAP) sights have two bright, un- #078-003-004AT .160" V-Notch Sight Kit, K/L/Nframe, SPECS: Steel body, black, matte finish. 3/4" (19mm)
GL-615 fits 20/21/29/30/31/32/36. 8G21P84����������������������������������������������������� 24.99 long, .295" (7.5mm) high. .058" (1.5mm) diameter optic rod. Includes (1)
mistakable sight reference points that enable rapid target acquisi-
tion under all light conditions. Bright, lime green photoluminescent #100-010-622AT GL-614 CAP Sight Set, 4K69F66���������� $ 74.99 #078-003-005AT .196" V-Notch Sight Kit, K/L/Nframe, red and (1) green rod. Requires drilling for cross pin hole.
paint surrounds a self-illuminating Tritium dot in the front, with a #100-011-180AT GL-615 CAP Sight Set, 4K69N66���������� 74.99 8G21K84����������������������������������������������������� 24.99 #296-000-039AT S&W Fiber Optic Sight, 6B32P15���������� $ 34.99
SATISFACTION GUARANTEED
PAGE 296 SINCE 1939 Office/Tech: 641-623-5401
HEINIE SPECIALTY SEMI-AUTO HEINIE SPECIALTY SEMI-AUTO HIVIZ OVERMOLDED HANDGUN KENSIGHT
SLANTPRO® NIGHT SIGHTS RAMPED DOVETAIL FRONT SIGHT FRONT SIGHTS CLASSIC TARGET SIGHT
handgun sights
Low Mount With Tritium Dots A Bold, Easy-To-See Sight Improved Visibility In All Light Conditions Wire EDM Produced
White Dot
self-illuminating Tritium inserts provide Easy-To-Carry Shape Replacement front sights work in conjunction with factory rear & Function
a fast, easy-to-acquire sight picture in sights to give you fast sight acquisition in most light conditions.
Serrated-ramp fronts
all light conditions. The Tritium dot on the front sight aligns vertically Machined steel body uses overmolded technology to completely Provides consis- Standard
provide a perfect match for
with the single dot on the rear sight in a distinctive elongated figure cover and protect the light gathering, polymer LightPipe with an tent accuracy through
low mount, rear sights. Avail-
eight pattern. Wedge-shaped body has fully rounded edges and sets extra layer of clear polymer. Gunsmith fitting recommended. ab better production methods. Electro-discharge machined from
able with a plain Black Ramp or high-visibility White Dot. Installation
low in the slide for minimum profile. Offers an exceptionally smooth, requires machining of slide. .185" or .190" match Heinie 1911 and Bo- 4140 steel, heat-treated to Rc 38-40, then vacuum tempered to
snag-free draw for concealed carry and competition guns. Fine-line Mar BMCS rears. .200" front matches Heinie Browning HP Rear. a b S&W 317/66/67/625/629/657/686/696 - help retain these tolerances for many years to come. One-piece
serrations on front and rear blade eliminate glare for the best pos- SPECS: Steel, blue, matte finish. Blade - .126" (3.1mm) wide, .175" (4.4mm), Fits S&W revolvers that accept pinned front blade is cut from solid steel barstock, so it won’t fly apart when your
sible sight picture. Fits factory dovetail cuts; minor fitting may be .185" (4.6mm,) .190" (4.8mm), .200" (5mm) high, .500" (12.7mm) long. sights: models 317, 66, 67, 625, 629, 657, 686 shot matters most. Consistent, click-adjustable detents for windage
required. Supplied as a front/rear sight set. Standard SlantPro rear Dovetail - .60° x 300" x .060" with .002" taper. and 696 (except 686SSR, Classic Series and and elevation give precise repeatability. All models feature a full-
sight has a rear face that slants slightly forward and a gently curved Performance Center guns). Red light rod. serrated blade for better target recognition and a rebated square
front face. Ledge™ rear sight has a vertical, square-cut front face STOCK # HEIGHT STYLE PRICE SPECS: Steel, black, matte finish. .893" (22.6mm) notch for improved, “shadowless” front sight definition. BM #1 Deep
that provides extra purchase for one-handed slide racking. Straight #394-000-002AT .175" Black Ramp 4C23N30 $ 25.99 long. Notch features a .020" deeper sight notch and finer surface serra-
Eight - Tritium dot on the front sight aligns vertically with the single #394-309-185AT .185" Black Ramp 4C23I30 $ 25.99 #638-000-059AS Front Sight, Red, 8C33I71����������������������� $ 37.99 tions than standard model for easier front sight acquisition. White
Tritium dot on the rear sight in a distinctive, elongated “figure eight Dot model has rounded corners like the old Bo-Mar combat style
#394-309-190AT .190" Black Ramp 4C23K30 $ 25.99 adjustable sight, and features a white, .070" (1.8mm) diameter dot
pattern.” Sight sets are Straight Eight configuration unless indicated
otherwise in the table. 3D – Tritium dot on the front sight aligns #394-309-200AT .200" Black Ramp 4C23P30 $ 25.99 S&W J FRAME - Fits J frame revolvers with on each side of the notch.
horizontally with two dots on each side of the rear sight notch for #394-312-200AT .200" White Dot 4C25M39 $ 27.99 3" or shorter barrel and pinned front sight SPECS: 4140 steel, blue, matte finish. Blade - .750" (19mm) wide, .433"
an easy-to-see three dot sight picture. Supplied as a front/rear sight blade. Sight is not predrilled; gunsmith fit- (1mm) thick. Notch - .100" (2.5mm) deep (except BM #1 Deep Notch),
set. ab ting recommended. Available with red or .134" (3.3mm) wide.
SPECS: Steel, matte blue finish. Tritium inserts - Green. Rear Sight: .125" green light rod.
SPECS: Steel, black, matte finish. .712" (18.1mm)
(3.1mm) x .112" (2.8mm) notch. Other dimensions vary depending on
model. Front sight heights vary to regulate properly with rear sight.
KENSIGHT ADJUSTABLE NIGHT SIGHT long x .150" (3.8mm) high from top of barrel. STOCK # FITS DOVETAIL PRICE
#100-002-632AT BM #1 Standard 5A58C48 $ 64.99
Browning HP requires milling of slide. Glock/Glock Ledge – Rear Sight: #638-000-084AS S&W J-Frame Front Sight, Green,
Glowing Tritium Lamps Maximize #100-002-633AT BM #1 Deep Notch 5A60H02 $ 64.99
.250" high, .156" wide notch. Front Sight: .210" high. Fits all models except 8C33L71������������������������������������������������������� $ 37.99
Sight Visibility In Low Light #100-003-069AT BM #1 White Dot 5A60K02 $ 64.99
G36. S&W M&P Ledge – Rear Sight: .255" high, .140" wide notch. Front #638-000-083AS S&W J-Frame Front Sight, Red,
Sight: .180" high. Genuine, Trijicon, green Tritium 8C31K30����������������������������������������������������� 34.99 #100-002-634AT Kimber 1911 Adj. 5A58E48 $ 64.99
lamps feature polished quartz lenses for #100-002-635AT Elliason 5A46J17 $ 49.99
STOCK # FITS/STYLE PRICE improved sight recognition in low light, S&W K, L & N FRAME - Fits K, L & N frame #100-002-636AT Ruger® Mark II/MarkIII 5A60F02 $ 64.99
#394-000-014AT Browning HP 4C125C94 $ 138.99 plus appear as white dots for enhanced sight acquisition in bright models with pinned front sight blade (ex-
#394-102-318AT Glock 4C113M67 $ 125.99 sunlight as well. Sight bodies are EDM machined from 4140 steel, cept 686SSR). Gunsmith fitting recom-
then heat-treated to Rc 38-40 and vacuum tempered to retain the mended. Available with green or orange
#394-000-041AT Glock Ledge 4C126B08 $ 140.99
extra tight tolerances. Features precise click-adjustments for con- light rod.
#394-000-015AT Glock 36 4C113K67 $ 125.99 sistent changes in windage and elevation. Fine line serrations on rear SPECS: Steel, black, matte finish. .893" (22.7mm) long.
#394-000-023AT HK USP Compact 4C125A94 $ 138.99 blade surface cuts light reflection to enhance sight pick up. #638-000-002AS S&W K/L/N Frame Front Sight, Green, MARBLE RUGER® REVOLVER
#394-102-335AT SIG 225, 226, 228, 239 4C106K34 $ 118.99 SPECS: 4140 steel, blue, matte finish. .076" (1.9mm) diameter Tritium 8C32Q47���������������������������������������������������� $ 34.99
#394-000-010AT SIG 220, 229 4C106N34 $ 118.99 lamps. BM #1 retrofits pistols modified to accept the Bo-Mar BMCS rear
#638-000-023AS S&W K/L/N Frame Front Sight,
FIBER OPTIC FRONT SIGHT
sight. LPA fits Springfield Armory, Para-Ordnance, and Charles Daly 1911
#394-000-040AT S&W M&P Ledge 4C140A26 $ 154.99 Orange, 8C31F30������������������������������������ 34.99
Autos using the LPA TRT dovetail. Kimber Adjustable fits Kimber models Bright Fiber Optic Is Fast On Target For
#394-000-022AT Springfield XD 4C107K95 $ 118.99 with adjustable factory rear sight. Elliason fits Colt Anaconda, Diamond- Hunting & Action Shooting
back, Gold Cup, Officer’s Model Match, Python, Trooper, Ace, and others S&W CLASSIC, PERFORMANCE CENTER & DX MODELS - Inter-
originally fitted with either Accro or Elliason sights. changeable for different shooting distances Solid steel body with a bright, fiber
#100-002-627AT BM #1, 5A101P18 ��������������������������������� $ 104.99 and scenarios. Easy-to-see, bright red or optic rod gives your eye a quick-to-focus
green light rod makes target acquisition aiming point for fast target acquisition.
#100-002-628AT LPA, 5A98K20��������������������������������������� 104.99
HEINIE SPECIALTY S&W M&P #100-002-629AT Kimber Adjustable, 5A99H43 ����������� 104.99
fast and efficient. Specially machined base Brilliant orange or green rod is 9/16" long for excellent light gather-
is precision cut to fit factory ramp or base. ing. Drop-in replacement for factory sight. a b
SLANTPRO® QWIK™ SIGHT SET #100-003-407AT Elliason Adjustable, 5A99E43 ����������� 104.99 Fits S&W Classic, Performance Center, and SPECS: Steel, blue, matte finish. .150" (3.8mm) blade width. Height/fits
DX models. - .332" fits Super Redhawk .44 Mag. and GP-100® .357 Mag. .390" fits
“No-Snag” Sight Set SPECS: Steel, black, matte finish. .813" (20.6mm) Redhawk® .44 Mag., Super Redhawk .480 and Blackhawk® Hunter.
Enables Quick Target long. Available in .208", .250", and .310" heights.
