Professional Documents
Culture Documents
SP 95-5
Grundfos SP are submersible borehole pumps, designed for
pumping groundwater. Grundfos SP are all stainless-steel
pumps, and they are available in 3 material grades. The
pumps are suitable for boreholes in sizes ranging from 4" over
6" and 8" to 10". The motor sizes for the pumps are available
in 0.37-250 kW.
10 10
P1 = 22.7 kW
P2 = 19 kW
NPSH = 3 m
0 0
1/21
Submittal Data
RP5
179 GN
1130
1947
817
139.5
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
2/21
Company name:
Created by:
Phone:
Date: 02/04/2020
Qty. Description
1 SP 95-5
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 22 kW MS6000 motor with sand shield, mechanical shaft seal, water-lubricated journal
bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good
mechanical stability and high efficiency. Suitable for temperatures up to 40 °C.
The motor is fitted with the Grundfos Tempcon sensor that, by use of powerline communication together with a
MP204 control panel, enables temperature monitoring.
The motor is for direct-on-line starting (DOL).
The elastomer parts in the pump are made of NBR (Nitrile-Butadiene Rubber) which ensures good wear
resistance and long service intervals.
In case the pump is used for pumping water with high content of hydrocarbons or solvents, Grundfos offers FKM
rubber parts (Fluorocarbon) which are oil and temperature-resistant up to 90 °C.
The pump is built with octagonal bearings with sand flush channels that minimise wear. As wear of the pump is
inevitable, the pump design allows for easy replacement of all internal wear parts (bearings, impeller, wear rings
and seal rings) to maintain high performance and a long lifetime.
Date: 02/04/2020
Qty. Description
The suction interconnector is fitted with a strainer to prevent large particles from entering the pump. The suction
interconnector is designed to comply with NEMA standards for motor mounting/dimensions.
Motor
The stator is hermetically encapsulated in stainless steel and the windings are embedded in polymer compound.
This results in high mechanical stability, optimum cooling and reduces the risk of short circuits in the windings.
The shaft seal faces are ceramic/carbon. The material combination provides good dry-running resistance.
Together with the shaft seal housing, the sand shield forms a labyrinth seal, which during normal operating
conditions prevents penetration of sand particles into the shaft seal.
The motor is fitted with the Grundfos Tempcon temperature sensor device that includes a NTC-resistor which
senses the temperature. The resistor is built-in close to the winding. The temperature is converted into a
high-frequency signal which is sent via the submersible drop cable and which can be converted into a temperature
reading by means of Grundfos MP204.
The MP204 is an electronic motor protection device that also monitors the supply network quality to protect the
submersible motor against supply network disturbances.
Liquid:
Pumped liquid: Water
Maximum liquid temperature: 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s
Technical:
Pump speed on which pump data are based: 2900 rpm
Actual calculated flow: 20.22 l/s
Resulting head of the pump: 71.5 m
Shaft seal for motor: CER/CARNBR
Approvals on nameplate: CE,GOST2
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Pump outlet: RP5
Motor diameter: 6 inch
Electrical data:
Date: 02/04/2020
Qty. Description
Motor type: MS6000
Rated power - P2: 22 kW
Power (P2) required by pump: 22 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 49.5-47.5-46.5 A
Starting current: 480-530-560 %
Cos phi - power factor: 0.86-0.84-0.82
Rated speed: 2850-2870-2880 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temp. transmitter: yes
Motor No: 78195518
Others:
Minimum efficiency index, MEI ≥: -.--
ErP status: EuP Standalone/Prod.
Net weight: 108 kg
Gross weight: 142 kg
Shipping volume: 0.264 m³
Danish VVS No.: 388345050
Finnish LVI No.: 4762775
Country of origin: SG
Custom tariff no.: 84137031
Date: 02/04/2020
On request SP 95-5 50 Hz
H SP 95-5, 3*380 V, 50Hz eta
[m] [%]
Q = 20.22 l/s
H = 71.5 m
Es = 0.3119 kWh/m³
n = 2876 rpm
Pumped liquid = Water
110 Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³
100
90
80
70
60
50 100
40 80
30 60
20 40
10 20
25 25
P1
20 20
P2
15 15
10 10
5 5
P1 = 22.7 kW
P2 = 19 kW
NPSH = 3 m
0 0
Date: 02/04/2020
H SP 95-5, 3*380 V, 50Hz eta
Description Value [m] [%]
Q = 20.22 l/s
General information: H = 71.5 m
Product name: SP 95-5 110 Es = 0.3119 kWh/m³
n = 2876 rpm
Product No: On request Pumped liquid = Water
100
EAN number: On request Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³
On request 90
Technical: 80
Pump speed on which pump data are
based: 2900 rpm 70
Actual calculated flow: 20.22 l/s
60
Resulting head of the pump: 71.5 m
Stages: 5 50 100
GN 179
RP5
Date: 02/04/2020
Description Value
EuP Standalone/Prod.
