Professional Documents
Culture Documents
,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(4) Filter.................................................................................8
(6) Relay.............................................................................. 10
(7) Manometer.................................................................... 11
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(1)ECU kits
Main components for the burning gas system through collecting the fuel signal of the ECU control module
from original car, and integrate the signal of water temperature sensor, intake manifold pressure sensor,
intake air temperature sensor, gas temperature sensor, gas pressure sensor, sensor crank shaft position sensor ,
then the kits do the analysis processing, and send out the injunction to the burning gas mutual rail injection
valve, when the engine stopped the gas system will be cut off automatically.
Connection:48Pin
Suitable Fuel:CNG/LPG
Working voltage: DC10-15V
Rated voltage: DC12V
Injector rail resistance: ≥1Ω
Parameter:
Injector rail type: 4 cylinders
Nozzle simulation resistance: 150Q
Debug line: USB or RS232
Working temperature: -40C + 125C
Waterproof Level:IP65
System advantages:
◆ Adopt 48pin automobile waterproof connectors, Support 1-4 cylinder engine
◆ The debugging software has reasonable layout and complete functions
◆ Configure Freescale automotive grade chip, 16-bit dual-core single-chip microcomputer
◆ Optimized software and hardware design, strong anti-interference ability and low disturbing rate
◆ With real-time driving condition detection function, it will be transferred to petro immediately if a fault occurs
◆ With cold and hot car start, fuel blending and other functions
◆ Precise MAP correction, real-time correction of different speeds and loads
◆ A multi-point intelligent gas control system with perfect functions and extremely superior performance
◆ MP48OBD has a built-in original car reading module to monitor the engine in real time, adjust the gas injection
amount according to the short-term and long-term corrections, and control the air-fuel ratio within a reasonable range ,
which also solve the problem of the original car's light caused by the gas system
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
Connection:56Pin
Suitable Fuel:CNG/LPG
Working voltage: DC10-15V
Rated voltage: DC12V
Injector rail resistance: ≥1Ω
Parameter: Injector rail type: 3468 cylinders
Nozzle simulation resistance: 150Q
Debug line: USB or RS232
Working temperature: -40C + 125C
Waterproof Level:IP65
System advantages:
◆ Adopt 56pin automobile waterproof connectors
◆ Support 5-6-8 cylinder engine
◆ The debugging software has reasonable layout and complete functions
◆ Configure Freescale automotive grade chip, 16-bit dual-core single-chip microcomputer
◆ Optimized software and hardware design, strong anti-interference ability and low disturbing rate
◆ With real-time driving condition detection function, it will be transferred to petro immediately if a fault occurs
◆ With cold and hot car start, fuel blending and other functions
◆ Precise MAP correction, real-time correction of different speeds and loads
◆ A multi-point intelligent gas control system with perfect functions and extremely superior performance
◆ 2568D OBD has a built-in original car reading module to monitor the engine in real time, adjust the gas injection
amount according to the short-term and long-term corrections, and control the air-fuel ratio within a reasonable range ,
which also solve the problem of the original car's light caused by the gas system
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(2)Injector Rail
One part of gas engine air intake system,comprised of a group of jet nozzles, temperature and pressure
sensors, spray rail body, outlet nozzles and other components .
In the different conditions of the engine, according to the ECU control strategy [ECU calculated the
injection timing and pulse width (jet volume)], compressed natural gas injected into the gas rationing rail or
cylinder
Specification: 4-cylinder
Fuel Type: CNG/LPG
Working pressure: 0.5--2.5bar ( peak 5bar)
Voltage: DC12V ± 10%
Filtration: 40 microns
Inlet connection: Φ16 × Φ10 rubber tube
The two-port thread: M12 × 1
Parameter: Outlet connection: G1 / 8 thread,joint outer
diameter Φ7
The nozzle flow range: 1.0--3.5mm
Temperature range: -20 ℃ --120 ℃
Resistance: 3Ω
Opening time: 3.6~3.7ms
Off Time: 2.4ms
The high frequently rate :167HZ
Advantages:
◆Conversion smooth, strong power, low noise, suitable for a variety of oil-to-gas systems, such as AEB, D06, AC etc.
◆ High-quality -DT4C material processing, chemical nickel surface
treatment, and strong magnetic force plug etc.
◆ Imports of Valtek coil
1 Noise (lower doubled than the original )
2 low temperature rise , Fast response, easy installation (2~5 minutes
finish installation)
3 High conductivity magnetic, motivated, fast speed, high stability, response speed: 1.6 ms
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(3)CNG Reducer
The role of Reducers on LPG vehicles is mainly to evaporate liquid petroleum gas into gaseous state, and to
reduce pressure and stabilize pressure, so it is generally called an evaporative pressure reducer. Since a large
amount of heat is absorbed during the decompression process, the pressure reducer is generally provided
with a water jacket that introduces engine circulating water into the pressure reducer, and the heat of the
engine circulating cooling water is used to heat the pressure reducer.