Acquisition Under HIVIZ FIBER OPTIC HANDGUN #638-000-053AS .208" Front Sight, Green, 8C31G30���� $ 34.99 STK# ORANGE STK# GRN HEIGHT PRICE
Stress #638-000-051AS .250" Front Sight, Green, 8C31C30 ���� 34.99
Low-profile, fixed rear sight has an extra-wide notch that aids
FRONT SIGHTS #638-000-052AS .250" Front Sight, Red, 8C31I30 ���������� 34.99
#579-000-029AT #579-000-032AT .332" 9G17A20 $ 19.99
9G17H19 $ 19.99
#579-000-030AT #579-000-033AT .390"
in fast acquisition and alignment with the front blade. Excellent for Improves Sight Visibility For Fast #638-000-055AS .310" Front Sight, Green, 8C31F30������ 34.99
a self-defense or carry gun, as well as for competition or to give Target Acquisition
a shooter with aging eyes an extra edge. Sits low in the slide for RUGER® LCR™ - Drop-in replacement
minimal profile, and wedge-shaped body has rounded edges to aid Direct replacements for factory sights use light-gathering Lit- for factory front sight has contoured base
in a smooth, snag-free draw. Self-illuminating, green Tritium inserts ePipe fiber optic rods that help you acquire the sights and get on to match the barrel radius for a snug fit
provide a fast, easy-to-acquire sight picture in dim light. Easy-to- target fast. The bright, eye-catching dots really stand out and give you and streamlined appearance. Secures to
aquire Straight Eight (S8) configuration has you align the front sight a sight picture that’s fast-to-pick-up in poorly lit surroundings, bright factory sight mounting stub with included
dot vertically with the single dot under the rear sight notch in a daylight, or anything in between. Machined steel sight bodies protect steel cross-pin. SPRINGFIELD XD - Precision machined to
simple, distinctive, elongated figure eight pattern. Fine-line serra- the LitePipes from impact and blend neatly into the slide. Comes with SPECS: Steel, black, matte finish. Red or green light rod. .850" (21.6mm) fit the factory dovetail; will not shift, even
tions on the rear of the blades helps eliminate glare in bright light. a set of interchangeable red and green LitePipes that let you change long. under the heaviest recoil. Overmolded with
Rear sight has a rear face that slants slightly forward. Ledge™-style the dot color and size to suit your specific shooting conditions. a b clear resin to protect the light-gathering
SPECS: Steel, black matte finish, with an assortment of interchangeable #638-000-192AS LCR Front Sight, Red, 8C34L58������������ $ 39.99 rod, prevents snagging on clothes or holster.
vertical, square-cut front face enables easy one-handed slide rack-
ing. Fits factory sight dovetails. ab red and green fiber optic inserts. All models fit factory dovetails. S&W #638-000-193AS LCR Front Sight, Green, 8C34I58�������� 39.99 Standard .090" front sight diameter allows
SPECS: Steel, matte black finish. Rear Sight Notch - .156" wide x .120" M&P 9L fits Smith & Wesson M&P chambered in 9mm with 5" barrel. accurate shooting under the most demand-
deep. Front sight heights vary to regulate properly with rear sight. Minor .247" (6.3mm) high, .4" (10.2mm) wide. Includes an opaque, non-fiber- SIG P220/P225/P226/P228/P229/P239 - CNC machined base ing conditions. Fits Springfield XD models.
fitting required; dovetails are cut .002"-.003" oversized for secure fit in optic white rod. installs firmly in the factory dovetail. Smooth edges won’t catch Available in red or green.
factory sight cuts. #638-000-189AT S&W M&P 9L Front Sight, 8C30A37���� $ 34.99 on clothing or holster. Fits P220, P225, P226, P228, P229 and P239. SPECS: Steel, black, matte finish. .790" (20mm) long.
#394-000-062AT M&P Qwik S8/Ledge Night Sight Set, #638-000-195AT Walther P22/P22Q Front Sight, SPECS: Steel, black, matte finish. .793" (20.1mm) long. #638-000-080AT Front Sight, Red, 8C28H36 ������������������ $ 34.99
4C140G26������������������������������������������������ $ 154.99 8C29D61���������������������������������������������������� 32.99 #638-000-057AS Front Sight, Red, 8C31E46��������������������� $ 37.99 #638-000-079AT Front Sight, Green, 8C30A54���������������� 36.99
Enhances Accuracy For Target & FOR POPULAR HANDGUNS Always Rugged, Low-Profile
Practical Shooting “On”; No Batteries, Combat Sights Maximize
No Charging Available Light For Fast
Click-adjustable rear sight works
with your pistol’s existing front sight Really “shines” when other sights are Targeting In All Light
to give you a precise sight picture for useless. No switch to turn on, no batter- Conditions
competition and target shooting. Two ies to wear out. Both front and rear blades
Streamlined & Compact Plus Full Adjustability have their own green Tritium gas light
white dots (WD) on either side of the notch help you get the front Low-profile, fixed sights for Taurus 24/7 OSS pistols have glow-
sight blade neatly centered quickly. Some models also available with Low profile, sights feature micrometric windage/elevation ad- source and provide a green/green (grn/ ing fiber optic or Tritium inserts that help you see the sights and
a solid white outline (WO) around the notch or plain black (PB) with justments with hardened click screws and a tapered dovetail for a grn), 3-dot sight picture. Some models also available in green/yel- get on target fast, even in low-light or high-stress situations. Same
no white markings. Machined from solid steel with a tapered dovetail strong lock into the existing groove. Drop-in front and rear replace- low (grn/yel) and green/orange (grn/orng). The front sight is always height as original factory sights, and cut for drop-in fit to factory
that locks securely into the pistol’s existing rear sight slot for a drop- ments fit factory dovetails; minor gunsmithing or fitting maybe re- green for contrast with the rear sight. Unaffected by weather, gun dovetails. Streamlined design combines the compact profile of No-
in installation - no machining or milling required. Hardened windage quired, especially for front sight. Offers the classic, instinctive three- solvents or oils. Used by NATO, U.S., and Israeli armies. Also ideal for vak’s Lo-Mount rear sights with a recessed rear face and wide notch
and elevation click adjustment screws mean that your setting stays dot sight picture, with a choice of white dots (WD) or fiber optic law enforcement and others requiring accuracy in low-light condi- that guide your eye quickly to the front sight. Precision-machined
locked in. Browning Hi Power also available in a fiber optic (F/O) set dots (FO). Unless otherwise noted below, FO sights come with 1 red tions. Contains both front and rear sights. Rear sights either replace steel construction, with non-glare matte black finish, handles the
with two green dots on rear sight, red dot on front sight. and 1 green set of interchangeable inserts so you can choose the the original rear entirely or, as on S&W revolvers, a new rear leaf, rigors of tactical operations and daily carry. Sloping top surface,
SPECS: Machined steel, matte black oxide finish. Includes Allen wrench color or color combination that's best for your eyes. Novak 1911 sets screw and nut are provided. Front sights either replace the original rounded corners, and beveled edges won’t snag on clothing or
and adjustment screwdriver. have standard Novak .495" x 65° rear dovetail and .330" x 65° front (1911 Auto); slip over and are pinned to the original blade (most other holster. Horizontal ridge on the front of the rear sight aids in one-
dovetail. Novak also available with a plain black rear sight and a red autos); or replace the factory colored insert (S&W Autos). Factory handed slide racking and gives your pistol a uniquely aggressive
STOCK # FITS STYLE PRICE front sight (PB/R). Carry sights provide full windage/elevation ad- warranty on TRU-DOT sights to the original purchaser for 12 years. look. Rear sights have a dot on each side of the notch; front sights
#100-016-360AT Beretta 92/96/98/M9/ WD 4D89F95 $ 89.95 justability and are designed specifically for concealed-carry pistols, SPECS: Blued steel with Tritium inserts. Sights marked Adj. fit guns origi- have one dot. Light-gathering properties of fiber optic (F/O) rods
Brigadier/90-Two with neatly beveled edges that won't snag on clothing or holster. nally equipped with factory, adjustable sights. Sights marked Fxd. fit guns make maximum use of ambient light and provide a bright glow that
#100-016-362AT Browning HP Sport WD 4D89C95 $ 89.95 SPECS: Machined steel, matte black oxide finish. originally equipped with factory, fixed/non- adjustable sights. S&W mod- stands out against dark backgrounds. a b
els will NOT fit guns originally equipped with plastic sights. SPECS: Machined steel, matte black finish, with fiber optic inserts. Fits
#100-016-361AT Browning HP Vigilante WD 4D89J95 $ 89.95 STOCK # FITS TYPE PRICE factory dovetails on Taurus 24/7 OSS pistols with 51/4" barrel; minor fit-
#100-017-340AT Browning Hi Power F/O Set 4D159K99 $ 159.99 #100-016-349AT Beretta Brigadier WD 4D109N95 $ 109.95 ting may be needed. Front - .595" (1.5cm) long, .125" (3.2mm) wide, .20"
#100-016-358AT Colt 1911A1 Gov’t Model WD 4D89N95 $ 89.95 STOCK # FITS PRICE
#100-016-354AT Beretta 92/96 WD 4D109C95 $ 109.95 (5.1mm) high. Rear - .95" (2.4cm) long, .615" (1.6cm) wide, with .135"
4D89D99 $ 89.99 #387-302-762AT Beretta 92F (Fxd. Lo-Profile) 2B91I95 $ 101.35 (3.4mm) wide notch.
#100-017-337AT Colt 1911A1 Gov’t Model WO #100-016-355AT Browning GP WD 4D109Q95 $ 109.95
#100-017-336AT Colt 1911A1 Gov’t Model PB 4D89N99 $ 89.99 #387-000-066AT Beretta PX4 Storm F/G Models (Fxd.) 2B91N83 $ 101.35 #662-000-087AT Taurus 24/7 F/O Rear Sight, Green,
#100-016-352AT Browning Vigilante WD 4D109I95 $ 109.95
4D89G95 $ 89.95 #387-303-785AT Browning HP (Fxd. Dovetail Frt/Rear) 2B91F83 $ 101.35 2F52K38������������������������������������������������������ $ 58.99
#100-016-359AT Colt 1911 70/80/90 Series WD #100-016-350AT Colt 1911A1 70 Series WD 4D109I95 $ 109.95
4D89A99 $ 89.99 #387-307-724AT Glock 9mm & .40 cal. (Fxd. grn/grn) 2B75A34 $ 81.90 #662-000-088AT Taurus 24/7 F/O Front Sight, Red,
#100-017-339AT Colt 1911 70/80/90 Series WO #100-016-341AT Colt 1911A1 70 Series FO 4D159M95 $ 159.95
#387-102-220AT Glock 10mm & .45 cal. (Fxd. grn/grn) 2B78C52 $ 83.35 2F38A54����������������������������������������������������� 41.99
#100-017-338AT Colt 1911 70/80/90 Series PB 4D89J99 $ 89.99 #100-016-351AT Colt 1911A1 80 Series WD 4D109I95 $ 109.95
4D89G95 $ 89.95 #387-000-058AT Glock 10mm & .45 cal. (Fxd. grn/yel) 2B79E29 $ 87.50
#100-016-365AT CZ 75 (Brno Old Model) WD #100-016-342AT Colt 1911A1 80 Series FO 4D159J95 $ 159.95