ErP status:
Net weight: 108 kg
Gross weight: 142 kg
Shipping volume: 0.264 m³
Danish VVS No.: 388345050
Finnish LVI No.: 4762775
Country of origin: SG
Custom tariff no.: 84137031
Date: 02/04/2020
On request SP 95-5 50 Hz
cos phi SP95-5 + MS6000 22 kW 3*380 V, 50 Hz I
eta [A]
cos phi
0.8 80
eta
0.6 60
0.4 40
0.2 20
P2 = 19 kW
cos phi = 0.85
Eta = 83.7 %
I = 40.48 A
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 P2 [kW]
n P1
[rpm] [kW]
P1
2800 40
2600 30
2400 20
2200 10
P1 = 22.7 kW
n = 2876 rpm
2000 0
Date: 02/04/2020
On request SP 95-5 50 Hz
RP5
179 GN
1130
1947
817
139.5
Date: 02/04/2020
On request SP 95-5 50 Hz
Y DOL
L1 L2 L3 PE L1 L2 L3 PE
W2 U2 V2 U1 V1 W1
U1 V1 W1 PE PE
M M
3 3
U1, W2 Brown
V1, U2 Black
W1, V2 Grey
Date: 02/04/2020
Order Data:
Product name: SP 95-5
Amount: 1
Product No: On request
Date: 02/04/2020
Exploded view
18b
8b
8a
23
11c
18
16
13
72
12
63
7
7 79
18a
8
9
14
78
17
19a
1
77
11
77a
71
28 19
13
70
15 72
12
20 7
39
22 6b
10
2 0
3b
11 3
1d
13
72
3a
12
Date: 02/04/2020
Sectional drawing
70
39
3b
1d
3a
6
8a
8b 4
11c
8 9
13
72
11
16
7
12
18
17
15
71
14
19
Date: 02/04/2020
( TM060554 MS6000 Model C for NEMO Project)
51
22
27
50 7a
32
24 42
32a
33
34
41
28
5 6
220a
3
220
2a
22a 45
1a
49
7
1
48
12
13
46
Date: 02/04/2020
(tm026425 0708)
27
25a
32
34
4
5
220
7a
51
2a
42
22
41
22a
1a
1
10a
10
45
47
11
49
7
2
48
12
13
46
TM026425
Date: 02/04/2020
Exploded view
Date: 02/04/2020
(tm026426 0503)
2 27
22 32
34 25a
2a
7a
42 11
41 47
45
10a
6 10
3 49
46 12
13
TM026426
Date: 02/04/2020
Sectional drawing
22
27
21 28
30
25
24
31
34 32
33
2a
41
42
6 7a
11 49
10a 7
45
10
46
47 12
48 13
Date: 02/04/2020
Spare parts SP 95-5, Product No. On request
Produced After 1424 (production year and week number)
Date: 02/04/2020
Pos Description Annotation Classification Data Part no. Qty. Unit
- 4 Chamber cpl. 96551517 1 pcs
6b Bulk, Bearing (5 pcs) 98183195 1
8b Stop ring 96590864 1
7 Bulk, Seal ring (10 pcs) 96603185 1 pcs
8a Washer 96551243 1 pcs
- 9 Bulk, Chamber cpl. (5 pcs) 97757857 4 pcs
7 Bulk, Seal ring (10 pcs) 96603185 1
8 Bulk, Bearing (2 pcs) 96537849 1
8 Bulk, Bearing (20 pcs) 96535348 1
+ 9 Chamber cpl. 96551514 4 pcs
13 Impeller cpl. 97658175 1 pcs
13 Bulk, Impeller cpl. (5 pcs) 97658174 4 pcs
13 Impeller cpl. 97658173 4 pcs
14 Suction interconnector 98587187 1 pcs
15 Strainer 96551402 1 pcs
+ 16 Shaft cpl. 97758897 1 pcs
+ 17 Strap cpl. Length (mm): 921 97895195 4 pcs
Thread: M16
+ 18 Cable guard cpl. 97895217 1 pcs
19 Bulk, Nut (4 pcs) 99543975 4 pcs
20 Motor cable 96164241 1 pcs
23 Rubber guard 96592219 1 pcs
28 Lock 98592002 1 pcs
+ 70 Valve guide 96590854 1 pcs
71 Bulk, Washer (10 pcs) 96537857 4 pcs
71 Bulk, Washer (10 pcs) 96535009 4 pcs
77a Bulk, Cross recess Pan head screw (20 pcs) 96551246 2 pcs
78a Bulk, Rivet (1000 pcs) 98976557 2 pcs
78 Bulk, Nameplate (100 pcs) 99534979 2 pcs