Use: Automotive
Shell material: cast aluminum
Weight 1.8kg
Specification: 120x145x155 mm
Maximum input pressure: 26 MPa (260
bar)
Parameter: Primary pressure: 0.60 Mpa (6 bar)
Output pressure: 120 ~ 250 kPa
Coil voltage: 12 V DC **
Power: 17 W
Flow rate: 35 kg / h
Working temperature: -40 ° C / + 120 ° C
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
Material: Aluminum
Link form: slip-on connection
Nominal diameter: 4mm
Drive: solenoid
Flow: 43m³ / h
Weight: 1.5kg
Solenoid valve coil power: 20w
Safety valve opening pressure: 1.2Mpa
Parameter
Voltage range: 8V-12.5V
Voltage: DC12V
Rated working pressure: 20Mpa
Applicable Displacement: 0.8L-4.5L EFI
Automobile cars
Rated output pressure: 0.11Mpa-0.3Mpa
Dimensions: 188mm * 88mm * 135mm
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(4)Filter
CNG / LPG filter mainly filters and isolates impurities in the gas through the internal filter core, and then
comes out from the other end wiht the clean gas , which can prevent dust and dirt from entering the injector
rail and engine with CNG or LPG , thereby protecting the Injector rail and engine, and is an effective
protection for the performance and accessories of the car,It is an important equipment of the gas system ,
which is installed between the Reducer and the Injector rail always .
CNG&LPG Filter
Material : Aluminum
Shell thickness: 50MM
Total length: 100MM
Parameter:
Tubing thickness: 11.5MM long 23MM
Tubing inner diameter: 8MM
Advantages:
The iron shell has high hardness, but because the iron is easy to rust, the shell is treated with anti-corrosion
The aluminum shell has good anti-corrosion performance, and it is not easy to rust if it is not replaced for a long time.
Summary: It is not easy to rust if the aluminum shell is not replaced for a long time, and the iron shell is cost-effective
Maintain:
It is recommended to replace the filter from about 5,000 kilometers to 10,000 kilometers. If the impurities are not filtered,
it will cause a lot of wear when entering the Injector rail and the engine!
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
Used for the connection of the gas cylinder and reducer when the automobile oil is changed to gas
Advantages:
◆Each high-pressure pipe is tested for leaks and pressure in a full circle, and then tested separately.
There is no oxide layer on the inner and outer walls of the steel pipe. Withstand high pressure. No leakage. Each one is
tested by 350kg water pressure. Good finish. No deformation after cold bending; Flattening without cracks. Dust
treatment. Beautiful. Each one has a quality certificate.
This product has good bending processing characteristics, ultra-high blasting pressure, uniform thickness of cut and
coated PVC, high binding force, and product quality has reached the international advanced level.
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(6)Relay
Commonly used for automobile oil to gas conversion, used to control the connection and disconnection of
the gasoline pump fire wire, the relay is copper core, with light, double contact durable type, the plug wire is
ceramic shell, copper core circuit
Relay
Connection ways:
The 85-86 pin is connected to the positive and negative poles of the gas solenoid valve. During the
gas combustion, the relay coil generates magnetic force to control the switch.
The 30-87A pin is connected to the oil pump power cable , cut off the oil pump power cable, and
connect the 30-87A in series. When the gas solenoid valve is powered, the relay generates magnetic
force, and the relay will cut off the lower electrical signal.
Advantage :
◆The bottom of the epoxy resin is sealed to prevent water ingress and is firmly fixed!
◆The base is ceramic insulated and can be used after plugging in, which is convenient and fast!
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(7)Manometer
CNG gas pressure gauge is an important component of vehicles, installed on the valve or pipe and between
the CNG cylinder and pressure reducer . Main role is to convert the pressure of cylinder to electrical signal
then transmitted to the cab’ CNG switch by the sensor , easier to understand the capacity of natural gas
within the cylinder.
General Specifications
Product name CNG201C
Brand ACT
Sensor Type Optical sensor
Dial diameter Φ52.2mm
Thread Size 1/4 BSP
Over Pressure 520bar*20min
Burst Pressure >1000bar
Testing Pressure 400bar
Working 200bar
Pressure
Leakage Rate <1/100,000
Calibration accuracy 1.6%
F.S.
Working -40~120℃
Temperature
Durability >80,000 cycles
Certification ECE-R110
CNG201C use XH connector to install wires and heat shrink tube to
Water Proof IP65
increase water poof capacity . The wires can be installed and
Body Material Steel
ininstalled .There is a 150Ω resistance on the circuit to protect diode.
Suffix Input Output Remark
None +5V 40bar/4.0V~150bar/1.0V 12KΩ deviding resistance
-12 +12V sistance12KΩ deviding re 12KΩ deviding resistance
-F +5V 40bar/1.0V~150bar/4.0V 10KΩ deviding resistance
-F2 +12V 40bar/1.0V~150bar/4.0V 4.7KΩ deviding resistance
-F3 +12V 40bar/1.0V~150bar/4.0V 4.7KΩ installed, export volt directly
WEBSITE:WWW.ACTONG.CN
CHENGDU ACT TECHNOLOGY CO.,LTD
Add: No18. ChengHong Road, Longtan Indstrial Zone, Chengdu, Sichuan, China
Tel:+86-15928807960 E-mail: dawsondeng@actong.cn Contact : Dawson Deng
(8)Others Accessories
Other Accessories
WEBSITE:WWW.ACTONG.CN