4D89N95 $ 89.95 #387-307-726AT Glock 26, 27 (Fxd. grn/grn) 2B77E36 $ 87.50
#100-016-366AT CZ 75 & 85 (New Model) WD 100-019-886AT Bo-Mar-Style Rear Only PB 4D72Q43 $ 79.95
4D89M95 $ 89.95 #387-000-002AT Glock 9mm/.40 (Fxd. grn/orng) 2B77D36 $ 87.50
#100-016-364AT Glock 17-35 Series WD #100-018-336AT Novak 1911 Govt Model WD 4D106Q63 $ 119.99
4D89N99 $ 89.99 #387-000-004AT Glock 26, 27 (Fxd. grn/orng) 2B77M36 $ 87.50
#100-017-335AT Glock 17-35 Series WO #100-018-338AT Novak 1911 Govt Model FO 4D126K73 $ 139.95
4D89Q99 $ 89.99 #387-000-005AT Glock 9mm & .40 cal. (Fxd. grn/yel) 2B79C29 $ 87.50
#100-017-334AT Glock 17-35 Series PB #100-018-337AT Novak 1911 Govt Model PB/R 4D106M63 $ 119.95
#387-000-006AT Glock 10mm & .45 cal. (Fxd. grn/yel) 2B79N29 $ 87.50 STOCK # FITS PRICE
#100-016-368AT Ruger Mark II WD 4D89A95 $ 89.95 #100-016-346AT CZ 75B//85B (Current Production) WD 4D109C95 $ 109.95
#387-000-007AT Glock 26, 27 (Fxd. grn/yel) 2B79D29 $ 87.50 #387-000-042AT S&W K, L & N Frame except Mtn. Guns 2B91K83 $ 101.35
#100-016-363AT Sig Sauer P Series WD 4D89L95 $ 89.95 #100-016-353AT CZ 75 Old Models ("Pre-B" Brno) WD 4D109C95 $ 109.95
#387-000-012AT Glock 17, 19, 20, 21, 22, 23 (Adj.) 2B151I98 $ 162.60 (Adj. factory rear & pin-on front)
#100-016-370AT S&W Revolver WD 4D119N95 $ 119.95 #100-016-356AT Glock 17/19/20/21/22/23/25/26/27/ WD 4D109P95 $ 109.95 2B89E72 $ 101.35
#387-000-089AT Glock 42/43 (Fxd grn/grn) 2B86E80 $ 95.99 #387-313-200AT S&W K, L & N Frame (Adj.) Use Loctite
#100-016-367AT Taurus PT-92/-58/-100 WD 4D89C95 $ 89.95 28/29/30/31/32 #609
#387-000-097AT Glock 42/43 REAR ONLY (Fxd grn) 2B54G65 $ 59.99
#100-016-345AT Glock 17/19/20/21/23/25/26/27/2 FO 4D159B95 $ 159.95 #387-313-173AT S&W 3900/5900/6900 (Fxd Novak 2B91K83 $ 101.35
#387-308-715AT H&K P7, P-13 Series (Fxd.) 2B91E95 $ 101.35
9/30/31/32 rear)
#387-215-160AT H&K USP (Adj., full size tactical) 2B151Q98 $ 162.60
#100-016-347AT Sig P220 WD 4D109Q95 $ 109.95 #387-174-420AT S&W Sigma (Fxd) 2B91G95 $ 101.35
#387-000-014AT H&K USP (Fxd., full size grn/orng) 2B91H83 $ 101.35
COMBAT CARRY
KENSIGHT #100-016-343AT Sig 220 FO 4D159P95 $ 159.95
#387-115-160AT H&K USP, (Fxd., full size) 2B91I95 $ 101.35 #387-000-024AT Springfield XD 9mm/.40 cal., 4"/5" 2B86K80 $ 95.99
#100-016-348AT Sig P229 WD 4D109F95 $ 109.95 bbl (Fxd. grn/grn)
ADJUSTABLE REAR SIGHT #100-016-344AT Sig 229 FO 4D159G95 $ 159.95
#387-000-017AT H&K USP (Fxd., compact grn/yel) 2B91E83 $ 101.35
#387-000-048AT Springfield XD 9mm/.40 cal., 4"/5" 2B86P80 $ 95.99
#387-115-170AT H&K USP, (Fxd., compact) 2B91H83 $ 101.35
Rounded Blade Edges Won’t Snag On #100-017-341AT Smith & Wesson M&P WD 4D134K99 $ 134.99 bbl (Fxd. grn/yel)
#387-000-043AT H&K 2000, (Fxd.) 2B91D83 $ 101.35
Clothing Or Holsters #100-017-342AT Smith & Wesson M&P WD rear/ 4D117C99 $ 117.99 #387-000-049AT Springfield XD 9mm/.40 cal., 4"/5" 2B86J80 $ 95.99
FO front #387-000-044AT Kahr K-9, K-40 & K-45 (Fxs.) Post 11/04 2B93E97 $ 102.45
bbl (Fxd. grn/orng)
Enjoy the accuracy of a fully adjust- #387-000-008AT Kimber Full size (Fxd.) 7H107M20 $ 119.99
able, competition-style rear sight in a #387-000-050AT Springfield XD .45 cal. (Fxd.grn/yel) 2B86B80 $ 95.99
#387-000-009AT Kimber Cust. Target (Adj.) 7H174K10 $ 179.99
package suitable for daily carry. Beveled edges on sight body and ra- #387-000-051AT Springfield XD .45 cal. (Fxd. grn/orng) 2B86B42 $ 95.99
#387-000-063AT Kimber Warrior/Raptor (Fxd. grn/grn) 7H119M72 $ 129.99
diused corners on blade minimize chances of snagging on clothing #387-188-000AT Walther P99, (Fxd.) 2B91N83 $ 101.35
or holster. Blade, sight body, and base are EDM-wire machined from NOVAK BROWNING HI-POWER #387-311-790AT Ruger® P-85/89® (Fxd.) 2B91G83 $ 101.35
#387-000-087AT Springfield XD(M) 4"/5" (Fxd. grn/grn) 2B86A80 $ 95.99
high-grade, 4140 billet steel, then heat-treated to Rc 28-32 to retain #387-791-901AT Ruger P90™/91™/93™/95™ (Fxd.) 2B91J95 $ 101.35
the extra-tight tolerances. Front hinge pin is hardened to Rc 60 for LO-MOUNT REAR SIGHT #387-109-940AT Ruger P-94™ (Fxd.) 2B91M83 $ 101.35
reliable, long-lasting service without breakage. Fine serrations on No-Snag “Angle” Design; #387-000-018AT Ruger Super Redhawk® GP100® (Adj.) 2B134D69 $ 146.85 MEPROLIGHT FRONT SIGHTS - Single, front sights only. Re- place
the rear sight blade surface reduce light reflection to enhance sight damaged units or stake-on models after refinishing.
pick up in all light conditions. Consistent, click adjustable detents for Fast Sight Picture #387-000-019AT Sig P220, 225, 226, 228 (Fxd. grn/orng) 2B91F83 $ 101.35
SPECS: Steel body, blue. Self-luminous lamp. Sights marked Adj. are for
windage and elevation provide precise, repeatable settings. #387-000-020AT Sig P220, 225, 226, 228, 229 9mm/357 2B93D97 $ 101.35 use with Meprolight Adjustable rear sights; all others are used with Mep-
Smooth, low-profile rear sight has an angled top surface with
SPECS: 4140 steel, blued, matte finish. BM #1 - Fits pistols with the Bo- mitered edges that won’t snag on holsters or clothes. Rebated blade SIG (Fxd. grn/yel) rolight Fixed sights.
Mar BMCS rear sight dovetail. BM #1 Oversized – Dovetail is .010" over- fights glare. Helps aging eyes see front sight more easily. Available #387-000-021AT Sig P220, 226 (Adj.) 2B153J49 $ 164.60
sized to allow custom-fitting in loose Bo-Mar BMCS slide cuts. LPA Cut in Plain Black (PB) or Tritium night sight with two self-illuminating #387-000-022AT Sig P229, 239 (Fxd. grn/orng) 2B91E83 $ 101.35 STOCK # FITS PRICE
1911 - Fits Springfield Armory, Para-Ordnance, Nowlin, High Standard, Tritium dots for easy sight acquisition in low light conditions. a b #387-000-023AT Sig P229 .40 Cal., 239 (Fxd. grn/yel) 2B91D83 $ 101.35 #387-500-112AT 1911 Auto., Adj. (Narrow Tenon) 2B39C95 $ 43.15
Olympic Arms, and Charles Daly 1911 Auto pistols with the LPA slide cut SPECS: Machined steel, matte black finish. Fits later models with external,
for adjustable sights. #387-101-290AT Sig P229 (Fxd.) 2B36A56 $ 39.75 #387-102-240AT Glock 17, 19, 20, 21, 22, 23, 26, 27 2B32P61 $ 35.15
side extractor only. Use with .175"-.215" high front sight. Requires milling
#100-002-637AT BM #1 Rear Sight, 5A61H50������������������ $ 67.99 of slide; use 65° x.495" dovetail cutter. PB has .125" (3.2mm) wide notch; #387-312-710AT Sig P-220, 225, 226, 228, 239 2B91H83 $ 101.35 29, 30, 31, 32, 33 (.170" high)
#100-004-082AT BM #1 Oversized Rear Sight, Tritium has .123" (3.9mm) wide notch. (Dovetail) #387-000-096AT Glock 42/43 2B86I80 $ 95.99
5A62J70 ������������������������������������������������������ 69.99 #662-260-009AT PB Lo-Mount Sight, 2F32L21���������������� $ 34.99 #387-000-070AT S&W M&P 9mm/.40 (Fxd. grn/grn) 2B91B83 $ 101.35 #387-000-010AT Ruger SP101® .38/357 2B50J11 $ 54.65
#100-002-638AT LPA Cut 1911 Rear Sight, 5A60H56 ���� 64.99 #662-002-007AT Tritium Lo-Mount Sight, 2F84P57 ������ 89.99 #387-000-069AT S&W 1911 Full Size (Fxd. grn/grn) 2B91G83 $ 101.35 #387-000-011AT S&W J-Frame 17/8" barrel 2B50B11 $ 54.65
SATISFACTION GUARANTEED
PAGE 298 SINCE 1939 Office/Tech: 641-623-5401
NOVAK SEMI-AUTO MGW SEMI-AUTO NOVAK S&W M&P NOVAK RUGER® LCR™
CARRY REAR SIGHT DOVETAIL FRONT SIGHT BLANK EXTREME DUTY SIGHTS MEGA DOT® FRONT SIGHTS
handgun sights
Low Profile; Fits Factory Dovetails; Strong & Ready-To-Shape For Low-Profile Mounting; Fully Adjustable; High-Visibility Fiber Optic Or
Plain Black
Great Sight Picture Custom Applications Four Styles To Choose From Tritium Inserts For All Light
Exclusive, wedge-shaped, “Concealed Carry” Long enough and high enough for most cus- Conditions
Rugged, machined steel front and rear
design puts the sight body and blade close to the tom pistol applications. Dovetail installation is sights let you upgrade your M&P with a High-visibility replacement
slide for a snag-free draw and smooth, comfort- much stronger than staking, so the front sight stays precise, versatile, windage- and elevation- front sight comes with a bright,
able carry. Highly visible rear blade with re- bated 2 Dot put under heavy recoil or extreme use. Drilled for adjustable sight system that’s easy to install light-gathering fiber optic rod or a self-illuminating Tritium insert
notch gives fast, glare-free sight pickup for more accurate instinc- 1
/16" diameter roll pin for more “hold”. Blues easily. ab because it fits the factory dovetails. Low-profile design similar to to provide immediate sight acquisition in a broad range of light
tive shooting. Available in Plain Black (PB), with two White Dots (2 SPECS: Steel, blued. Blade - .268" (6.8mm) high, .128" (3.2mm) wide, .640" Novak’s famous Lo-Mount sights has rugged, machined steel con- conditions. The eye is immediately drawn to the big, .125" diameter
Dot), or Tritium night sight ith two self-illuminating Tritium dots for (16mm) long. Dovetail - 65° x .330" x .075". struction to stand up to the rigors of tactical operations and daily dot for fast, instinctive targeting. Choose from green or red Fiber
easy sight acquisition in low light conditions. a b #584-012-268AT Dovetail Front Sight, 4H10C83�������������$ 13.08 carry. Smooth, rounded and beveled edges minimize risk of catch- Optic (F/O) or green Tritium night sight configuration. Precision-
SPECS: Machined steel, blued, matte finish. Glock® - .125" (3.1mm) wide ing or snagging. Set screw allows drift adjustment for windage; ele- machined steel body provides maximum protection of the inserts.
notch. Rear Blade - .713" (18mm) wide x .195" (4.9mm) high. Fits factory vation screw positively stops and audibly clicks for easy fine-tuning. Installs on factory sight lug. Some fitting required; gunsmith instal-
dovetail in all models of Glock pistols. Requires Novak Glock Front Sights, Rear sights have non-serrated, recessed rear face with .120" wide lation recommended. a b
listed elsewhere. Beretta .150" (3.8mm) wide notch. Rear Blade - .535" notch that correctly regulates with front sight. Front sight’s gently SPECS: Steel, blued, matte finish. .875" (22.2mm) long, .145" (3.7mm) wide
(13.6mm) wide x .320" (8.1mm) high. Fits factory dovetails on Beretta 92, NOVAK RUGER® SR9® sloping rear face and rounded front provide a clear sight picture blade, .225" (5.7mm) wide base, .265" (6.7mm) high. Fiber Optic (F/O) -
Brigadier, and Elite II ; may require minor fitting. Uses existing front sights. and resists snagging during the draw. Front and rear sights are sold red or green, .125" O.D. Tritium - green .05" O.D. insert, white ring .125"
#662-017-001AT PB Glock Sight, 2F32H11������������������������ $ 34.99 NIGHT SIGHTS separately, so you can mix and match styles to suit your shooting OD. Fitting required; gunsmith installation recommended.
