Professional Documents
Culture Documents
Fiirstwehavetoselectbrickfromthemodellingtaband definethemeasurementsasfollows:-
Xmin=-34.4 Xmax=34.4
Ymin=-33.1 Ymax=33.1
Zmin=-1.6 Zmax=0
Thenwewillselectthe materialas“NewMaterial“and mentionthedimensionforthematerialtoo.i.e
Epsiilo=4.7
Wewillgetthefollowingmodel:-
Thenwewilldesignapatchintheabovefigurebyselectingthebrickandmentionitsdimensions
Xmin=-1.45 Xmax=1.45
Ymin=-33.1 Ymax=0
Zmin=0 Zmax=0.105
Wewillselectthematerialascopper.
Themodelwilllookasfollowing:-
Wewillthendesignanotherpatchwhichisverticalwiththefollowingdimensions.
Xmin=1.4 Xmax=34.4
Ymin=0 Ymax=-1.33
Zmin=0 Zmax=0.105
Wewillselectthematerialascopper.
Thedesignwillbeasfollows:-
We will then go to simulation part and select waveguide port and will select our preference according to
ourmodel.Thedimensionsarefollowingandisgiveninthescreenshotbelow.
Our model will look like the one given in the picture below and will
mention its frequency as Fmin =1 and Fmax=1.4
Conclusion and Result:-
The following is the S-Parameter for the above diagram
Result:- The above model has been stimulated and performed.