#662-017-003AT WD Glock Sight, 2F36L70���������������������� 39.99 application. Available in Plain Black, Fiber Optic Dot, and Tritium Dot #662-000-046AT LCR Mega Dot F/O Front Sight, Green,
Tritium Inserts For Fast Targeting In models. Dot styles have a dot on each side of the rear notch and one
#662-001-011AT Trit. Glock Sight, 2F84A57 �������������������� 89.99 2F45I16 ������������������������������������������������������ $ 49.99
Low-Light on the rear face of the front sight. Non-glare matte black finish. a b
#662-000-007AT WD Beretta Sight, 2F37A64������������������ 41.99 #662-000-097AT LCR Mega Dot F/O Front Sight, Red,
Self-illuminating Tritium inserts glow bright green in SPECS: Steel, matte black finish. Front and rear sights available separately.
dim light to help you see the sights and get on target fast. Rear sight PB = Plain Black; FO = Fiber Optic; TR = Tritium. 2F44F99������������������������������������������������������ 44.99
has a dot on each side of the notch, front sight has one dot, for an #662-000-096AT LCR Mega Dot Front Sight, Tritium,
#662-000-068AT PB Rear Sight, 2F64K26������������������������� $ 69.99
intuitive, horizontal three-dot sight picture that’s easy to acquire, 2F49N97���������������������������������������������������� 52.99
#662-000-070AT F/O Rear Sight, 2F75L28������������������������ 81.99
even under stress. White circles around the inserts retain the daylight
NOVAK S&W M&P visibility advantage or your SR9’s original factory white dot sights. #662-000-071AT TR Rear Sight, 2F110N17������������������������ 119.99
#662-000-075AT F/O Front Sight, 2F38Q54 �������������������� 41.99
LO-MOUNT FIBER OPTIC SIGHTS Same height as factory sights, and cut for drop-in installation in fac-
tory dovetails. Both sights are drift-adjustable for windage; rear sight
Fixed Combat Sights Maximize elevation is fixed. Recessed rear face and wide notch on rear sight SDM S&W REVOLVER
Available Light For Fast Targeting help guide your eye quickly to the front sight. Forward sloping top
surface, beveled edges, and rounded corners won’t snag on cloth- SUPER SIGHT
In All Light Conditions ing or holster. Front sight is slightly longer than factory sight but will NOVAK Super Bright, Fiber Optic
fit holsters designed to accept the stock pistol. Precision-machined
Low-profile fixed sights for
Smith & Wesson M&P pistol use steel construction, with non-glare matte black finish, handles the FIBER OPTIC SIGHTS for GLOCK® Offers A Clear Sight Picture For
rigors of daily carry and tactical operations. a b Hunting & Action Shooting
glowing fiber optic rods to help you Steel Replacement Sights For All Light Conditions
get on target fast, even in low-light or high-stress situations. Makes SPECS: Machined steel, matte black finish. Fits factory dovetails on Ruger One inch long, fiber optic rod
maximum use of available light so sights stand out against dark tar- SR9 pistol; rear sight also fits SR9c and SR40. Minor fitting may be needed. Snag-free, steel front and rear fiber optic gathers lots of light, creating an
gets and backgrounds. Same height as original factory sights, and #662-000-100AT SR9 Rear Night Sight, 2F84C45 ���������� $ 91.99 sights enable you to find the target quickly exceptionally bright sight picture even in low light conditions. Base
cut for drop-in fit to factory dovetails—no milling of slide required. #662-000-101AT SR9 Front Night Sight, 2F52L83���������� 54.95 in all types of light conditions. Front sights is wire EDM’d with 50 lpi machined serrations on the rear face. Extra
Precision-machined, all-steel construction, with non-glare matte replace Glock factory sights with a slightly height works with higher than factory, aftermarket rear sights. Works
black finish, handles the rigors of tactical operations and daily carry. angled front edge to prevent snagging. Tac- best with Millett .360" and .410" rear sights. Pin fits all Smith & Wes-
Sloping tops, rounded corners, and beveled edges won’t snag on tical Front Sight covers both sides of light in- son revolvers with pinned front sight. Classic fits S&W Classic and
clothing or holster. Front sight has one red dot and is .190" high. sert for maximum concealability. Rear Sights DX revolvers with interchangeable front sights. a b
Rear sight has a green dot on each side of the notch; setscrew allows
drift adjustment for windage. Wide, .145" notch aids fast acquisition
STI SEMI AUTO ADJUSTABLE are CNC machined to fit the factory dovetail
and include a setscrew; machined light channels provide optimum
SPECS: Steel base, black, matte finish. 1" (2.5cm) long, .125" (3.17mm)
blade width, Pin - .250" (6.35mm) and .300" (7.62mm) high. Classic -
of front sight. Exceptionally low profile - only .236" above slide at REAR SIGHT light gathering. Comes with .060" diameter light inserts. Edges are .250" high only.
the highest point. Recessed rear face helps draw the eye quickly to rounded to prevent drag on holsters or clothing. a b #864-000-005AT .250" Pin Red Sight, 4F26H38���������������$ 28.95
the front sight. ab Low Profile, Easy Carry, Fits Most SPECS: Steel, blued, matte finish. Tactical Front - is .63" (1.6cm) long, #864-000-006AT .250" Pin Green Sight, 4F26N38����������� 28.95
SPECS: Machined steel, matte black finish, with fiber optic inserts. Fits Semi-Auto Pistols .12" (.3cm) wide. Rear Sights are .66" (1.6cm) long, .72" (1.8cm) wide, .19"
factory dovetails on S&W M&P pistols; minor fitting may be needed. (.48cm) high, with .13" (3.3cm) wide notch. #864-110-001AT .300" Pin Red Sight, 4F26B38��������������� 28.95
Flat blade with anti-glare serrations #662-000-047AT Tactical Front Sight, Red, 2F38E54�������$ 41.99 #864-110-003AT .300" Pin Green Sight, 4F26J38 ����������� 28.95
#662-000-084AT Fiber Optic Front Sight for M&P,
gives ideal sight picture for target or carry; contoured, resists snag- #864-000-003AT .250" Classic Red Sight, 4F31A91 ��������� 35.95
2F38D54���������������������������������������������������� $ 41.99 #662-000-051AT Tactical Front Sight, Green,
ging. Low profile for quick alignment. Machined, solid steel; adjusts
#662-000-081AT Fiber Optic Rear Sight for M&P, for windage and elevation. a b 2F38I54������������������������������������������������������� 41.99 #864-000-004AT .250" Classic Green Sight, 4F31B91 ����� 35.95
2F45K87������������������������������������������������������ 49.99 SPECS: Steel, matte, black finish. Rear blade - .434" (11mm) high, .762" #662-000-050AT .060" Rear Sight, Red, 2F45M87����������� 49.99
(19.3mm) wide. Notch - .110" (2.8mm) wide. Installation requires milling, #662-000-054AT .060" Rear Sight, Green, 2F45F87��������� 49.99
drilling and tapping of slide. Fits BM-#1 cut.
#791-256-000AT STI Adjustable Sight, 1G62M75������������ $ 66.99
TRIJICON® FRONT SIGHT
NOVAK SEMI-AUTO Replace Lost Or Removed Sights
DOVETAIL MOUNT FRONT SIGHT NOVAK FRONT SIGHT for GLOCK ®
Front sights only, to replace those knocked off
Strong, Easily Changed Sights For Autos REAR SIGHT DOVETAIL INTERCHANGEABILITY Drop-In Replacement For or removed for refinishing. ab
All Models Of Glock Pistols SPECS: Steel body, blued. Self-luminous lamp.
The term Bo-Mar Cut® is a registered trademark of Bo-Mar Tool
Dovetail mounted, roll-pinned sights resist And Manufacturing Co., Inc. We carry rear sights from various other
shoot-off. Easily changed for different loads or manufacturers that fit in cuts identical to the Bo-Mar cut. To avoid Easy-to-install, all-steel, replacement sights STOCK # FITS PRICE
conditions. Full instructions. ab trademark infringement, you will see the following sight cuts, along fit right in the factory dovetail. White Dot model #892-500-100AT 1911 Auto Govt. narrow 2H60F47 $ 63.99
SPECS: Blued steel, .295" (7.5mm) high x .125" with the symbol that will represent that specific sight, listed in the SPECS matches the Novak 3 Dot Glock Rear Sight. Tri- #892-500-101AT 1911 Auto Govt. wide 2H61J99 $ 61.99
(3.17mm) wide blade. Requires milling 65° x .330" section of rear sights from manufacturers other than Bo-Mar. tium Dot matches the Novak 3 Dot Glock Rear Sight and Glock
dovetail in slide. .075 size for Govt. Mod., Com- factory Tritium dot or bar rear sight. ab #892-501-101AT 1911 Auto Commander wide 2H67F99 $ 67.99
mander, S&W 645/745/59. .060 for Colt Officers ACP, S&W mini-guns, SIGHT CUT DOVETAIL SYMBOL SPECS: Fits all models of Glock semi-auto pistols. Machined steel, blued. #892-502-101AT 1911 Auto Officers wide 2H68M99 $ 68.99
Browning Hi-Power, CZ-75. Bo-Mar BMCS 60˚ x .359" x .100" BM-#1 .134" wide, .185" (4.7mm) high. #892-505-000AT Glock (all models) 2H50E51 $ 54.99
#662-645-075AT .075 Novak Front Sight, 2F16F08��������� $ 17.99 Bo-Mar BMCS-2 60˚ x .359" x .100" BM-#2 #662-817-103AT White Dot Sight, 2F26H97��������������������� $ 27.99 #892-506-225AT Sig 225/226/228 2H60E01 $ 63.99
#662-645-060AT .060 Novak Front Sight, 2F16K08��������� 17.99 #662-005-004AT Tritium Dot Sight, 2F50K58������������������� 54.99 #892-506-220AT Sig 220/229 2H66G99 $ 66.99
Classic, McGivern-Style Gold Bead Dual Self-Illumination System Easily Transition Through
Without Batteries All Light Conditions
Keeps Its Shine, Won’t Tarnish For Superior Visibility In Rapidly
Nighttime and low light shooting tests Changing Light Conditions
Distinctive, 14K gold, McGivern- prove sights equipped with these glowing Low profile, tactical sight set
style bead dresses up your Smith & Wesson revolver and provides dots are easier to see and more accurate comes with a high visibility TFO
an easy-to-see dot that won’t dull or corrode. Blade is EDM wire cut than instinctive shooting with standard Tactical night sights employ a front sight that naturally attracts the eye, while the plain rear sight
from ground, flat stock to ensure clean edges and proper fit, then black sights. Rugged, self-luminous, 3-dot combination of self-illuminating Tri- won’t distract your focus. Serrations on the rear sight help reduce
matte finished for excellent contrast and glare resistance. Available Tritium lamps provide their own long-last- tium inserts and photoluminescent glare in bright daylight. Made exclusively for, and available only
in .250" or .300" blade heights to regulate properly with standard ing energy source. Lamps are mounted in silicone-sealed, metal paint for superior visibility in varying through Brownells, these high quality sights are ideal for competi-
factory loads or today’s high performance, hunting ammo. 1/8" di- cylinders to give maximum protection from breakage or leakage. low-light conditions. Tritium dots on tion, combat or low light shooting. a b
ameter, bead is slightly domed and highly polished for excellent light Polished sapphire, crystal windows give a bright, crisp and perfectly each side of the rear sight notch align SPECS: Steel, matte black finish. Green Tritium/ fiber optic rod. Sight
reflection. GC models fit S&W Classic and DX revolvers with inter- round aiming dot in low light. Inlaid white rings around each sap- with the front sight dot for a simple, heights same as factory. Glock fits 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34,
XD HR TM
changeable front sights. GP models fit S&W revolvers with pinned phire make the sights appear as standard white dots in daylight. horizontal, three-dot sight picture that’s easy 35, 38, 39 models. S&W M&P fits Smith & Wesson M&P including SHIELD
front sights; requires drilling and pinning for installation. a b Very narrow blades do not have the white ring and will look more to acquire even under stress. Bright orange or and .22 models (excluding .22 Compact/C.O.R.E. models), SD9 and SD40
SPECS: Blade - Steel, matte blued. 21/32" (16.7mm) long, 1/8" (3.2mm) wide, like a plain black blade in daylight. Most can be installed in factory yellow outline around the front insert emits (excluding VE models).
1
/ " (4.4mm) high. Bead - 14K gold. / " diameter.
4
1
8 dovetail or sight base. Glock® models require use of special Trijicon a short-term glow of its own that gives the #902-000-148AT TFO Front & Plain Rear Sight Set for
installation tools to prevent sight damage. a b eyes more time to adjust to a rapid reduction Glock, 2K64K30�������������������������������������� $ 69.99
#864-000-009AT GP .250" Gold Bead Sight, 4F51J84� $ 57.99 in ambient light—such as during a building entry—and pick up the
SPECS: Steel, blued with Tritium inserts. Sights listed as Adj. are adjust- #902-000-149AT TFO Front & Plain Rear Sight Set for
#864-000-010AT GP .300" Gold Bead Sight, 4F51F84� 57.99 able sights to fit guns originally equipped with factory, adjustable sights. Tritium insert. The outline is charged by exposure to any artificial or
S&W M&P, 2K64C30 ������������������������������ 69.99
#864-000-011AT GC .250" Gold Bead Sight, 4F51F84� 57.99 Sights listed as Fxd. fit guns originally equipped with factory, fixed sights. natural bright light. Yellow luminesces for approximately 10 minutes
#864-000-012AT GC .300" Gold Bead Sight, 4F51P84 57.99 S&W - unless otherwise indicated, these fit 3rd generation only, will NOT when fully charged; orange glows for approximately 5 minutes on
fit guns originally equipped with plastic sights. a full charge. Fixed rear sight has a wide U-shaped notch to guide
your eye quickly the front sight. Pronounced ridge on the front face
enables one-handed racking of the slide in an emergency, yet is STOCK # FITS COLOR PRICE
STOCK # FITS PRICE
contoured so it won’t snag during the draw.
#892-000-115AT Beretta 92/96A1 2H107H00 $ 107.00 #892-000-080AT Smith &Wesson M&P, SD9/ Orange 2H141N00 $ 141.00
Bright & Tough™
TRIJICON #892-000-003AT Beretta Brigadier (Fxd.) 2H107D00 $ 107.00 HD XR™ model has a thinner front sight post that allows the SD40
shooter to have a larger field of view, enhancing his ability to identify
Night Sight Set for Glock® #892-000-004AT Beretta Cougar (Fxd.) 2H107Q00 $ 107.00
the target, engage it, and see the location of hits on the target at lon-
#892-000-081AT Smith &Wesson M&P, SD9/ Yellow 2H141B00 $ 141.00
SD40
#892-000-005AT Beretta 9000 (Fxd.) 2H107Q00 $ 107.00 ger distances. This is a big advantage for law enforcement personnel
Tall Sights Permit Aiming Over #892-000-032AT Beretta PX4 Storm (Fxd.) 2H107H00 $ 107.00 who need precise visual engagement in any light conditions. a b #892-000-152AT S&W M&P Shield Orange 2H141L00 $ 141.00
An Attached Silencer #892-103-001AT Glock 17/17L/19/22/23/24/26/27/33/3 2H105I90 $ 107.00 SPECS: Machined steel sight body, de-horned, matte blued finish. Sold #892-000-139AT S&W M&P Shield Yellow 2H141A00 $ 141.00
4/35 (Fxd.) as front/rear sight sets. All sights have Green Tritium inserts, with Orange #892-000-082AT Springfield XD/XDM Orange 2H141I00 $ 141.00
Designed specifically for Glocks
or Yellow outline on front sight only, as indicated in the Color column in #892-000-083AT Springfield XD/XDM Yellow 2H141D00 $ 141.00
with suppressors, these high-profile, #892-103-002AT Glock 20/21/29/30/32 (Fxd.) 2H105G90 $ 107.00
the table below. Gunsmith installation recommended.
self-illuminating sights also work as a #892-000-166AT Glock 20/21/29/30/36/41, incl. S & SF 2H124G00 $ 124.00 #892-000-154AT Springfield XD-S Orange 2H141H00 $ 141.00
co-witness for the Trijicon RMR sight. Steel sights feature Tritium (Fxd, suppressor-height) #892-000-153AT Springfield XD-S Yellow 2H141L00 $ 141.00
filled lamps for easy sight acquisition in low light. The glowing, green STOCK # FITS COLOR PRICE
892-000-181AT Glock 20/21/29/30/41 (incl. S & SF) 2H124C00 $ 124.00 892-000-163AT Walther PPS/PPX Orange 2H139J27 $ 141.00
lamps are mounted inside silicone-sealed aluminum cylinders for HD Night Sights
protection against breaking or leakage. Solvent resistant, sapphire SUPPRESSOR HEIGHT - White front/ 892-000-162AT Walther PPS/PPX Yellow 2H139H27 $ 141.00
#892-000-124AT Colt 1911 Orange 2H141A00 $ 141.00
lenses focus and evenly distribute the light while protecting lamps Black rear HD XRTM Night Sights
#892-000-125AT Colt 1911 Yellow 2H141N00 $ 141.00
from punctures. Three sight configurations are available: white rings 892-000-182AT Glock 20/21/29/30/41 (incl. S & SF) Sup- 2H124J00 $ 124.00 892-000-185AT FN FNP/FNS/FNX 9mm Yellow 2H149Q99 $ 149.99
around front and rear lamps, white rings on front lamp with black #892-000-127AT 1911 (Novak dovetails) Yellow 2H141F00 $ 141.00
pressor Height - Black front/Black rear 892-000-186AT FN FNP/FNS/FNX 9mm Orange 2H149P99 $ 149.99
rings around rear sights, or black rings around front and rear lamps. #892-000-128AT HK USP Orange 2H141J00 $ 141.00
#892-000-155AT Glock 42 2H107E00 $ 107.00 892-000-183AT FN FNP/FNS/FNX .40 Yellow 2H00EBK $ 149.99
Gunsmith installation is recommended. a b #892-000-160AT H&K 45C/P30/VP9 Orange 2H141J00 $ 141.00
SPECS: Steel, blued, with green Tritium lamps. Fits Glock models; 17, 19, #892-103-102AT Glock Installation Tool 2H130C00 $ 130.00 892-000-184AT FN FNP/FNS/FNX .40 Orange 2H00NCF $ 149.99
#892-000-161AT H&K 45C/P30/VP9 Yellow 2H141K00 $ 141.00
22, 23, 24, 26, 27, 33, 34, 35, 38, and 39. #892-108-006AT H&K USP (Fxd.) 2H107D00 $ 107.00 892-000-187AT FN FNP/FNS/FNX .45 ACP Yellow 2H00QHH $ 149.99
#892-000-137AT FNH FNP-9/FNS-9/FNX-9 Yellow 2H141G00 $ 141.00
#892-000-133AT Night Sight Set w/White Rings, #892-108-007AT H&K USP Compact (Fxd.) 2H107F00 $ 107.00 892-000-188AT FN FNP/FNS/FNX .45 ACP Orange 2H00AHK $ 149.99
(all 9mm)
2H124K00����������������������������������������������� $ 124.00 #892-000-158AT H&K .45C/P30/VP9 (Fxd.) 2H107N00 $ 107.00 892-000-189AT Glock 17/19/22/26/32/37 Yellow 2H00JMH $ 149.99
#892-000-136AT FNH FNP-40/FNS-40/ Orange 2H141Q00 $ 141.00
#892-000-135AT Night Sight Set w/Black Rings, #892-102-001AT Ruger® P85® (Fxd.) 2H107B00 $ 107.00 892-000-190AT Glock 17/19/22/26/32/37 Orange 2H00AAP $ 149.99
FNX-40 (.40 S&W)
2H124M00 ��������������������������������������������� 124.00 #892-000-009AT Ruger SP-101®, .357 Mag. front only 2H72D00 $ 72.00 892-000-191AT Glock 20/21/30 Yellow 2H00MWP $ 149.99
#892-000-138AT FNH FNP-45/FNX-45 Yellow 2H141P00 $ 141.00
#892-000-134AT Night Sight Set w/White Front, Blk #892-100-001AT S&W 9mm, .40 (Adj.) 2H107I00 $ 107.00 892-000-192AT Glock 20/21/30 Orange 2H149Q99 $ 149.99
Rear Rings, 2H124G00 ����������������������� 124.00 (.45 ACP)
#892-100-004AT S&W 9mm/40 Full Size (Fxd.) 2H107F00 $ 107.00 #892-000-076AT Glock 17, 17L, 19, 22, 23, Orange 2H133A47 $ 141.00 892-000-193AT Glock /43
42
Yellow 2H149I99 $ 149.99
#892-100-012AT S&W 410, 909, 910 Full Size (Fxd.) 2H107M00 $ 107.00 24, 26, 27, 33, 34, 35, 892-000-194AT Glock 42/43 Orange 2H00HPD $ 149.99
#892-100-008AT S&W 9mm Compact, Novak (Fxd.) 2H107F00 $ 107.00 38, 39 892-000-195AT H&K 45C/P30/VPO Yellow 2H00KCP $ 149.99
#892-100-011AT S&W 4006/4046 Novak (Fxd.) 2H107I00 $ 107.00 #892-000-077AT Glock 17, 17L, 19, 22, 23, Yellow 2H133P47 $ 141.00 892-000-196AT H&K 45C/P30/VPO Orange 2H00IFC $ 149.99
TRIJICON® #892-100-009AT S&W .45 Std., Novak (Fxd.) 2H107P00 $ 107.00 24, 26, 27, 33, 34, 35, 892-000-197AT SIG Sauer 9mm/.357 SIG Yellow 2H149D99 $ 149.99
NO-TRITIUM SIGHT SET for GLOCK ® #892-000-034AT S&W M&P (Fxd.) 2H107P00 $ 107.00 38, 39 892-000-198AT SIG Sauer 9mm/.357 SIG Orange 2H149H99 $ 149.99
892-000-179AT Smith & Wesson M&P/SD9VE/SD40VE 2H124F00 $ 124.00 #892-000-116AT Glock 20, 21, 29, 30, 36, 41 Orange 2H140M72 $ 141.00 892-000-199AT SIG Sauer .40/.45 ACP Yellow 2H00KWG $ 149.99
High-Visibility 3-Dot Steel Suppressor Height (incl. S and SF variants) 892-000-235AT SIG Sauer .40/.45 ACP Orange 2H00HTF $ 149.99
Replacement Sights Fit All #892-000-132AT S&W M&P Shield 2H107B00 $ 107.00 #892-000-117AT Glock 20, 21, 29, 30, 36, 41 Yellow 2H140B72 $ 141.00 892-000-236AT Smith & Wesson M&P/ Yellow 2H00FID $ 149.99
Glock Pistol Models #892-000-002AT S&W Sigma .40 S&W (Fxd.) 2H107F00 $ 107.00 (incl. S and SF variants) SD9VE/SD40VE
#892-104-002AT SIG 3-Dot 220,229,240,245,2340 (Fxd.) 2H107L00 $ 107.00 #892-000-157AT Glock 42 Orange 2H134G92 $ 141.00 892-000-237AT Smith & Wesson M&P/ Orange 2H149J99 $ 149.99
Economical, “no-tritium”
steel sight set replaces the fac- #892-104-001AT SIG 3-Dot 225, 226, 228, 239 (Fxd.) 2H107C00 $ 107.00 #892-000-156AT Glock 42 Yellow 2H134G92 $ 141.00 SD9VE/SD40VE
tory plastic front and rear sights on all Glock models. Simply line 892-000-177AT SIG Sauer 9mm/.357 SIG Suppressor 2H124F00 $ 124.00 #892-000-164AT Ruger® SR9®/SR40®/ Orange 2H141H00 $ 141.00 892-000-238AT Smith & Wesson M&P Yellow 2H00NJN $ 149.99
up the three white dots horizontally for fast target acquisition. Sight Height SR40c® Shield 9mm/.40/.45
bodies are patterned after the factory originals and won’t snag on 892-000-178AT SIG Sauer .40 S&W/.45 ACP Suppres- 2H124J00 $ 124.00 #892-000-165AT Ruger® SR9®/SR40®/ Yellow 2H141N00 $ 141.00 892-000-239AT Smith & Wesson M&P Orange 2H149F99 $ 149.99
clothing or gear. a b sor Height Shield 9mm/.40/.45
SR40c®
SPECS: Steel, blued, matte finish. Sold as front/rear sight set. Fits models
17, 17L, 19, 20, 21, 21SF, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, #892-000-033AT Springfield XD/XDM (Fxd.) 2H107I00 $ 107.00 #892-000-078AT SIG P225, 226, 228, 239 Orange 2H141H00 $ 141.00 892-000-240AT Springfield XD/XDM Yellow 2H149K99 $ 149.99
36, 37, 38, and 39. Gunsmith installation recommended. 892-000-180AT Springfield XD/XDM Suppressor Height 2H124B00 $ 124.00 #892-000-079AT SIG P225, 226, 228, 239 Yellow 2H141G00 $ 141.00 892-000-241AT Springfield XD/XDM Orange 2H00ESE $ 149.99
#892-000-119AT No-Tritium Sight Set for Glock, #892-111-001AT Walther P-99, S&W99 (Fxd.) 2H107C00 $ 107.00 #892-000-129AT SIG P220, 229 Orange 2H141G00 $ 141.00 892-000-242AT Springfield XD-S Yellow 2H00DZH $ 149.99
2H38N00�����������������������������������������������������$ 39.99 #892-000-159AT Walther PPS/PPX (Fxd.) 2H107M00 $ 107.00 #892-000-130AT SIG P220, 229 Yellow 2H141J00 $ 141.00 892-000-243AT Springfield XD-S Orange 2H00GAK $ 149.99
SATISFACTION GUARANTEED
PAGE 300 SINCE 1939 Office/Tech: 641-623-5401
NEW FOR 2017!
TRIJICON ACCUPOWER® 1-8x28
LED ILLUMINATED RIFLESCOPE
RED MOA RETICLE / GRN MOA RETICLE
#892-000-265 / #892-000-266
Available at
TRUGLO Item
TRUGLO SEMI-AUTO Items
TRUGLO TFXTM/TFXTM Pro WILSON COMBAT
SIGHT SETS for GLOCK ®
TFO BRITE-SITE Day/Night Sights VICKERS ELITE SIGHTS for GLOCK
handgun sights
Advanced Sight Systems For All Shooting Conditions, Day & Night Gathers Light & Illuminates For Maximum Visible In Any Light, Handles Rear & Front Sights Help With
High-quality sight systems offer exceptional brightness in a low- Sight Visibility In All Conditions The Harshest Operating Quick Sighting
profile configuration that won’t hang up in your holster or slow you Conditions Steel sights drop into Glock pistols
902-952-2020
down. Popular three-dot system provides fast sight alignment in Tritium/Fiber Optic (TFO) in 9mm, .357 Sig, 40 S&W and 45 GAP,
high stress situations. Direct replacements for factory sights. ab technology combines the self- “Extreme” tactical sight combines
Truglo’s high-visibility TFO® technol- and help improve sight picture and add function-
SPECS: Steel, matte black finish. Sight heights same as factory. illuminating properties of Tritium ality. All sights have serrated faces to cut glare in
with the light-gathering capa- ogy with a rugged steel sight body that
TRITIUM/FIBER OPTIC BRITE-SITE encases and protects the components bright sunlight and come with installation hard-
bilities of fiber optics to ensure ware and tools. Rear Sight gives a wide U-notch
- Advanced T.F.O. technology com- fast sight acquisition in any light conditions from daylight to com- inside from impact damage. Combina-
bines the brightness of fiber optics 902-952-2025
tion of Swiss-made Tritium inserts, light- that helps the eye quickly pick up the front sight,
plete darkness. Precision-machined, steel body provides excellent even in low light. Special shelf shape helps with one-handed cycling
with the glowing property of Tritium strength to handle the rigors of combat or competition. Low-profile gathering fiber optic rods, and simple
to provide fast sight acquisition and white target rings ensures these sights or malfunction clearing. Two set screws help secure rear sight in
design prevents holster snagging. Fits factory dovetails; rear sight in- place once it’s drifted into the rear sight notch. Rear sight is .245" tall
excellent transition from daylight cludes setscrew for extra-secure installation on slide. Sold in front/ are visible 24/7, in any light conditions.
to darkness. Machined channels in Hermetically sealed TFX capsule protects and designed to work with Vickers Elite front sights, or other front
rear pairs. a b 902-952-2054 sights .125" wide and .245" tall. Front Sights are available with green
front and rear sight housings provide maximum, ambient light SPECS: Steel, matte black finish. Fiber optic/Tritium rods, green front/ the Tritium and fiber optic elements from
gathering and protect the rods from damage while concealing moisture, oils, and cleaning solvents. Sold in green front/rear sight or red fiber optic insert or green Tritium insert, and feature snag-free
green rear or green front/yellow rear. Sight heights same as factory. SIG design that won’t impede draw from duty holster or from conceal-
them from your target. Two-dot rear and single-dot front creates 9mm/.357 - #8 Front (F) - .952" (2.4cm) long x .166" (4mm) wide. #8 sets for factory dovetails. TFX Pro sights are ruggedized to provide
an easy-to-align three-dot sight picture. 131GT1 and 131GT2 have tactical professionals and other shooters with sights that deliver ment. All sights sold separately, and may require minor fitting. Sights
Rear (R) - .917" (2.3cm) long x .625" (1.6cm) wide. SIG .40/.45 – #6 Front do not fit 45ACP or 10mm pistols. a b
green front and rear sights (G/G). 131GT1Y and 131GT2Y - green (F) - .965" long x .167" (4mm) wide. #8 Rear (R) - .922" (2.3cm) long x .642" ultimate reliability, accuracy, and brightness no matter how tough
things get. In addition, they also offer a contrasting orange ring SPECS: Steel, Parkerized finish, matte black. Rear Sight: U-notch .145"
dot front and yellow rear sight (G/Y). (1.6cm) wide. S&W M&P – Front - .920" (2.3cm) long x .355" (9mm) wide.
SPECS: 131GT1/131GT1Y fits Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, around the front dot and a U-shaped rear notch that make it even (3.6mm) wide. Front Sight: .245" (6.2mm) high.
Rear – .867" (2.2cm) long x .820" (2.1cm) wide. Springfield XD - Front (F)
35, 38 and 39. 131GT2/131GT2Y fits Glock 20, 21, 29, 30, 31, 32 and 37. - .970" (2.5cm) long x .163" (4.2mm) wide. Rear (R) - .905" (2.3cm) long x easier to align the sights quickly. Front edge of the rear sight is angled #965-000-198AT Vickers Elite Battlesight Rear Sight,
131GT1A/131GT1B fits Glock 42. .618" (1.6cm) wide. Fits all Springfield XD models. to enable emergency one-handed slide racking. a b 5F46N49���������������������������������������������������� $ 49.95
#902-000-083AT 131GT1 TFO Sight Set, G/G, SPECS: Smith & Wesson M&P fits all models, including Shield and .22 (ex- #965-000-199AT Vickers Elite Front Sight, Green Fiber
2K94K30���������������������������������������������������� $ 99.99 STOCK # FITS COLOR (F/R) PRICE cluding .22 Compact/C.O.R.E. models); also fits SD9/SD40 (excluding VE). Optic, 5F37F17������������������������������������������ 38.99
#902-000-107AT 131GT1Y TFO Sight Set, G/Y, 902-000-178AT Kahr K/MK/P/PM/T/TP Green/Yellow 2K94E39 $ 99.99 #965-000-200AT Vickers Elite Front Sight, Red Fiber
STOCK # FITS PRICE Optic, 5F37F17������������������������������������������ 38.99
2K94K30���������������������������������������������������� 99.99 (with post-2004 dovetail) Standard TFXTM Sight Sets #965-000-201AT Vickers Elite Front Sight, Green
#902-000-084AT 131GT2 TFO Sight Set, G/G, #902-000-143AT Ruger LC9®/LC380® Green/Green 2K94J30 $ 99.99
2K94J30 ���������������������������������������������������� 99.99 #902-952-025AT 1911 Gov't Novak LoMount 2K125N75 $ 133.99 Tritium, 5F42E76�������������������������������������� 44.99
#902-000-144AT Ruger LC9®/LC380® Green/Yellow 2K94D30 $ 99.99 .260"/.450"
#902-000-108AT 131GT2Y TFO Sight Set, G/Y,
#902-000-093AT Sig 9mm/.357 Green/Green 2K94B30 $ 99.99 #902-952-026AT 1911 Gov't Novak LoMount 2K125B75 $ 133.99
2K94H30���������������������������������������������������� 99.99
#902-000-109AT Sig 9mm/.357 Green/Yellow 2K94M30 $ 99.99 .270"/.450"
#902-000-141AT 131GT1A TFO Sight Set, G/G,
2K94Q30���������������������������������������������������� 99.99 #902-000-094AT Sig .40/.45 Green/Green 2K94P30 $ 99.99 #902-952-027AT 1911 Officers/Commander Novak 2K125G75 $ 133.99
#902-000-142AT 131GT1A TFO Sight Set, G/Y, #902-000-110AT Sig .40/.45 Green/Yellow 2K94E30 $ 99.99 LoMount .260"/.500" STOCK # FITS PRICE
2K94A30���������������������������������������������������� 99.99 #902-000-125AT S&W M&P Green/Green 2K94K30 $ 99.99 #902-952-028AT 1911 Officers/Commander Novak 2K125J75 $ 133.99 TFXTM Pro Sight Sets
#902-000-126AT S&W M&P Green/Yellow 2K94C30 $ 99.99 LoMount .270"/.500" #902-952-045AT 1911 .45 ACP Gov't, Novak 2K150P99 $ 172.99
TRITIUM BRITE-SITE - Self-illuminating
#902-000-102AT Springfield XD Green/Green 2K94D30 $ 99.99 902-000-163AT Beretta PX4 2K58D89 $ 64.99 LoMount .260"/.450"
Tritium emitters glow bright green so
you can find your sights, even in very #902-000-111AT Springfield XD Green/Yellow 2K94D30 $ 99.99 902-000-164AT CZ 75 2K125M59 $ 133.99 #902-952-046AT 1911 9mm Gov't, Novak LoMount 2K150M99 $ 172.99
low light. Surrounding white ring shows 902-000-165AT FN FNX9 2K125N59 $ 133.99 .270"/.450"
up well in daylight. 231G1 fits models 17, 902-000-166AT FN FNX40 2K125P59 $ 133.99 #902-952-047AT 1911 .45 ACP Officer/Command- 2K150C99 $ 172.99
17L, 19, 22, 23, 24, 26, 27, 33, 34 and 35. 902-000-167AT FN FNX45 2K125N59 $ 133.99 er, Novak LoMount .260"/.500"
231G2 fits models 20, 21, 29, 30, 31 and
#902-952-020AT Glock® 17/17L/19/22/23/24/26/2 2K125B75 $ 133.99 #902-952-048AT 1911 9mm Officer/Commander, 2K150N99 $ 172.99
32. 231G1A fits models 42 and 43.
WARREN TACTICAL 7/33/34/35/38/39 Novak LoMount .270"/.500"
#902-000-085AT 231G1 Sight Set for Glock,
2K61F06������������������������������������������������������ $ 68.94 FRONT SIGHT SCREWS for GLOCK® #902-952-021AT Glock®
20/21/29/30/31/32/37/40/41
2K125N75 $ 133.99 #902-952-035AT
902-000-159AT
CZ-75 (including Compact)
FN FNX9
2K150L99
2K125K59
$ 172.99
$ 133.99
#902-000-086AT 231G2 Sight Set for Glock,
2K70J72������������������������������������������������������ 74.99 Non-Corroding Stainless Steel 902-000-168AT Glock 2K125C59 $ 133.99 902-000-160AT FN FNX45 2K125F59 $ 133.99
#902-000-145AT 231G1A Sight Set for Glock 42/43, Replacements For Aftermarket Sights 20/21/29/30/31/32/37/40/41 #902-952-039AT Glock 17/17L/19/22/23/24/26/27 2K150J99 $ 172.99
2K70N72���������������������������������������������������� 74.99 Stainless steel screws have the standard SUPPRESSOR HEIGHT /33/34/35/38/39
Glock 3/16" hexagonal head but a shorter #902-952-022AT Glock® 42/43 2K125I75 $ 133.99 #902-952-040AT Glock 2K150D99 $ 172.99
FIBER OPTIC BRITE-SITE - Fiber optic
shank for correct fit on threaded aftermarket front sights from War- 902-000-169AT H&K P30 2K125A59 $ 133.99 20/21/25/29/30/31/32/37/40/41
rods gather ambient light and produce
ren Tactical, Novak, Trijicon, and others. Inexpensive, corrosion- 902-000-170AT Kahr K/MK/P/PM/T/TP (with 2K125K59 $ 133.99 #902-952-041AT Glock 42/43 2K123C50 $ 139.44
a brilliant shine in bright and low-light
resistant replacements for lost or dinged up screws that came with post-2004 dovetail) 2K150Q99 $ 172.99
conditions without battery power. Con- #902-952-042AT HK VP9/VP40/P30/P30Sk/
your sights. Fits standard Glock front sight tool. Use with thread-
trasting green rear and orange front en- #902-952-023AT Kimber 2K125A75 $ 133.99 P30L/45
locking agent to ensure a secure installation. Recommended for
sures fast sight recognition and align- 902-000-171AT Ruger American 2K125B59 $ 133.99 #902-952-044AT Kimber 1911 (models with fixed 2K150L99 $ 172.99
all Warren front sights for Glock, including Tactical, Sevigny, Fiber
ment. Rods are recessed and fully protected in the sight channels
Optic, and Tritium Night Sight models sold individually and in sets. #902-952-029AT Ruger® SR Series 2K125J75 $ 133.99 rear)
to survive the toughest blows and remain hidden from your target.
Available in 2- and 5-Paks. a b #902-952-030AT Ruger® LC Series 2K125Q75 $ 133.99 902-000-161AT Ruger American 2K125A59 $ 133.99
131G1 fits Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34 and 35. 131G2
SPECS: Stainless steel, natural finish. .110" long shank. 3/16" (.188"/4.8mm) 2K125E75 $ 133.99 #902-952-050AT Ruger® LC9/9S/380 2K150H99 $ 172.99
fits Glock 20, 21, 29, 30, 31 and 32. Sig #8/#8 fits Sig Sauer pistols #902-952-031AT Sig 9mm/.357 SIG (#8/#8)
diameter head. 3‑56 thread pitch.
that use a #8 front and a #8 rear. Sig #6/#8 fits Sig Sauer pistols #902-952-032AT Sig .40/.45 Cal. (#6/#8) 2K125E75 $ 133.99 #902-952-049AT Ruger® SR9/SR9C/SR40/SR40C/ 2K150C99 $ 172.99
that use a #6 front and a #6 rear. Kimber fits Kimber 1911 with #100-006-816AT Glock Front Sight Screws, 2-Pak,
5A5D39���������������������������������������������������������$ 5.99 #902-952-024AT S&W M&P 2K125I75 $ 133.99 SR45
factory sights. XD/S fits all models of Springfield XD and XDS. S&W 2K150J99
#100-006-817AT Glock Front Sight Screws, 5-Pak, #902-952-033AT Springfield XD/XDM/XDS 2K125I75 $ 133.99 #902-952-052AT Sig #8 Front/#8 Rear $ 172.99
M&P fits 9mm & 40 S&W.
5A10I85��������������������������������������������������������� 11.99 902-000-172AT Steyr Mannlicher M-A1, C-A1, 2K125A59 $ 133.99 #902-952-053AT Sig #6 Front/#8 Rear 2K150E99 $ 172.99
#902-000-087AT 131G1 Glock F/O Sight Set,
2K49H99������������������������������������������������� $ 56.44 S-A1, L-A1 #902-952-051AT S&W M&P/SD9/SD40 2K150G99 $ 172.99
#902-000-088AT 131G2 Glock F/O Sight Set, 902-000-173AT Taurus Millenium G2, 709 Slim, 2K125B59 $ 133.99 #902-952-054AT Springfield XD/XDM/XDS 2K150J99 $ 172.99
2K55C01 ������������������������������������������������� 58.99 740 Slim 902-000-162AT Steyr Mannlicher M-A1, C-A1, 2K125H59 $ 133.99
#902-000-132AT Sig #8/#8 F/O Sight Set, 2K55G01�� � 58.99 902-000-176AT Walther CCP 2K125I59 $ 133.99 S-A1, L-A1
#902-000-133AT Sig #6/#8 F/O Sight Set, 2K55E01��� 58.99 #902-000-135AT Springfield XD/S F/O Sight Set, 902-000-174AT Walther PPQ 2K125Q59 $ 133.99 902-000-156AT Walther CCP 2K125B59 $ 133.99
#902-000-134AT Kimber 1911 F/O Sight Set, 2K55D01 ������������������������������������������������� 58.99 902-000-175AT Walther PPS 2K125C59 $ 133.99 902-000-157AT Walther PPQ 2K125L59 $ 133.99
2K55Q01������������������������������������������������� 58.99 #902-000-136AT S&W M&P F/O Sight Set, 2K55A01��� 58.99 902-000-177AT Walther PPS M2 2K125L59 $ 133.99 902-000-158AT Walther PPS M2 2K125M59 $ 133.99
SATISFACTION GUARANTEED
PAGE 302 SINCE 1939 Office/Tech: 641-623-5401
TRUGLO Items
TRUGLO WARREN TACTICAL
Tritium Pro Night Sights Standard Tritium Night PISTOL SIGHTS
STOCK # STYLE PRICE
Sight Sets Tactical 2-Dot Sevigny Comp
handgun sights
Ultra-Rugged & Reliable, The Tritium Rear/ Tactical Rear/ Rear/Std Front
#100-005-137AS Sevigny Carry w/1-Dot Tritium 5A73H80 $ 77.99
Tritium Front Fiber Optic
Next Step in Tritium Sight
Self-Illuminating Sights You Can Front
FRONT SIGHTS for GLOCK®
Development
See in Any Light
Starting with the brightness STOCK # STYLE HXW PRICE
and durability of their original Glock 17 (etc.) Sometimes you need en- #100-005-081AT Gunsmith Blank .3 x .125 5A31M68 $ 34.99
Tritium night sights, TruGlo add- hancements, sometimes you sim- w/Serr. Face
ed all of their TFX PRO features ply need a bright, steady-glowing, 5A23D84
#100-005-075AT Black Serrated .215 x .125 $ 25.99
to give you the advantage when reliable Tritium night sight that comes through when the lights go “Working” Sights For Duty, Carry, Or Competition;
out. These sights look like standard white dot sights in daylight and #100-005-080AT Black Serrated .245 x .125 5A23M84 $ 25.99
you need it the most. The front Fiber Optic & Tritium Options
sight's "focus lock" ring works transition to glowing green dots as the ambient light decreases. Self- #100-005-092AT Black Serrated .185 x .115 5A25P67 $ 27.99
with the U-notch rear sight for Novak illuminating Tritium does not need batteries and does not need to Used by numerous IDPA and USPSA National champions, as well #100-005-093AT Black Serrated .215 x .115 5A25M67 $ 27.99
even faster focus. Angled rear be "charged" with exposure to sunlight - it simply glows on its own! as law enforcement professionals, these streamlined, steel sights #100-005-094AT Black Serrated .245 x .115 5A25P67 $ 27.99
sight edge enables emergency Three-dot sight pattern; all dots are green. These sights have strong, are built for fast target acquisition. A variety of front and rear sight #100-005-100AT Fiber Optic .185 x .115 5A34I86 $ 36.99
one-handed slide racking. Swiss "de-horned" machined steel housings, with a low enough profile configurations, including fiber optics, self-illuminating Tritium in-
that they won't interfere with putting your gun in a standard holster serts, and plain black, let you mix and match for carry, competition #100-003-610AT Fiber Optic .215 x .115 5A34I86 $ 36.99
Tritium inserts deliver maximum
brightness for unmatched vis- made for it. a b or tactical operations. Designed to fit factory dovetails with little to #100-005-103AT Fiber Optic .245 x .115 5A34E86 $ 36.99
ibility in low-light shooting SPECS: Kimber fits Kimber 1911 with factory sights. SIG #8/#8 fits Sig no fitting required. Ramped Front Sights are available with a black, #100-005-119AT 1-Dot Tritium .185 x .125 5A45L42 $ 47.99
conditions. Snag-resistant ma- Sauer pistols that use a #8 front and a #8 rear. SIG #6/#8 fits Sig Sauer serrated rear face to minimize glare, interchangeable bright red #100-005-121AT 1-Dot Tritium .215 x .125 5A45F42 $ 47.99
chined steel sight bodies have Springfield XD pistols that use a #6 front and a #8 rear. or green fiber optic rods for fast acquisition in diverse light condi- #100-005-122AT 1-Dot Tritium .245 x .125 5A45I87 $ 48.99
TruGlo's ultra-hard Fortress tions, or Tritium inserts with white ring outline. Rear Sights have a
Finish™ that provides a perma- STOCK # FITS PRICE non-serrated face and are available in plain matte black for optimal S&W M&P SIGHT SETS
nent protective coating for maximum protection against scratches, #902-000-085AT Glock 17/17L/19/22/23/24/26/27 2K61F06 $ 68.94 contrast in bright light, as well as in 1-dot or 2-dot Tritium configura-
nicks, and holster wear. Pistol will still fit standard holsters with these /33/34/35 tions for low light and night use. Drift-adjustable for windage, with STYLE
sights installed. a locking setscrew to hold the setting. Tactical rear sight features STOCK # STYLE REAR FRONT FITS PRICE
#902-000-086AT Glock 20/21/29/30/31/32 2K70J72 $ 74.99 a unique Wave Profile contour with concave corners for an extra #100-005-123AT Tactical Black Full Size/ 5A55D07 $ 59.99
STOCK # FITS PRICE #902-000-145AT Glock 42/43 2K70N72 $ 74.99 wide field-of-view and smooth, no-snag removal from the holster. Serrated Compact
#902-000-180AT Beretta PX4 2K73B39 $ 79.99 #902-000-131AT Kimber 1911 (w/factory fixed 2K70D72 $ 74.99 U-shaped notch has gently radiused corners to help direct the eye
quickly to the front sight acquisition. Sevigny Competition rear sight #100-005-141AT Tactical Fiber Full Size/ 5A69N31 $ 72.99
#902-000-182AT FN FNX40 2K73F39 $ 79.99 rear sight)
features a plain, square notch and a crisp, clear outline with no ser- Optic Compact
#902-000-183AT FN FNX45 2K73Q39 $ 79.99 902-000-207AT Novak 1911 .260" high front/.450" 2K62P29 $ 69.99
rations, points, edges, or other distractions. Rear face slopes back #100-005-143AT Tactical Fiber Pro/L 5A69B31 $ 72.99
#902-000-181AT FN FNX9 2K73C39 $ 79.99 high rear toward the shooter at the top to prevent glare. Sevigny Carry has the Optic Series
#902-000-184AT Glock 17/17L/19/22/23/24/26/27/3 2K73N39 $ 79.99 902-000-209AT Novak 1911 .260" high front/.500" 2K62B29 $ 69.99 same features as the Competition, plus rounded edges on the rear #100-005-156AT Tactical Tritium Full Size/ 5A79D32 $ 82.99
3/34/35/38/39 high rear face to resist snagging on clothing during carry or unholstering. a b 1-Dot Compact
#902-000-187AT Glock 17/17L/19/22/23/24/26/2 2K73M39 $ 79.99 902-000-208AT Novak 1911 .270" high front/.450" 2K62Q29 $ 69.99 SPECS: Hardened steel, matte black finish. Fiber Optic sights come with
1 red and 1 green rod, 2" long x .040" dia. Tritium - Front sights: Green #100-005-170AT Tactical Tri- Tritium Full Size/ 5A114P73 $ 119.99
7/33/34/35/38/39 SUPPRESSOR high rear
with .100" dia. inlaid white ring outline, .050" dia. Tritium lamp. Rear sights: tium 1-Dot 1-Dot Compact
HEIGHT 902-000-210AT Novak 1911 .270" high front/.500" 2K62H29 $ 69.99
Yellow. .040" dia. Tritium lamp. Sight Sets - Front and rear sights are fully #100-005-171AT Tactical Tri- Tritium Pro/L 5A114D73 $ 119.99
#902-000-185AT Glock 20/21/25/28/29/30/31/32 2K73E39 $ 79.99 high rear regulated. Front Sights - All have serrated rear face, except Tritium. Front tium 1-Dot 1-Dot Series
/37/40/41 902-000-212AT Ruger LC Series 2K62N29 $ 69.99 sights for Glock include hexagonal mounting screw. Rear Sights - Sevi- #100-005-177AT Tactical Tri- Tritium Full Size/ 5A124D80 $ 129.99
#902-000-188AT Glock 20/21/25/28/29/30/31/32/3 2K73C39 $ 79.99 902-000-211AT Ruger SR Series - Front sight only 2K31P19 $ 34.99 gny - .150" wide notch. Tactical - .145" wide notch.
tium 2-Dot 1-Dot Compact
7/40/41 SUPPRESSOR HEIGHT #902-000-129AT SIG #8/#8 2K70K72 $ 74.99
SIGHT SETS for GLOCK® #100-005-178AT Tactical Tri- Tritium Pro/L 5A124M80 $ 129.99
#902-000-186AT Glock 42/43 2K73G39 $ 79.99 #902-000-130AT SIG #6/#8 2K70A72 $ 74.99 tium 2-Dot 1-Dot Series
#902-000-189AT H&K P30 2K73B39 $ 79.99 STOCK # REAR STYLE FRONT STYLE PRICE #100-005-150AT Sevigny Fiber Full Size/ 5A79H09 $ 82.99
#902-000-179AT Kahr 2K73M39 $ 79.99 #100-003-026AS Tactical Black Serrated 5A55G07 $ 59.99 Competition Optic Compact
#902-000-190AT Kimber 1911 w/factory fixed rear 2K73P39 $ 79.99 #100-008-833AS Tactical Fiber Optic 5A70G69 $ 76.99 #100-005-152AT Sevigny Fiber Pro/L 5A79I09 $ 82.99
sight XS SIGHT SYSTEMS #100-005-159AS Tactical Tritium 1-Dot 5A81B70 $ 88.99 Competition Optic Series
#902-000-191AT Novak 1911 .260" high front/.450" 2K73F39 $ 79.99 #100-005-172AS Tactical Tritium 1-Dot Tritium 1-Dot 5A119H36 $ 129.99
high rear PRO EXPRESS SIGHT #100-003-609AS Tactical Tritium 2-Dot Tritium 1-Dot 5A124L80 $ 129.99 S&W M&P FRONT SIGHTS
#902-000-193AT Novak 1911 .260" high front/.500" 2K73N39 $ 79.99 Easy-To-See White Line Or Tritium #100-003-027AS Sevigny Competition Black Serrated 5A72A08 $ 84.99 STOCK # STYLE HXW FITS PRICE
high rear #100-003-608AS Sevigny Competition Fiber Optic 5A84L88 $ 89.99 #100-005-096AT Fiber Optic .165 x .115 Full Size/ 5A34M86 $ 36.99
#902-000-192AT Novak 1911 .270" high front/.450" 2K73K39 $ 79.99 All steel, fully adjustable for windage and elevation, V-rear blade Compact
high rear gives fast sight alignment. Vertical, white line, or tritium bar pro-
#100-005-125AS Sevigny Carry Black Serrated 5A55L07 $ 59.99 #100-005-101AT Fiber Optic .190 x .115 Pro/L 5A34F86 $ 36.99
vides a quick focal point with the front sight. Use with a tritium or
#902-000-194AT Novak 1911 .270" high front/.500" 2K73J39 $ 79.99 #100-005-144AS Sevigny Carry Fiber Optic 5A70K69 $ 74.99 Series
white Big Dot front sight for a bar-dot setup. a b
high rear SPECS: Steel, black, matte finish. Rear Sight: Blade - .760" (19.3mm) wide, #100-005-160AS Sevigny Carry Tritium 1-Dot 5A81A70 $ 86.99 #100-005-116AT 1-Dot Tritium .165 x .125 Full Size/ 5A45N42 $ 47.99
#902-000-197AT Ruger American 2K73J39 $ 79.99 .385" (9.8mm) high. Body - 1.5" (3.7mm) long, .72" (17.5mm) wide. Fits #100-005-173AS Sevigny Carry Tritium 1-Dot Tritium 1-Dot 5A114E73 $ 119.99 Compact
#902-000-196AT Ruger LC Series 2K73M39 $ 79.99 BM-1 sight cut. Use with .180" high front sight. Front Sight: fits 65° x .330"
#902-000-195AT Ruger SR Series 2K73C39 $ 79.99 x .075" dovetail. .210" high. .161" (4mm) diameter dot. REAR SIGHTS for GLOCK® S&W M&P REAR SIGHTS
#902-000-199AT SIG w/#6 front & #8 rear 2K73L39 $ 79.99 #006-000-021AT White Line Express Rear Sight, STOCK # STYLE FITS PRICE
6K92M29����������������������������������������������������� $ 97.99 STOCK # STYLE PRICE
#902-000-198AT SIG w/#8 front & rear 2K73E39 $ 79.99 #100-005-108AS Tactical 5A35E78 $ 38.99 #100-005-106AT Tactical Full Size/Compact 5A35K78 $ 38.99
#006-000-022AT Tritium Express Rear Sight,
#902-000-206AT Smith & Wesson Bodyguard .380 2K73K39 $ 79.99 #100-005-136AS 5A73L80 $ 77.99
ACP
6K117M79 ��������������������������������������������������� 123.99 Tactical w/1-Dot Tritium SIG REAR SIGHTS
#006-000-025AT White Big Dot Front Sight, 6K30P90��� 35.99 #100-005-166AS Tactical w/2-Dot Tritium 5A85I46 $ 89.99
#902-000-205AT Smith & Wesson M&P (incl. Shield 2K73K39 $ 79.99 #100-005-114AS Sevigny Competition 5A44L52 $ 46.99 STOCK # STYLE FITS PRICE
#006-000-026AT Tritium Big Dot Front Sight,
& .22 LR), SD9, SD40 6K55E59 ����������������������������������������������������� 63.99 5A35I78 $ 38.99 #100-005-097AT Tactical Sig 220/226 5A35J78 $ 38.99
#100-005-109AS Sevigny Carry
#902-000-204AT Springfield XD 2K73N39 $ 79.99
#902-000-200AT Taurus Millenium G2, 709 Slim, 2K73N39 $ 79.99
740 Slim
#902-000-203AT Walther CCP 2K73I39 $ 79.99
#902-000-201AT
#902-000-202AT
Walther PPQ
Walther PPS
2K73J39 $ 79.99
2K73A39 $ 79.99
QUESTIONS BEFORE YOU BUY — Ask Our Full-Time Tech Staff
SATISFACTION GUARANTEED
PAGE 304 SINCE 1939 Office/Tech: 641-623-5401
FLAT-RATE SHIPPING PROGRAM
We offer four flat-rate shipping options to all of the United States including Alaska, Hawaii,
BUSINESS AND SHIPPING POLICIES Puerto Rico, and all protectorates. We use all of the domestic shipping services—USPS, UPS, and
FedEx—and will select the best shipper to deliver your order in the time frame you request. Choose
GUARANTEES: It is our policy to carry only those products that are the best available and will please
YOU - regardless! We personally guarantee, on a money-back basis, that you will be pleased with the the shipping option, listed below, that best meets your requirements. For our current shipping rates,
products you buy from us. Your satisfaction is guaranteed 100% - period! please call 800-741-0015 or visit Brownells.com.
TRANSPORTATION CHARGES: The Brownells Flat-Rate Shipping Program applies to all orders. 3-5 DAY GROUND SERVICE may be subject to an additional hazardous
Exceptions to this program are listed on the following page, and below the product in the catalog. Our most popular shipping option, offering materials fee .
DELIVERY: We have an unusual record for Fast Service, generally delivering faster and sooner than if you you an excellent balance of speed and economy.
2nd Day & Next Day
were to order locally. We are constantly working to improve our service to you. Some weight restrictions may apply.
• Because these shipments go by air, they
4-7 DAY STANDARD SERVICE cannot contain any of the following: aerosols;
METHODS OF PAYMENT: SATURDAY DELIVERY: If you want your
A money-saving option for eligible orders. bluing salts/chemicals or cold blues; lacquers;
CASH: Send remittance in personal check, package delivered on Saturday, there will be
cashier’s check or money order to avoid loss an additional charge. Saturday delivery not Some weight restrictions apply. No hazardous, plating chemicals; oils; stock finishes or
in the mail. Payment by cashier’s check or available in all areas. Please be at shipping ORMD, or FFL items. thinners.
money order will avoid any possible delay for address at time of delivery.
2ND DAY SERVICE
personal check or company check clearance. SHIPPING ADDRESS: It is very important that
Oversized Items
C.O.D.: C.O.D.’s are subject to an $18.00 charge U.S. orders must be received by 2:00 p.m.,
we have your street address AND your P.O. box, • Some large items may incur an additional
per order. Carriers accept cashier’s checks, Central Time, to be shipped that same day.
if applicable. shipping charge from UPS or FedEx. If this
money orders and pre-approved *Personal Hazardous, ORMD, and aerosol products cannot
PLEASE SEND SUFFICIENT FUNDS: In cases where applies to anything in your order, you will be
or *Business checks. Brownells must pre- be shipped via this method and must ship
approve payment by Personal or Business insufficient funds are sent to cover price increases separately via 3-5 Day Ground Service. 2nd Day informed at the time of checkout (website) or
check; contact us for details. (No 2-party and you have not advised us to ship “Balance COD”, by our phone order taker.
we will ship your order to you the same day it is re- Service not guaranteed.
checks.)
OPEN ACCOUNT: Accepted only from firms ceived as nearly complete as possible. This prevents NEXT DAY SERVICE • If your order contains restricted and
delaying your order and inconveniencing you.
rated “Good” or better in Dun & Bradstreet,
Whenever possible, please send a little extra to U.S. orders must be received by 2:00 p.m., non-restricted items, your order will be split.
and recognized, government institutions.
cover price increases. Any overage will be refunded Central Time, to be shipped that same day. This WILL generate 2 orders AND 2 shipping
CREDIT CARD: Visa, Mastercard, Discover
by Bank Check with the order. Or, mark the “Bal- You should receive your merchandise the charges. Example: $15.95 for standard
and American Express cards are accepted. ance COD” box on the order blank and we will send
Please give your card number, expiration NEXT business day. Hazardous, ORMD, and shipping of restricted items and $27.95 for
a C.O.D. billing for the amount that’s short.
date, and the name on the card. aerosol products cannot be shipped via this 2nd day shipping of unrestricted items. Total
WIRE TRANSFER: Permits direct, immediate E-MAIL: We will be happy to notify you by e-mail method and must ship separately via 3-5 Day shipping charges would be $43.90. Rates are
transfer of funds from your bank to our when your order ships, giving you the tracking Ground Service. for example only. For current shipping rates
bank. For large phone orders exceeding number, order number, and order total.
FREE BACK ORDER SHIPPING call 800-741-0015 or visit Brownells.com
Credit Card or C.O.D. limits, this is the
FIREARMS SALES: All sales of FFL-restricted
best method of payment. To perform a Back orders (out-of-stock items not shipped OXYNATE BLUING SALTS
items are made in strict accordance with all
wire transfer, please call us during normal federal regulations. in a multiple-item order) are shipped free. Free The 40 lb. cans of Oxynate® #7 (#082‑007-
business hours at 641-623-5401 and we shipping does not apply to single-item orders.
(1) To purchase an action, frame, or barreled 140KT) and Oxynate® #84 (#082-084-140KT)
will assist you with the transaction. Please Shipping charges are assessed on first item(s)
action, you must send a copy of your current FFL, Bluing Salts (both on page 391) require an
include an extra U.S. $30.00 for banking SIGNED with an original signature in ink, which shipped. Subsequent item(s) are shipped free. additional shipping charge above the flat-rate
fees. Your bank must forward your Name, will be kept on file. There can be no changes or al-
Address, Country, and Invoice Number with Items with fixed shipping rates will be charged shipping program, plus applicable hazardous
terations to any information on the copy of the FFL.
the transfer. We ship immediately. at time of shipment.
(2) Your order for controlled items will be shipped material charges.
to the address on the signed FFL. No other address SHIPPING RESTRICTIONS
EXTRA CHARGES: Are subject to change without
can be used. TRUCK SHIPPING
prior notice. Ground & Standard Shipping
WARRANTIES: All warranties, whether expressed Items that cannot be shipped by USPS
C.O.D.: $18.00 per order. or implied, are limited to those of the manufacturer. • USPS forbids the shipping of ORM-D and
Retail Ground, UPS or FedEx will be sent via
ADULT SIGNATURE REQUIRED: All FFL-
hazardous materials, including bluing salts,
CATALOG PRICES: Prices shown in this catalog are truck. We will ship by the fastest, most direct
restricted items require an additional $7.00 cold blues, hydrochloric acid, paint remover,
not intended to establish prices in any community way whenever possible. Heavy items that
fee for delivery confirmation with an adult
other than our place of business in Montezuma, Parkerizing solution, plating chemicals, rust
signature required. must be shipped via truck are noted in the
Iowa, at the time this catalog was published, July remover, Dicro-Clean #909, Comet Flux, gun
HAZARDOUS: All hazardous material ships 15, 2017. Price changes will be made without prior catalog. If you order one of these items, we will
oils and waxes, volatile petro solvents, and
alone and will include an additional single notice. call you with the truck charges. SORRY, BUT
other hazardous chemicals. ALL of these
charge per order mandated by shippers. Please All merchandise will be sold at the price in effect WE CANNOT SHIP C.O.D. MERCHANDISE
ask for current amount at time of order at Brownells, Inc. at the time the shipment is
restricted items must go UPS or FedEx
ORDERS BY TRUCK.
made. Ground in the continental U.S.A. Some
SATISFACTION GUARANTEED
Office/Tech: 641-623-5401
VISA/MC/Discover/Am Ex/IMPAC/CrossCheck/C.O.D.
PAGE 306 SINCE 1939